Grandio GRA-STAGE User manual

GREENHOU S E S
GRANDIO
GREENHOUSE
TWO TIER STAGING TABLE
USER MANUAL
Model: GRA-STAGE
© 2013 Grandio Greenhouses, Backyard Living Source Inc. All rights reserved

1
THG-01 30x345x1200
THG-02
THG-03 75x75
PANEL
LEG SUPPORTS
ANGLE SUPPORTS
2
4
16
50
1
SCREW AND NUTSO2
W11 WRENCH
M6*10
30x35x75
PARTS LIST

THG-02
THG-01
THG-03
S02
2
1.1 Use a nut driver and wrench to tighten the
S02 screw and nut combination. Follow the
diagrams to put your greenhouse table together.
1.2 Attach THG-03, THG-01 to the THG-02 con-
nect using the provided S02 screws and nuts as
shown in diagram. Note that the THG-01 goes
inside. Install the THG-02 goes over the THG-03
as shown in the diagram.
1.3 Repeat these steps on all (8) corners of your
table, then double check all S02 Nut and Screw
combinations are tight.
INSTRUCTIONS