GRASS VALLEY 8947RDA-FR - User manual

Specifications Ordering Information
38
8900WFR-R
J1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
SD/HD
SDI Out
SD/HD
SDI Out
SD/HD
SDI Out
SD/HD
SDI Out
SD/HD
SDI In
SD/HD
SDI Out
SD/HD
SDI Out
SD/HD
SDI Out
SD/HD
SDI Out
Fiber I/O
Connector
8X
SD/HD
SDI
Out
SD/HD
SDI In Equalizer
Equalizer bypass
Reclocker
Reclock bypass
Up to one fiber
option may be
selected
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TX
Fiber TX
SD/HD
Optical In
SD/HD
Optical Out
OptionOption
Option
Format
Detector
Key Features
Eight-output SD-SDI or HD-SDI reclocking•
distribution amplifier
Fiber-ready architecture supports up to•
two optional connections
— 100% DVB ASI compliant
— High connectivity density: eight coaxial
outputs and fiber option
Remote control and monitoring via•
Ethernet frame interface
Applications
Distributing HD signals or SD/HD in•
rate-agile installations
Installations that will upgrade to HD•
Combining SD, HD, or ASI distribution with•
long-distance, isolating fiber connection
As a fiber receiver or transmitter in single-•
channel-per-module applications
The 8947RDA-FR is a dual SD/HD reclocking
distribution amplifier, with automatic format
detection. It provides eight reclocked outputs
and can equalize up to 125 meters of Belden
1694A cable for HD-SDI. It can be used to
distribute either SD-SDI or HD-SDI signals,
making it ideal for mixed-format applications or
installations where an upgrade is planned.
Supporting up to two fiber connections, this
module is ready for either fiber-in or fiber-out
applications. It can also distribute eight non-
inverted DVB ASI outputs, making it ideal for
receiving signals from distant downlinks or
transmitting to remote uplinks.
8947RDA-FR Fiber-Ready SD/HD Reclocking DA
Supported Frame Types
GeckoFlex frame
Power Rating
4.1 Watts – single slot
Inputs
SD/HD-SDI:
•Inputequalization:upto125mHD-SDI,
up to 330m SD-SDI (Belden1694A)
•Returnloss:>15dB0.004to1.5GHz
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50,
720p @ 59.94, 50, 480i @ 59.94 (NTSC)
576i @ 50 (PAL-B)
DVB ASI: Yes
Outputs
SD/HD-SDI: Eight outputs
•Returnloss:>15dB,5to270MHz;
>10 dB to 1.5 GHz
•Signallevel:SDI800mVp-p±10%
•Outputjitter:forinputwith<0.1UIjitter,theoutput
jitter complies with the SMPTE 259M & 292M
standards
Optical: Single-mode (optional)
DVB ASI: Eight non-inverted outputs
Performance
Electrical length: <10 ns (reclocking enabled)
<5 ns (reclocking bypassed)
Distribution
Equalizing: Active/bypass
Reclocking: Active/bypass
Manual input selection: Coax In, fiber 1, fiber 2
(with optional fiber input option)
Input format selection: Automatic/manual
Control and Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex
frame but not in other 8900 series frames
including Gecko-A or Gecko-V frames.
8947RDA-FR
SD/HD re-clocking distribution amplifier – fiber ready
(front and rear module set)
SFP-13103G-M1DRX
Dual input fiber receiver. Suits one-signal-per-fiber and
CWDM fiber systems
SFP-13103G-M1DTX
Dual output fiber transmitter. For one-signal-per-fiber
systems
SFP-13103G-M1TRX
Fiber transceiver. For one-signal-per-fiber systems
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular