Granit 61099049 User manual

Operating Instructions
Pump
61099049
These operating instructions must be read thoroughly before use and followed. These Operating
Instructions must be retained for future reference.
Translation of the original operating instructions

Compressor Operating Instructions
61099049
2
Table of contents
1. About these operating instructions and symbol descriptions ................................................... 3
2. Safety and accident prevention rules ................................................................................... 3
3. Performance specifications ................................................................................................. 5
3.1. Intended use ............................................................................................................. 5
3.2. Technical data ........................................................................................................... 5
3.3. Main components ....................................................................................................... 6
3.4. Getting the machine ready for operation ....................................................................... 6
3.5. Oil level .................................................................................................................... 7
4. Compressor operation ....................................................................................................... 8
4.1. Preparation for use..................................................................................................... 8
4.2. Using the compressor ................................................................................................. 9
4.3. Operating a pressure tank ..........................................................................................10
4.4. Operation at cold temperatures...................................................................................10
4.5. Operating the equipment ...........................................................................................10
4.6. Switching off the compressor......................................................................................11
5. Maintenance and care.......................................................................................................11
5.1. General maintenance instructions................................................................................11
5.2. Maintenance plan ......................................................................................................12
5.3. Cleaning ..................................................................................................................12
5.4. Cleaning/replacing the air filter ...................................................................................13
5.5. Draining condensate..................................................................................................13
5.6. Oil replacement ........................................................................................................13
6. Storage and transport ......................................................................................................14
7. Disposal..........................................................................................................................14
8. Fault rectification .............................................................................................................15
9. Component drawing with installation position ......................................................................16
10. Replacement parts list...................................................................................................17
11. Scope of delivery..........................................................................................................18
12. EG Declaration of Conformity .........................................................................................19
13. Warranty .....................................................................................................................20
14. Addresses....................................................................................................................20
15. Legal Notice.................................................................................................................20

Compressor Operating Instructions
61099049
3
1. About these operating instructions and symbol
descriptions
The information in these Operating Instructions is labelled as follows:
ATTENTION
Warning of personal injury or environmental damage. Incorrect
operation can lead to serious injury or death.
IMPORTANT
Warning of property damage. Incorrect operation or negligence
may result in personal injury, damage to the equipment or
faulty measurements.
NOTE
Additional information. Instructions and tips for operation.
Numbers in illustrations (1, 2, 3 ...) refer to the corresponding numbers in brackets
(1), (2), (3) ... in the text next to the item numbers in the tables.
Instructions for which the order must be followed are numbered (1, 2, 3, ...).
Lists are marked with bullet points (●, ●, ...).
Symbol labels on the device with their meaning:
Wear hearing protection when operating the machine.
EU conformity symbol
Caution, danger from electric current.
Warning of automatic start-up.
Warning of hot surfaces.
2. Safety and accident prevention rules
These operating instructions were prepared so that you can work safely with the
equipment.
People who are not familiar with these instructions should not perform these actions.
Read these Operating Instructions thoroughly before use. Pay particular attention to the
safety instructions.
These Operating Instructions are intended for people with basic technical understanding of
the use of equipment such as that described here.

Compressor Operating Instructions
61099049
4
If you have no experience with such equipment, you should first get assistance from
experienced people.
Keep all supplied documents with the equipment for future reference if required. Keep the
purchase receipt for any warranty claims.
If you lend or sell the equipment, supply all documentation with it.
Observe the operating and maintenance instructions found in this manual.
Maintenance should be performed at the prescribed intervals and in the prescribed scope.
Following maintenance work, all dismantled protective devices must be properly
reinstalled. The protective devices and their protective functions should be inspected by a
competent person before using the machine.
Defective equipment must be repaired promptly in order to minimize the extent of damage
and avoid endangering the safety of the equipment.
The compressor may only be used and operated under the conditions laid down in these
operating instructions.
Retrofits, changes or modifications to the equipment are strictly prohibited. They require
consultation with and written approval by the manufacturer.
If during operation (residual) hazards and risks become apparent which are not described
in this manual, the operator is obliged to report this to the manufacturer.
Do not change the setting of the safety valve. Before each use, check that the equipment
is functioning properly and that the lines are not leaking.
Compressed air under high pressure can cause severe or fatal injury! If injured contact a
physician immediately!
Before each use always perform a visual and a function check of the equipment to identify
damage and worn parts, and arrange for their repair by trained personnel before use.
After opening the packaging check that all components are complete and undamaged. If
components are missing or damaged, contact your dealer immediately and use the device
only after approval by the dealer.
Warning: Clogged oil filters or valve failure will result in insufficient lubrication.
Make sure that the oil cooling devices are kept clean and that the protective equipment
remains in working order.
Warning: All hoses and fittings of road-driven compressors must be suitable for use on
construction sites at the maximum allowable pressure.
It is recommended that feed hoses be fitted with a safety cable, e.g. a wire rope, for
pressures above 7 bar.
The machine must always be placed on a level and horizontal surface and may not be
tilted.

Compressor Operating Instructions
61099049
5
3. Performance specifications
3.1. Intended use
The compressor is an oil lubricated air compressor. The ambient air is sucked in via the intake
filter and cleaned. The air drawn in is then compressed in the cylinder. The compressed air
flows into the pressure tank and is now available to supply the connected compressed air
tools. This compressor is designed exclusively for compressing air.
NO flammable gases and/or paint and dust mist may be sucked in with this compressor. It
may not be used in potentially explosive atmospheres as this may lead to serious or fatal
accidents with high material damage.
The suction of flammable gases etc. can lead to deflagration and explosions. This can
result in serious to fatal injuries and extensive damage to property!
The compressor has a finger guard and is thus protected against the penetration of medium-
sized foreign bodies (from Ø 12.5 mm).
It is not protected against the penetration of liquids. Therefore the equipment must not be
used in damp or wet rooms or outdoors in the rain. Always ensure that it is stored and used
in a dry place.
Penetration of foreign bodies and liquids can damage the unit and considerably
reduce its performance and service life.
Any other use or use that exceeds this is considered as not in accordance with the intended
purpose.
3.2. Technical data
Data
Model
BM
Performance
1 kW (1.4 pS) & 1.5 kW (2 pS) & 1.8 kW (2.4 pS)
Voltage (V)
220 / 230 / 240
220 / 230 / 240
220
Frequency (Hz)
60
50
60
60
Current strength (A)
15
7.5
7.5
5.5
Switch poles
2p
2p
2p
4p
Max. U./min.
3450
2850
2850
1750
Theoretical output
(m³/min.)
0,21
Autostop pressure
115 pSi (0.8 MPa)
Restart pressure
70 pSi (0.5 Mpa)
Tank content (l)
24
30
40
50
Dimensions (cm)
60x29x64
69x32x64
69x30x71
77x33x73
Connection
¼“
Weight (kg)
28
31
33
38
The unit may not be used in explosive atmospheres. The compressor may only be operated
at ambient temperatures between 5-40 °C.