Greenheck ERVe-20 Instruction manual

®
Roof Curb and Duct Adaptor Assembly 1
®
Document 472119
Roof Curb and Duct Adapter Assembly
Model ERVe
Assembly and Installation Instructions
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property damage! Upon
receiving the product, check for any damage that may have occurred during transit and report it immediately
to the shipper. Also verify that all accessory items are accounted for.
STEP 1: Unpack and Inspect Parts
ERVe
Part Description Quantity ERVe-20 ERVe-35 ERVe-45 ERVe-55
Part # Part # Part # Part #
Roof Curb Kit
1. 14-inch 1 898453 898456 898459 898462
2. 18-inch 1 898454 898457 898460 898463
3. 24-inch 1 898455 898458 898461 898464
End Channel
1. 14-inch 2 753874 753888 753940 753954
2. 18-inch 2 753884 753900 753949 753960
3. 24-inch 2 753886 753901 753951 753962
Side Channel
1. 14-inch 2 753875 753889 753941 753955
2. 18-inch 2 753885 753901 753950 753961
3. 24-inch 2 753887 753937 753952 753963
Center Channel 1 753876 753890 753942 753956
End Support 1 753877 753891 753943 753957
Insulation Pan 2 753878 753892 753944 753958
Duct Adaptor 1 753879 753893 753945 753959
Hardware Kit 1 852902 852902 852902 852902
Screws, SMS (A) 12 x 0.625 (IHH) 36 415180 415180 415180 415180

472119 • Roof Curb and Duct Adapter Assembly, Rev. 3, November 2019 Copyright 2019 © Greenheck Fan Corporation2
ERVe Hardware Required:
(24) Screws, SMS (A) 12 x 0.625 (IHH)
(2) End Channels
(1) Center Channel
(2) Side Channels
(1) End Support
STEP 2: Assemble Main Curb for Model ERVe
Instructions: • See ERVe Main Curb Assembly for positioning of the correct hardware.
• Align the holes and fasten as shown below.
Overall Curb Dimensions for Model ERVe
ERVe-20 ERVe-35 ERVe-45 ERVe-55
W40.353 48.478 55.478 65.416
L61.103 63.353 67.353 78.228
All dimensions shown are in inches.
L
W
End Channel
End Channel
End
Support
Center
Channel
Side Channels
SPECIAL TOOLS REQUIRED
• Cordless drill
• 5/16 in. Nut setter
• Awl — for hole alignment
ERVe Hardware Required:
(4) Screws, SMS (A) 12 x 0.625 (IHH)
(2) Insulation Pans
(1) Duct Adaptor
NOTE
All curbs shipped for ERVe units will include a duct
adaptor regardless of ducting arrangement.
STEP 3: Final Roof Curb Assembly for Model ERVe
Insulation Pan
Insulation Pan
Duct
Adaptor
®
Phone: [phone] • Fax: [phone] • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com