GrandEye GE-P8002G-UT User manual

Shop No. 338/1, G.M. Complex, Ganthipuram Sixth St,
Gandipuram, Coimbatore, Tamil Nadu 641012 +0 98433 59251 [email protected]om
www.grandeye.net
GE-P8002G-UT
GE-P8002G-UT
8 Ports PoE Switch
8 PORTS POE SWITCH

The 8 ports PoE Ethernet Switch with 8 downlink PoE ports and double 1000Mbps uplink ports is a security surveillance Ethernet Switch
which is applicated in high definition network surveillance and security system. The product fully combines the characteristics of security
surveillance, provides fast packet forwarding rate and up to 7G backplane bandwidth, which ensures clear image and fluent video
transmission. Besides, the 8 downlink PoE ports support IEEE802.3af/at standard, and the double 1000Mbps uplink ports are reliable
assurance for connection between the surveillance system and external network connection. The ESD, 6KV lightning protection and
surge protection circuits improve product stability. Also the device supports one key CCTV mode which realizes VLAN function, restrains
thenetwork storm, protects the information security, prevents the virus spread and cyber attack, fully satisfies the Ethernet video security
surveillance system and Ethernet projects needs. security system. The product fully combines the characteristics of security surveillance,
provides fast packet forwarding ability and abundant backplane bandwidth, which ensures clear image and fluent transmission. Inserted
static, surge protection circuit can improve product stability. The product supports one key CCTV model, can achieve VLAN, QoS priority
after configuration, control the Net storm, protect the information security, prevent the viral transmission and Ethernet attack, fully satisfy
the Ethernet video security surveillance system and Ethernet project needs.
GE-P8002G-UT 8 Ports PoE Switch
Introduction
Board Diagram
Characteristics
Application
Front Board Back Board Side Board
GE-P8002G-UT
Major ports 2* Gigabit uplink Ethernet ports, which design is convenient to connect external network system;8* 10/100Mbps downlink PoE Ethernet
ports, each of them supports MDI/MDIX;
Special Function One Key CCTV Mode: Support VLAN and restrain network storm;1~8 downlink ports can only communicate with uplink ports; the
further transmission distance up to 250m in CCTV mode with the transmission speed rate 10Mbps;
Input Power DC48V~57V;
Transmission Distance: In Default mode, the distance of Ethernet port is 100m;In CCTV mode, the distance of downlink 1~8 ports up to 250m;
Standard Accord with IEEE802.3, IEEE802.3u, IEEE802.Saf, IEEE802.3at standard; PoE meets End-Span;
Protection superior lightning protection up to 6KV,excellent ESD protection and anti-interference ability.
Feature

3Web design & development for ActiveXplore
Characteristics
GE-P8002G-UT 8 Ports PoE Switch
Specification
Item
Transmission
Distance
PoE Ports
Pluse Group
Power LED
Downlink Ethernet port:0~250m（CCTV（
0~100m (Default)
Uplink Ethernet port:0~100m
RJ45 Ports with 30u Gold-plated Flattened Pin;Satisfy
Level 2 Per: IEC6 1 000-4-4
1pcs (Red)
Description
Ethernet Port LED
Characteristics
Please check the following items before installation, if it is missing,
please contact the dealer.
4 ports PoE Ethernet Switch 1pcs
Power adaptor 1pcs
AC Power Cable 1pcs
Accessories 1pcs
User Manual 1pcs
Please follow installation s teps as below:
Turn off the power of all the related devices before the installation;
otherwise the device would be damaged;
Use Ethernet cable connect PoE IP camera and 1~8 downlink ports
of product respectively;
Use an Ethernet cable to connect equipment uplink port with NVR
or computer;
Connect power adapter;
Check if the installation is correct, equipment is in good condition,
the connection is stable, then
power on for system.
Power Supply Power Adaptor
Voltage Range DC48V~54V
Consumption <5W
Rate 1~8 Downlink Ethernet port:10/100Mbps
9~10uplink Ethernet port:10/100/1000Mbps
Packet Forwarding
Rate
Data Package Cache
MAC
4.166Mbps
1.5Mb
4K
2pcs (Yellow& Green) on RJ45, Yellow Indicates PoE, Green
Indicates Link/Act
Surveillance Mode
LED
EFT
1pcs(Green), Green Indicates CCTV
-40（~85（
ESD
Lightning Protection
Operation
Temperature
Level 3 Per: IEC6 1 000-4-2
6KV Per: IEC6 1 000-4-5
-10（~+55（
Ethernet Standard
Backplane Band-
width
IEEE 802.3/802.3u/IEEE802.3 af/at
7G
Installation steps
Power
Port Parameter
Ethernet
Exchange
Indicator LED
Protection
Level
-40（~+85（
Storage Temperature
Humidity(noncon-
densing) 0~95%
Environment
Mechanics
Dimensions(LxWxH)
Material
Color
Weight
200mm×101.8mm×27mm
Metal
Black
500g
If any trouble in installation, please follow these steps:
Please make sure you have followed the instruction to install the device;
Please confirm if the RJ45 cable order is in accordance with the EIA/TIA568A or 568B industry standards;
The power supply of each PoE port is no more than 30W; please do not connect the PoE device which
exceeds the maximum PoE power supply;
Replace the equipment with a proper functioning 4 ports PoE Ethernet Switch to check if the epuipment is damaged
Please replace a failure device with a proper one to check if the device is broken;
Trouble shooting

GE-P8002G-UT 8 Ports PoE Switch
RJ 45 Making Method
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should conform with
EIA/TIA568A or 568B.
Shuck off about 2cm long the insulating layer, and bare the 4 pairs UTP cable;
Depart the 4 pairs UTP cable and straighten them;
Line up the 8 pieces of cables per EIA/TIA 568A or 568B;
Cut out 1.5 cm cable wrap and leave the bare wire;
Plug 8 cables into RJ45 plug, make sure each cable is in each pin;
Use the wire crimper to crimp it;
Follow the 5 steps above to make the another end, following the same sequence of the first plug;
Using network tester to test the cable whether is working.