Green image GC-2102-4P Datasheet

Easy DMX 512 Decoder
GC-2102-4P
Type:
Project:
Catalog#:
Main Features
Specification Features
Product Size
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and fin
ish in any way that will not alter installed appearance or reduce function and performance.
y.
Four-channel output selectable.
Two types available (Constant Voltage, Constant Current), suitable
for different LED lamps.
To work with power repeater to expand output power unlimitedly.
R R R-2812, SR-2816
and any good qualit
Input Voltage
Current
Model
Output
Remarks
GC-2102-4P
12-36V DC
4x5A
4x(60-180)W
Constant Voltage
Safety & Warnings
The product must be installed and serviced by qualified personnel.
IP20. Avoid direct sunlight and rain. When installed outdoors, please ensure it is mounted in a waterproof enclosure.
Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Please check that output voltage(s) of any LED power supplies used complies with the working voltage of the product.
Never connect any cables while power is on and always ensure correct connections to avoid short circuits before turning on.
Please ensure that the cable is secured tightly in the connector.
For update information please consult your supplier.
1
2
3
4
5
6
7
37 mm
85 mm
95 mm
20 mm
59 mm
170 mm
29 mm

Using Instruction
Set DMX address
Press 1st button for 2 seconds, digital display flashes to set the required
DMX address, then press any button for >2 seconds to confirm.
Choose PWM frequency
Press and hold 1st and 3rd button for 2 secs, digital display will flash to
show P_c. P means PWM frequency. To change, press the 1st button. If
display reads "1", it is at 1500Hz, "2" is at 200Hz. C means dimming
options. To change, press the 3rd button. If display reads "1", it is using
logarithmic dimming, "2" uses linear dimming.
The preset default is PWM frequency 200Hz with linear dimming (2_2).
Operation of switching 3 or 4 channels
Use the following buttons to set desired DMX512 address: “1” sets
“hundredths” position, “2” sets “tenths” position, “3” sets “ones”.
Ensure a stable connection for the DMX512 controller to work properly.
Choose Channel
Press 2nd and 3rd button at the same time for 2 seconds, digital display
will flash cH, then press 1st button to choose 1/2/3/4, each corresponds
to how many desired channels (3 creates 3 channels, and so on). Press
and hold any button for >2 seconds to confirm 1,2,3 or 4 channels.
The factory preset default is 4 channel outputs.
“3” button
“2” button
“1” button
Easy DMX 512 Decoder
GC-2102-4P
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and fin
ish in any way that will not alter installed appearance or reduce function and performance.
Wiring Diagram

Easy DMX 512 Decoder
GC-2102-4P
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and fin
ish in any way that will not alter installed appearance or reduce function and performance.
Warranty Agreement
1
2
3
We provide lifelong technical assistance with this product:
-year warranty. Every product has a date printed for warranty expiration (ie. 1125 means year 2011, week 25).
The warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for labour and parts.
Limited Warranty
ny defects caused by incorrect or inappropriate operation.
ny damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
ny damages due to transportation, vibration etc. after purchase.
ny damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
ny damages caused by negligence, including storing in high temperatures, humidity or proximity to harmful chemicals.
Repair or replacement as provided under this warranty is the exclusive remedy to the customer.