GRASS VALLEY 8943RDA-DFR User manual

Specifications
89003FR-R
J1 J2
J3 J4
J5 J6
J7
1
2
J8
J10
FIBER
Out
Out
Out
Out
In
Out
Out
Out
In
Fiber I/O
Connector
Ordering Information
Specifications
Supported Frame Types
GeckoFlex frame
Power Rating
5.2 Watts (no SFP fiber submodule) – single slot
5.9 Watts (with SFP fiber submodule) – single slot
Inputs
SD/HD/3G-SDI: Two electrical inputs (J10 and J8) and
2 optional single-mode fiber optic inputs (with dual
receiver), or 1 optional fiber optic input (with transceiver)
•Inputequalization(Belden1694Acable)
90m for 3 Gb/s (Input 1, J10)
100m for 3 Gb/s (Input 2, J8)
140m for 1.5 Gb/s
400m for 270 Mb/s
•Returnloss:>15dB:upto1.5Gb/s,
10 dB (typical) up to 3 Gb/s
Formats supported:
•SD-SDI
•HD-SDI
•3G-SDI
•DVBASI
Outputs
SD/HD/3G-SDI: Seven reclocked electrical outputs
(in four output pairs (J1/J2, J3/J4, J5/J6, and J7)
and two single-mode fiber optic outputs (with dual
transmitter option, or one fiber optic output (with
transceiver option)
•Returnloss:HD>15dBupto1.5Gb/s,
>10 dB up to 3 Gb/s
•Signallevel:800mV±10%
•Outputjitter(forinputsconformingtoSMPTE259M
and 292M standards):
<0.2 UI >100 kHz for 3G
<0.2 UI >100 kHz for HD
<1.0 UI 10 Hz – 100 kHz for HD
<0.2 UI 10 Hz – up for SD
DVB ASI: Seven non-inverted outputs (in output pairs)
Electrical Length (input to output latency in ns) :
CH1: Input J10 to Output J1:
3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns
HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns
SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
CH2: Input J8 to Output J1:
3G: Reclocked: 4.0 ns, Bypassed: 3.75 ns
HD: Reclocked: 4.1 ns, Bypassed: 3.7 ns
SD: Reclocked: 6.2 ns, Bypassed: 4.25 ns
CH3: Input F2 to Output F1 (Transceiver option):
3G: Reclocked: 6.0 ns, Bypassed: 5.7 ns
HD: Reclocked: 6.0 ns, Bypassed: 5.7 ns
SD: Reclocked: 11.25 ns, Bypassed: 9.25 ns
Reclocking: Active/bypass
Input format selection: Auto/manual
Control and Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex
frame but not in other 8900 series frames
including Gecko-A or Gecko-V frames.
8943RDA-DFR
SD/HD/3G-SDI reclocking distribution amplifier, front
and rear module set
Fiber Optic SFP Options: Order one option kit
(fiber optic submodule, mounting bracket and cable
assembly) per front module depending on your
application for signals up to 3 Gb/s.
Dual Receiver (1270 nm >1610 nm):
SFP-13103G-M1DRX-K
Dual Transmitter, 1310 nm and 1310 nm:
SFP-13103G-M1DTX-K
Fiber Transceiver, 1310 nm and 1310 nm:
SFP-13103G-M1TRX-K
CWDM Dual Transmitter, 1470 nm and 1490 nm:
SFP-CWDM3G-1-K
CWDM Dual Transmitter, 1510 nm and 1530 nm:
SFP-CWDM3G-2-K
CWDM Dual Transmitter, 1550 nm and 1570 nm:
SFP-CWDM3G-3-K
CWDM Dual Transmitter, 1590 nm and 1610 nm:
SFP-CWDM3G-4-K
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
Key Features
Supports SD/HD/3G-SDI rates up to 1080p•
Auto or manual input format selection•
Fiber-ready for fiber optic submodule•
option for receiving or distributing over
single-mode fiber
Two dedicated electrical inputs•
Seven reclocked electrical outputs•
(in four output pairs: 3x2 and 1x1)
Configurable input to output mapping•
100% DVB ASI compliant•
High connectivity input/output density•
with multiple configurations
Remote control and monitoring via•
Ethernet frame interface
Input to output mapping: all availalbe•
inputs can be active at the same time
and are configurable to any output pair or
available optional fiber optic output (one
input per electrical output pair or fiber
optic output). Availability of fiber optic
inputs and outputs depends on the type of
option fiber optic submodule installed
Applications
Distributing HD/3G signals or mixed HD/3G•
and SD format installations
Installations where an SD to HD/3G update•
is planned
Combining HD/3G, SD, or ASI distribution•
with a long-distance isolated fiber
connection
The 8943RDA-DFR is a fiber-ready SD/
HD/3G-SDI reclocking DA with two dedicated
electrical inputs and seven reclocked electrical
outputs (in four output pairs). An optional fiber
optic submodule can be installed to provide
additional fiber optic inputs and outputs.
The module can equalize up to 90 meters
for input 1 (J10) and 100 meters for input 2
(J8) of Belden 1694A cable for HD/3G-SDI.
It can distribute either HD/3G-SDI or SD-SDI,
making it ideal for mixed format applications
or installations where an upgrade to HD/3G
is planned. It is also completely DVB ASI
compliant.
With its fiber-ready architecture, the
8943RDA-DFR can be configured as a fiber
receiver, providing two fiber optic inputs that
can be mapped to feed seven electrical outputs
(in output pairs). The two fiber optic inputs are
both active along with the dedicated electrical
inputs. This makes the module ideal where
redundant feeds are used.
Using the dual transmitter fiber option, this
module can distribute two additional fiber
outputs as well as the seven electrical outputs
(in output pairs) allowing it to feed both local
and remote locations simultaneously. This can
also provide redundant fiber feeds.
With the transceiver option, the 8943RDA-
DFR makes a flexible DA ready for either fiber
in or fiber out applications. The fiber option
makes it ideal for receiving signals from distant
downlinks or transmitting to remote uplinks.
Refer to the configuration block diagrams on
the next page for illustrations of the mulitple
uses for the 8943RDA-DFR with the available
fiber optic submodule options. Note that all
module inputs and outputs can be active at the
same time and input to output mapping can be
set as desired in configuration.
All parameters can be configured directly
from the card edge or via a standard HTML
Web browser when the 8900NET (Net Card)
Network Interface module has been installed.
The module operation and configuration, as
well as the signal presence and format can
be monitored using industry standard SNMP
protocol via the 8900NET (Net Card) module.
32 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier

33
8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier
8943RDA-DFR (without Fiber Optic option)
Active Inputs Available Outputs
BNC J10 BNC pairs: J1/J2, J3/J4, J5/J6, J7
BNC J8
8943RDA-DFR (with Dual Receiver Fiber Optic option)
Active Inputs Available Outputs
BNC J10
BNC pairs: J1/J2, J3/J4, J5/J6, J7
BNC J8
Fiber 1 In
Fiber 2 In
8943RDA-DFR (with Dual Transmitter Fiber Optic option)
8943RDA-DFR (with Transceiver Fiber Optic option)
BNC J10
Input
BNC J8
Input
Equalizer
Reclock Bypass
Reclocker
Fiber 1
Output
Equalizer
Reclock Bypass
Reclocker Input to
Output
Mapping
Fiber 2
Output
Dual
Transmitter
Option
Fiber TX
Fiber TX
J1
J2
J3
J4
J5
J6
J7
BNC J10
Input
BNC J8
Input
Equalizer
Reclock Bypass
Reclocker
Fiber 1
Input
Equalizer
Reclock Bypass
Reclocker
Fiber 2
Output
Reclock Bypass
Reclocker
Input to
Output
Mapping
Transceiver Option
Fiber RX Fiber TX
J1
J2
J3
J4
J5
J6
J7
Active Inputs Available Outputs
BNC J10 BNC pairs: J1/J2, J3/J4, J5/J6, J7,
Fiber 1 Out, Fiber 2 Out
BNC J8
Active Inputs Available Outputs
BNC J10 BNC pairs: J1/J2, J3/J4, J5/J6, J7,
Fiber 2 Ouptut
BNC J8
Fiber 1 Input
BNC J10
Input
BNC J8
Input
Reclock Bypass
Reclocker
Fiber 1
Input
Reclock Bypass
Reclocker
Equalizer
Equalizer
Reclock Bypass
Reclocker
Input to
Output
Mapping
Fiber 2
Input
Reclock Bypass
Reclocker
Dual
Receiver
Option
Fiber RX
Fiber RX
J1
J2
J3
J4
J5
J6
J7
J10
Input
J8
Input
Equalizer
Reclock Bypass
Reclocker
Equalizer
Reclock Bypass
Reclocker
Input to
Output
Mapping
J1
J2
J3
J4
J5
J6
J7