Great Little Trading Fix It Work Bench User manual

1
Fix It Work Bench
20/04/2016
V1
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• Adult assembly required.
• Not suitable for children under 3 years due to small parts that may
present a choking hazard.
• Assemble and use on a at and level surface.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage which may make the
product unsafe.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A
#1
28x Screws
22mmL
STEP 1:
Please ensure legs are positioned correctly
as shown. All lower drill holes must
face inward.
STEP 2:
Insert tray component (Y) and secure
in place from the inside using 4 x
screws (#1).
Hardware for Step 1:
12x #1 22mmL screws
Hardware for Step 2:
4x #1 22mmL screws
You will need (not supplied)
Phillips Head Screwdriver
B C
D E
Y
F
G H
I
JO
KP
LQ
M R
N
T
U
V
W
S X
B
A
A
B
DC
E
Y
2x 2x
1x
1x
1x
1x
1x
2x
1x
1x
1x
2x
1x
1x
2x
2x
1x
2x
4x
6x
4x
4x
1x
1x 1x Lower drill holes
Lower drill holes

4
STEP 3:
Attach worktop (F) using 4 x screws
(#1).When attaching the worktop,
ensure the front edge aligns
with the silver panel (C).
STEP 4:
Insert peg panel (H) between 2 x
uprights (G).Attach saw panel (I) to
uprights using 4 x screws (#1).
Hardware for Step 3:
4x #1 22mmL screws
Hardware for Step 4:
4x #1 22mmL screws
Hardware for Step 5:
4x #1 22mmL screws
F
I
G
G
H
O
L
N
STEP 5:
Attach assembled top section
to assembled lower section
using 4 x screws (#1).
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
C