Grandstream Networks HandyTone-386 User manual

User Manual
HandyTone-386
Analog Telephone Adaptor
For Firmware Release Version 1.0.3.18
Grandstream Networks, Inc.
www.grandstream.com

HandyTone-386 User Manual Grandstream Networks, Inc.
Table of Contents
1WELCOME ......................................................................................................................4
2INSTALLATION.............................................................................................................. 5
3WHAT IS INCLUDED IN THE PACKAGE...................................................................7
3.1 SAFETY COMPLIANCES................................................................................................7
3.2 WARRANTY................................................................................................................. 7
4PRODUCT OVERVIEW..................................................................................................8
4.1 KEY FEATURES............................................................................................................ 8
4.2 HARDWARE SPECIFICATION ........................................................................................9
5BASIC OPERATIONS...................................................................................................10
5.1 GET FAMILIAR WITH VOICE PROMPT.........................................................................10
5.2 MAKE PHONE CALLS................................................................................................. 11
5.2.1 Calling phone or extension numbers.................................................................11
5.2.2 Direct IP calls....................................................................................................11
5.2.3 Call Hold ...........................................................................................................12
5.2.4 Call Waiting.......................................................................................................12
5.2.5 Call Transfer......................................................................................................12
5.2.6 3-way Conferencing...........................................................................................13
5.2.7 PSTN Pass Through...........................................................................................13
5.3 CALL FEATURES........................................................................................................ 14
5.3.1 Call Features Table (Star Code) .......................................................................14
5.3.2 PSTN Pass Through / Life Line......................................................................... 15
5.4 FAX SUPPORT........................................................................................................... 15
5.5 LED LIGHT PATTERN INDICATION ...................... ERROR!BOOKMARK NOT DEFINED.
6CONFIGURATION GUIDE ..........................................................................................16
6.1 CONFIGURING HANDYTONE-386 LAN IP THROUGH VOICE PROMPT........................16
6.1.1 DHCP Mode ......................................................................................................16
6.1.2 STATIC IP Mode................................................................................................16
6.1.3 TFTP Server Address.........................................................................................16
6.2 CONFIGURING HANDYTONE-386 WITH WEB BROWSER ............................................16
6.2.1 Access the Web Configuration Menu.................................................................16
6.2.2 End User Configuration ....................................................................................17
6.2.3 Advanced Configuration and FXS ports Parameters........................................21
6.2.4 Saving the Configuration Changes.................................................................... 32
6.2.5 Rebooting the HandyTone-386 from Remote ....................................................32
6.3 CONFIGURATION THROUGH A CENTRAL SERVER....................................................... 33
7SOFTWARE UPGRADE...............................................................................................34
7.1 FIRMWARE UPGRADE THROUGH TFTP/HTTP...........................................................34
7.2 CONFIGURATION FILE DOWNLOAD ........................................................................... 35
2

HandyTone-386 User Manual Grandstream Networks, Inc.
7.3 FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX....................................35
7.4 MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD ..............................35
8RESTORE FACTORY DEFAULT SETTING…………………………………..36
9 APPENDIX I GLOSSARY OF TERMS……………………………………………...37
3

HandyTone-386 User Manual Grandstream Networks, Inc.
1Welcome
Congratulations on becoming an owner of HandyTone-386. You made an excellent choice and we
hope you enjoy all of its capabilities.
Grandstream's HandyTone-386 is an all-in-one VoIP integrated access device that features superb
audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The
HandyTone-386 is fully compatible with SIP industry standard and can interoperate with many other
SIP compliant devices and software on the market.
Grandstream HandyTone-386 is a new addition to the popular HandyTone product family. The new
HandyTone-386 features two FXS ports each with independent SIP accounts.
This document is subject to changes without notice. The latest electronic version of this user manual
can be downloaded from the following location:
http://www.grandstream.com/y-downloads.htm
4

HandyTone-386 User Manual Grandstream Networks, Inc.
2Installation
HandyTone-386 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a
total solution for networks providing VoIP services.
The HandyTone-386 VoIP functionalities are available via regular analog telephones.
The following photo illustrates the appearance of a HandyTone-386.
Top View Side Views
RJ-45 10M
Ethernet LAN Port
RJ-11
FXS Port 1
+5V/1.2A
RJ-11
Line Port
(Line )
RJ-11
FXS Port 2
BUTTON
RED LED
GREEN LED
Interconnection Diagram of the HandyTone-386:
2.1
2.2
Fax
Cordless Phone
Analog Phone
Internet ADSL/Cable
Modem or Ethernet
PSTN Line
LINE
LAN
FXS 2 FXS 1
Analog Phone
Cordless Phone
Fax
HandyTone-386 has two FXS ports. The RJ-11 jack next to the LAN is called FXS port 2 and the RJ-
11 jack on the corner is called FXS port 1. The RJ-11 jack on the side on of the HandyTone-386 is a
LINE port or PSTN pass-through port. Each FXS port can have a separate SIP account. This is a key
feature of HandyTone-386. Both ports can make calls concurrently.
5

HandyTone-386 User Manual Grandstream Networks, Inc.
Following are the steps to install a HandyTone-386:
1. Connect a standard touch-tone analog telephone (or fax machine) to FXS port 1.
2. Connect another standard touch-tone analog telephone (or fax machine) to FXS port 2.
3. Insert a standard telephone cable into the LINE port of HandyTone-386 and connect the other
end of the telephone cable to a wall jack.
4. Insert the Ethernet cable into the LAN port of HandyTone-386 and connect the other end of the
Ethernet cable to an uplink port (a router or a modem, etc.)
5. Insert the power adapter into the HandyTone-386 and connect it to a wall outlet.
Please follow the instructions in section 6.2.1 to configure the HandyTone-386.
6

HandyTone-386 User Manual Grandstream Networks, Inc.
3What is Included in the Package
The HandyTone-386 package contains:
1) One HandyTone-386
2) One universal power adaptor
3) One Ethernet cable
3.1 Safety Compliances
The HandyTone-386 is compliant with various safety standards including FCC/CE and C-tick. Its
power adaptor is compliant with UL standard. The HandyTone-386 should only operate with the
universal power adaptor provided in the package.
3.2 Warranty
Grandstream has a reseller agreement with our reseller customer. End users should contact the
company from whom you purchased the product for replacement, repair or refund.
If you purchased the product directly from Grandstream, contact your Grandstream Sales and Service
Representative for a RMA (Return Materials Authorization) number.
Grandstream reserves the right to remedy warranty policy without prior notification.
Warning: Please do not attempt to use a different power adaptor. Using other power adaptor may
damage the HandyTone-386 and will void the manufacturer warranty.
Caution: Changes or modifications to this product not expressly approved by Grandstream, or
operation of this product in any way other than as detailed by this User Manual, could void your
manufacturer warranty.
Information in this document is subject to change without notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose without
the express written permission of Grandstream Networks, Inc..
7

HandyTone-386 User Manual Grandstream Networks, Inc.
4Product Overview
4.1 Key Features
•Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS,
DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc.
•Supports dual SIP accounts via dual FXS ports
•Powerful digital signal processing (DSP) to ensure superb audio quality; advanced adaptive
jitter control and packet loss concealment technology
•Support various codecs including G.711 (PCM a-law and u-law), G.723.1 (5.3K/6.3K), G.726
(32K), as well as G.729A, and iLBC.
•Support Caller ID/name display or block, Call waiting caller ID, Hold, Call Waiting/Flash, Call
Transfer, Call Forward, 3-way conferencing, in-band and out-of-band DTMF, etc.
•Support fax pass through (for PCMU and PCMA) and T.38 FoIP (Fax over IP).
•Support syslog
•Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise
Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)
•Support standard encryption and authentication (DIGEST using MD5 and MD5-sess)
•Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
•Support automated NAT traversal without manual manipulation of firewall/NAT
•Support device configuration via built-in IVR, Web browser or Central configuration files
through TFTP or HTTP server
•Support firmware upgrade via TFTP or HTTP.
•Support PSTN pass through.
•Ultra compact (wallet size) and lightweight design, great companion for travelers.
•Compact, lightweight Universal Power adapter.
8

HandyTone-386 User Manual Grandstream Networks, Inc.
9
4.2 Hardware Specification
The table below lists the hardware specification of HandyTone-386.
Model HandyTone-386
LAN interface 1xRJ45 10Base-T
FXS telephone port 2 x FXS
PSTN Port 1x PSTN pass-through or life line port
Button 1
LED Green and Red color
Universal Switching
Power Adaptor Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA
UL certified
Dimension 70mm (W)
130mm (D)
27mm (H)
Weight 0.6lbs (0.3kg)
Temperature 40 - 130oF
5 – 45oC
Humidity 10% - 90%
(non-condensing)
Compliance

HandyTone-386 User Manual Grandstream Networks, Inc.
10
5Basic Operations
5.1 Get Familiar with Voice Prompt
HandyTone-386 has stored a voice prompt menu for quick browsing and simple configuration.
Currently, the voice prompt menu and the LED button is designed for FXS port 1 ONLY.
To enter this voice prompt menu, simply press the button or “***” from the analog phone.
Menu Voice Prompt User’s Options
Main Menu “Enter a Menu Option” Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 01 – 06, 47, 86 or 99 Menu option
01 “DHCP Mode”,
“Static IP Mode” Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need
configure the all IP address information
through menu 02 to 05. If user selects
“Dynamic IP Mode”, the device will retrieve
all IP address information from DHCP server
automatically when user reboots the device.
02 “IP Address “ + IP address The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP
Mode.
03 “Subnet “ + IP address Same as menu 02
04 “Gateway “ + IP address Same as menu 02
05 “DNS Server “ + IP address Same as menu 02
06 “TFTP Server “ + IP address Same as menu 02
47 “Direct IP Calling” When entered, user will be prompted a dial
tone, dial a 12-digit IP address to make a direct
IP call.
(For details, see “4.2.2 Make a Direct IP
Call”.)
99 “RESET” Enter “9” to reboot the device; or
Enter MAC address to restore factory default
setting (For details, see section 8.)
“Invalid Entry” Automatically return to Main Menu
NOTE:
•Once the button is pressed, it enters the voice prompt main menu. If the button is pressed again,
while it is already in the voice prompt menu, it jumps to “Direct IP Call” option and a dial
tone is prompted
•“*” shifts down to the next menu option
•“#” returns to the main menu
•“9” functions as the ENTER key in many cases to confirm an option

HandyTone-386 User Manual Grandstream Networks, Inc.
11
•All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (like 192.168.0.26
should be key in like 192168000026, no dot needed while input). Once all of the digits are
collected, the input will be processed.
•Key entry can not be deleted but the phone may prompt error once it is detected
5.2 Make Phone Calls
5.2.1 Calling phone or extension numbers
There are currently two methods to make an extension number call:
a) Dial the numbers directly and wait for 4 (default) seconds.
b) Dial the numbers directly, and press # (assuming that “use #” as dial key is selected in web
configuration).
Examples:
•To dial another extension on the same proxy, such as 1008, simply pick up the attached phone,
dial 1008 and then press the # or wait for 4 seconds.
•To dial a PSTN number such as 6266667890, you might need to enter in some prefix number
followed by the phone number. Please check with your VoIP service provider to get the
information. If you phone is assigned with a PSTN-like number such as 6265556789, most
likely you just follow the rule to dial 16266667890 as if you were calling from a regular analog
phone of North America, then followed by pressing # or wait for 4 seconds.
5.2.2 Direct IP calls
Direct IP calling allows two parties, that is, a HandyTone with an analog phone and another VoIP
Device, to talk to each other in an ad hoc fashion without a SIP proxy. This kind of VoIP calls can be
made between two parties if:
•Both HT386 and other VoIP Device(i.e., another HandyTone ATA or Budgetone SIP phone or
other VoIP unit) have public IP addresses, or
•Both HT386 and other VoIP Device are on the same LAN using private IP addresses, or
•Both HT386 and other VoIP Device can be connected through a router using public or private
IP addresses (with necessary port forwarding or DMZ).
To make a direct IP call, first pick up the analog phone or turn on the speakerphone on the analog
phone, then access the voice menu prompt by dial “***” or press the button on the HandyTone-286,
and dials “47” to access the direct IP call menu. User will hear a voice prompt “Direct IP Calling” and
a dial tone. Enter a 12-digit target IP address to make a call. Destination ports can be specified by
using “*4” (encoding for “:”) followed by the port number.
Examples:

HandyTone-386 User Manual Grandstream Networks, Inc.
12
If the target IP address is 192.168.0.10, the dialing convention is
Voice Prompt with option 47, then 192 168 000 010
followed by pressing the “#” key if it is configured as a send key or wait for more than 5 seconds.
If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:
Voice Prompt with option 47, then 192168001020*45062 followed by pressing the “#” key if it is
configured as a send key or wait for 4 seconds.
NOTE:
•When doing direct IP call, the “Use Random Port” should set to “NO”.
•You can NOT make direct IP calls between FXS1 to FXS2 since they are using same IP.
5.2.3 Call Hold
While in conversation, pressing the “flash” button on the attached analogue phone (if the phone has
that button) will put the remote end on hold. Pressing the “flash” button again will release the
previously held party and the bi-directional media will resume. If no “flash” button, then on-off hook
quickly (hook flash) will do the same thing but also risk of losing call if the time is not short enough.
5.2.4 Call Waiting
If call waiting feature is enabled, while the user is in a conversation, he will hear a special stutter tone
if there is another incoming call. User can press the flash button to put the current call party on hold
and switch to the other call. Pressing flash button toggles between two active calls.
5.2.5 Call Transfer
5.2.5.1 Blind Transfer
Assume that call party A and B are in conversation. A wants to Blind Transfer B to C:
1. A press FLASH on the analog phone to hear the dial tone.
2. Then A dials *87 then dials C’s number, and then #(or wait for 4 seconds)
3. A can hang up.
NOTE:
•“Enable Call Feature” has to be set to “Yes” in web configuration page.
A can hold on to the phone and await one of the three following behaviors:
•A quick confirmation tone (temporarily using the call waiting indication tone) followed by a
dial tone. This indicates the transfer is successful (transferee has received a 200 OK from
transfer target). At this point, A can either hang up or make another call.

HandyTone-386 User Manual Grandstream Networks, Inc.
13
•A quick busy tone followed by a restored call (on supported platforms only). This means the
transferee has received a 4xx response for the INVITE and we will try to recover the call. The
busy tone is just to indicate to the transferor that the transfer has failed.
•Busy tone keeps playing. This means we have failed to receive the second NOTIFY from the
transferee and decided to time out. Note: this does not indicate the transfer has been
successful, nor does it indicate the transfer has failed. When transferee is a client that does not
support the second NOTIFY (such as our own earlier firmware), this will be the case. In bad
network scenarios, this could also happen, although the transfer may have been completed
successfully.
5.2.5.2 Attended Transfer
Assume that call party A and B are in conversation. A wants to Attend Transfer B to C:
1. A presses FLASH on the analog phone to get a dial tone
2. A then dial C’s number followed by # (or wait for 4 seconds).
3. If C answers the call, A and C are in conversation. Then A can hang up to complete transfer.
4. If C does not answer the call, A can press “flash” back to talk to B.
NOTE:
•When Attended Transfer failed and A hang up, the HandyTone- 386 will ring user A back again
to remind A that B is still on the call. A can pick up the phone to restore conversation with B.
5.2.6 3-way Conferencing
Assume that call party A and B are in conversation. A wants to bring C in a conference:
1. A presses FLASH (or Hook Flash for old model phones) to get a dial tone.
2. A dials *23 then C’s number then # (or wait for 4 seconds).
3. If C answers the call, then A press “flash” to bring B, C in the conference.
4. If C does not answer the call, A can press “flash” back to talk to B.
NOTE:
•If the conference organizer, this case, A, drop the call, all three party will be dropped.
5.2.7 PSTN Pass Through
HandyTone-386 supports PSTN pass through on FXS port 1. User can make and receive PSTN calls
with attached analog phone in Phone 1 port. Phone 2 port (or FXS port 2) does NOT have this feature.
•To receive PSTN calls, simply make phone off hook when the analog phone rings.

HandyTone-386 User Manual Grandstream Networks, Inc.
14
•To make a PSTN call, simply press the PSTN access code (*00 is default, or any number
configured in web configuration page) to switch to the PSTN line and get dial tone, then dial
the number.
5.3 Call Features
5.3.1 Call Features Table (Star Code)
Following table shows the call features (* code) of HandyTone-386.
Key Call Features
*23 3 way Conferencing
Refer 5.2.6 above for procedure to perform 3 way Calling.
*30 Block CallerID (for all-config change)
*31 Send CallerID (for all-config change)
*67 Block CallerID (per call)
*82 Send CallerID (per call)
*50 Disable Call Waiting (for all-config change)
*51 Enable Call Waiting (for all-config change)
*70 Disable Call Waiting. (Per Call)
*71 Enable Call Waiting (Per Call)
*72 Unconditional Call Forward.
To use this feature, dial “*72”, wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
*73 Cancel Unconditional Call Forward
To cancel “Unconditional Call Forward”, dial “*73” and get the
dial tone, then hang up.
*87 Blind Transfer
Refer 5.2.5.1 above for procedure to perform Blind Transfer.
*90 Busy Call Forward
To use this feature, dial “*90”, wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
*91 Cancel Busy Call Forward
To cancel “Busy Call Forward”, dial “*91” and get the dial
tone, then hang up
*92 Delayed Call Forward
To use this feature, dial “*92”, wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
*93 Cancel Delayed Call Forward
To cancel this Forward, dial “*93” and get the dial tone, then
hang up
Flash/Hook When in conversation, this action will switch to the new
incoming call if user heard the call waiting sound.
When in conversation and no incoming call heard, this action
will switch to a new channel for a new call.

HandyTone-386 User Manual Grandstream Networks, Inc.
15
5.3.2 PSTN Pass Through / Life Line
When HandyTone-386 is out of power, the RJ-11 line jack on the HandyTone-386 side will function as
a pass through jack. The user will be able to use the analog phone for PSTN calls directly without press
the access code.
5.4 FAX Support
HandyTone 386 supports FAX in two modes: T.38 (Fax over IP) and fax pass through. T.38 is the
preferred method because it is more reliable and works well in most network conditions. If the service
provider supports T.38, please use this method by selecting Fax mode to be T.38 (default). If the
service provider does not support T.38, pass-through mode may be used. To send or receive faxes in
fax pass through mode, users must select all the Preferred Codecs to be PCMU/PCMA (G.711-u/a).
5.5 LED Light Pattern Indication
Following are the LED light pattern indications.
RED LED always indicates not abnormal status
DHCP Failed or WAN No Cable Button flashes every 2 seconds (if DHCP is configured)
HandyTone-486 fails to register Button flashes every 2 seconds (if SIP server is configured)
Firmware Upgrading Button flashes every 2 seconds
Device Malfunctions Red light steady on
GREEN LED mostly indicates normal working status
Message Waiting Indication Button flashes every 2 seconds
RINGING Button flashes at 1/10 second
RINGING INTERVAL Button flashes every second
In Conversation Green light steady on

HandyTone-386 User Manual Grandstream Networks, Inc.
16
6Configuration Guide
6.1 Configuring HandyTone-386 LAN IP through Voice Prompt
6.1.1 DHCP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-386 to use DHCP.
6.1.2 STATIC IP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-386 to use STATIC IP mode, then
use option 02, 03, 04 to set up HandyTone-386’s IP, Subnet Mask, Gateway respectively.
6.1.3 TFTP Server Address
Follow section 5.1 with voice menu option 06 to configure the IP address of the TFTP server.
6.2 Configuring HandyTone-386 with Web Browser
HandyTone-386 ATA has an embedded Web server that will respond to HTTP GET/POST requests. It
also has embedded HTML pages that allow users to configure the HandyTone-386 through a Web
browser such as Microsoft’s IE, AOL’s Netscape or Mozilla Firefox.
6.2.1 Access the Web Configuration Menu
First, get the IP address of the HandyTone-386 through section 5.1 with menu option 02. Then access
the HandyTone-386’s Web Configuration Menu using the following URI:
http://Phone-IP-Address
where the Phone-IP-Address is the IP address of the phone.
NOTE:
•To type IP address into browser to get the configuration page, please strip out the announced
leading “0” as the browser will parse in octet. e.g.: if the IP address reported: 192.168.001.014,
please type in: 192.168.1.14.

HandyTone-386 User Manual Grandstream Networks, Inc.
17
6.2.2 End User Configuration
Once this HTTP request is entered and sent from a Web Browser, the HandyTone-386 will respond
with the following login screen:
Grandstream Device Configuration
Password
Lo
g
in
All Rights Reserved Grandstream Networks, Inc. 2005
The password is case sensitive with maximum length of 25 characters. The factory default password
for End User and administrator is “123” and “admin” respectively. Only administrator can get access
to the “ADVANCED SETTING” configuration page.
NOTE:
•If you CAN NOT log into the configuration page by using default password, please check with
the VoIP service provider. Most likely the VoIP service provider has provisioned the device
and configured for you therefore the password has already been changed.

HandyTone-386 User Manual Grandstream Networks, Inc.
18
After a correct password is entered in the login screen, the embedded Web server inside the
HandyTone-386 will respond with the Configuration pages which are explained in details below.
•Status Page:
Grandstream Device Configuration
STATUS BASIC
SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2
MAC Address: 00.0B.82.00.00.00
IP Address: 192.168.1.109
Product Model: HT386
Software Version: Program-- 1.0.3.18 Bootloader-- 1.0.8.9 HTML-- 1.0.3.18 VOC-- 1.0.0.10
S
y
stem Up Time: 0 day(s) 0 hour(s) 2 minute(s)
Registered: Yes
PPPoE Link Up: disabled
NAT: detected NAT type is full cone
All Rights Reserved Grandstream Networks, Inc. 2005
MAC Address The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
IP Address This field shows IP address of the HT386.
Product Model This field contains the product model info, such as HT386.
Software Version Program: This is the main software release. This number is always
used for firmware upgrade. Current release is 1.0.3.21
Bootloader: current version is 1.0.8.9.
HTML: current version 1.0.3.21.
VOC: current version is 1.0.0.10.htm
System Uptime This shows system up time since last reboot.
Registered Whether the unit is registered to service provider’s server.
PPPoE Link Up This shows whether the PPPoE is up if connected to DSL modem
NAT This shows what kind NAT the HT386 is connected to. It is based on
STUN protocol. If the detected NAT is symmetric NAT, STUN will not
work and Outbound Proxy needed to make HT386 functioning
correctly.

HandyTone-386 User Manual Grandstream Networks, Inc.
19
•Basic Settings Page:
Grandstream Device Configuration
STATUS BASIC
SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2
End User
Password: (purposely not displayed for security protection)
IP Address: dynamically assigned via DHCP (default) or PPPoE
(will attempt PPPoE if DHCP fails and following is
non-blank)
PPPoE account ID:
PPPoE password:
PPPoE Service Name:
Preferred DNS server: 0.0.0.0
statically configured as:
IP Address: 192 .168 .0.160
Subnet Mask: 255 .255 .255 .0
Default Router: 192 .168 .0.1
DNS Server 1: 192 .168 .0.1
DNS Server 2: ...
Time Zone: GMT-5:00 (US Eastern Time, New York)
Da
y
li
g
ht Savin
g
s
Time: No Yes (if set to Yes, display time will be 1 hour ahead of normal
time)
PSTN access
code: (key pattern to use the PSTN line, default is "*00")
Update
All Rights Reserved Grandstream Networks, Inc. 2005
End User
Password This contains the password for end user to access the Web Configuration
Menu. User can put new password here. This field is case sensitive with
maximum of 25 characters

HandyTone-386 User Manual Grandstream Networks, Inc.
20
IP Address - If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HT386 will acquire its IP address from DHCP in the network.
PPPoE settings is usually for DSL/ADSL modem users. The HandyTone will
attempt to establish a PPPoE session if PPPoE account is set.
- If Static IP mode is selected, the IP address, Subnet Mask, Default Router
IP address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields need
to be configured.
Time Zone Displayed date/time will be adjusted according to the specified time zone.
Daylight Savings Time Default NO. If set to Yes, then the displayed time will be 1 hour ahead of
normal time.
PSTN Access Code Default is “*00”, user can change it. By pressing the code user can switch
the phone to PSTN line connected to the Line port of ATA and make PSTN
outgoing calls. This is called PSTN Pass Through.