Green image GC-2102-DMX2 Datasheet

Easy DMX512 Decoder
GC-2102-DMX2
Type:
Project:
Catalog#:
Main Features
Specification Features
Product Size
Input Voltage Output Power
Output Current
Model
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.
GC-2102DMX2
12-36V DC
4x8A Remarks
4x(96-288)W
Constant Voltage
• Standard DMX512 compliant control interface, enable to set the
DMX address freely and show address via digital numeric display
• Three-channel / four-channel output selectable
• Two types available (Constant Voltage, Constant Current), suitable
for different LED lamps
• To work with power repeater to expand output power infinitely
170 mm
59 mm
29 mm
Safety & Warnings
The product must be installed and serviced by qualified personnel.
IP20. Avoid direct sunlight and rain. When installed outdoors, please ensure it is mounted in a waterproof enclosure.
Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Please check that output voltage(s) of any LED power supplies used complies with the working voltage of the product.
Never connect any cables while power is on and always ensure correct connections to avoid short circuits before turning on.
Please ensure that the cable is secured tightly in the connector.
For update information please consult your supplier.
1
2
3
4
5
6
7

Wiring Diagrams
Operation
Use the following buttons to set desired DMX512 address:
“1” sets “hundredths” position, “2” sets “tenths” position, “3” sets “ones”.
Ensure a stable connection for the DMX512 controller to work properly.
“3” button
“2” button
“1” button
Using Instruction
Easy DMX512 Decoder
GC-2102-DMX2
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.

Using Instruction
Choosing Channel(s)
Press 2nd and 3rd button at the same time for 2 seconds, digital display will
flash cH, then press 1st button to choose 1/2/3/4, each corresponds to how
many desired channels (3 creates 3 channels, and so on). Press and hold any
button for >2 seconds to confirm 1,2,3 or 4 channels. The factory preset
default is 4 channel outputs.
NOTE: For example, to set address as 001. When selecting 1cH, all four
channels will be the same address (001). When selecting 2cH, channel one
and three will be the same address (001), channel two and four will be (002).
When selecting 3cH, channel 1,2,3 will be address (001,002,003), while
channel 4 address is also (001). When select 4cH, channel 1, 2, 3, 4 will be
address (001, 002, 003, 004).
Set DMX address
Press 1st button for 2 seconds, digital display flashes to set the required
DMX address, then press any button for >2 seconds to confirm.
Choose PWM frequency
Press and hold 1st and 3rd button for 2 secs, digital display will flash to show
P-c. P means PWM frequency. To change, press the 1st button. If display reads
"1", it is at 1500Hz, "2" is at 200Hz. C means dimming options. To change,
press the 3rd button. If display reads "1", it is using logarithmic dimming,
"2" uses linear dimming.
The factory preset default is PWM frequency 200Hz with linear dimming (2_2).
Warranty Agreement
Easy DMX 512 Decoder
GC-2102-DMX2
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.
1
2
3
We provide lifelong technical assistance with this product:
• 5-year warranty. Every product has a date printed for warranty expiration (ie. 1125 means year 2011, week 25).
The warranty is for free repair or replacement and covers manufacturing faults only.
• For faults beyond the 5-year warranty, we reserve the right to charge for labour and parts.
Limited Warranty
• Any defects caused by incorrect or inappropriate operation.
• Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
• Any damages due to transportation, vibration etc. after purchase.
• Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
• Any damages caused by negligence, including storing in high temperatures, humidity or proximity to harmful chemicals.
• Product has been updated.
Repair or replacement as provided under this warranty is the exclusive remedy to the customer.