Greenheck SP User manual

Centrifugal Ceiling and Cabinet
Exhaust Fans
Models SP and CSP
September
2012
See ENERGY STAR® Models on Pages 16-17

2
Models SP and CSP are listed electric fans
(UL/cUL 507). Ceiling Exhaust Fans are also
UL Listed for above bathtub/shower with GFCI
branch protected circuit. File no. E33599.
Greenheck Fan Corporation certifies that the SP
models shown herein are licensed to bear the
AMCA seal. The ratings shown are based on tests
and procedures performed in accordance with
AMCA Publication 211 and AMCA Publication 311
and comply with the requirements of the AMCA
Certified Ratings Program. The SP models are not
AMCA certified with 50 hertz motors.
Greenheck Fan Corporation certifies that the
CSP models shown herein are licensed to bear
the AMCA seal. The ratings shown are based on
tests and procedures performed in accordance
with AMCA Publication 211 and comply with
the requirements of the AMCA Certified Ratings
Program. The CSP models are not AMCA certified
with 50 hertz motors.
Models SP and CSP
Ceiling and Cabinet Exhaust Fans
Standard Construction Features ..........4-5
Options and Accessories ................. 6
SP Grill and Lighting Options.............. 7
Control Accessories ....................8-9
Filter and Discharge Accessories.......... 10
Flat Roof Caps ........................ 11
Wall Discharge Accessories ............12-13
Sound Level Information ................ 14
Energy Star Approval ................... 15
Model Number Code ................... 15
Model SP-A .......................... 16
Model SP-B and SP-C.................. 17
Model CSP-A ......................... 18
Model CSP-B ......................... 19
Model SP (50 cycle) .................... 20
Model CSP (50 cycle)................... 21
Typical Specifications.................22-23
Warranty ............................. 24
Fans that are ENERGY STAR qualified include:
SP-A-50, 70, 90, 200, 250, 290 and 410
SP-B-50, 70, 80 and 90
Products that earn the ENERGY STAR®
prevent greenhouse gas emissions
by meeting strict energy efficiency
guidelines set by the U.S. Environmental
Protection Agency and the U.S.
Department of Energy.

3
Models SP and CSP
Ceiling and Cabinet Exhaust Fans
Model Description Profile
min. height
Sound
min. sones Air Volume
(maximum) UL Listing
Ceiling Fans
SP-A Premium Ceiling Fan:
Best choice to meet sound requirements.
9 inches
(229 mm) 0.5 1,600 cfm (2718 m3/hr)
UL/cUL Listed for above bathtub/shower
with GFCI branch protected circuit
(Sizes A390 and smaller)
SP-B
Deluxe Ceiling Fan:
Compact to fit most applications with quiet
operation.
7 inches
(178 mm) 1.2 200 cfm (340 m3/hr)
UL/cUL Listed for above bathtub/shower
with GFCI branch protected circuit
SP-C Economy Ceiling Fan:
Designed for light commercial applications.
35⁄8inches
(86 mm) 3.0 50 cfm (85 m3/hr) UL Listed
Inline Fans
CSP-A
Premium Inline Fan:
Outperforms the competition and is
preferred by specifying engineers.
9 inches
(229 mm) 0.8 3,775 cfm (6414 m3/hr) UL/cUL Listed
CSP-B
Deluxe Inline Fan:
Compact design to fit in small remote
spaces.
7 inches
(178 mm) 1.5 185 cfm (314 m3/hr)UL/cUL Listed
Great things come in small packages, as do our
ceiling fan SP models and cabinet fan CSP models.
Be assured when you buy any Greenheck product,
you are getting a quality product at a competitive
price. In fact, we guarantee our SP and CSP ceiling
and cabinet exhaust fans with a three-year warranty.
We offer the most comprehensive ceiling and cabinet
exhaust fan line in the commercial market. We are
your market leader!
SP fans are designed for
ceiling mounted applications.
CSP fans are
designed for inline
mounted applications.
Model Comparison
Model
Location Mounting Airflow Application Drive
Type
Impeller
Type Performance
Relative Cost Outdoor Indoor Roof Curb Base/Floor Hanging Wall Ceiling Mounted Exhaust Supply Reversible Recirculate General/Clean Air Contaminated Air Spark Resistant Grease (UL 762) Smoke Control (UL) High Wind (150 mph) High Temp (above 200°F) Belt Direct Centrifugal Propeller/Axial Mixed Flow Maximum Volume (cfm) Maximum Static Pressure (in. wg)
SP 9999 99 1,600 1 $
CSP 99999 993,800 1 $
Benefits
•Lowest sound in the industry
•Compact size
•Five different fan styles offering you a
competitive price
•Broadest performance selections in the industry
d
for
li
cat
i
ons
.

4
Standard Construction Features
3
4
5
6
7
1
2
8
10
11
12
9
1
2
3
4
78
9
10
11
12
Model SP-A
Model SP-C
Model SP-B
Model CSP-A
Model CSP-B
1
2
3
4
65
7
8
10
11
12
13
1
2
3
47
810
11
12
13
9
1
2
3
7
10
11
12

5
Standard Construction Features
Number and Description Specific Features for Each Model
SP-A SP-B SP-C CSP-A CSP-B
1Backdraft
Damper
Durable plastic to eliminate rattling & backdrafts 99 9
Aluminium to eliminate rattling & backdrafts 99
2Outlet
Round - For quick and easy connections 50-90 50-200 50 50-200
Square - For quick and easy connections 110-1550 110-3600
3Power
Assembly
Removes quickly for maintenance 99999
Includes conversion from horizontal to
vertical discharge 99
4Electrical
Access
Vertical electrical access to eliminate
drilling holes 99 99
External electrical access to eliminate removing
motor pack, saving installation time 99
5Electrical
Knockouts
Eliminates drilling holes
(horizontal or vertical) 99999
6Acoustic
Insulation Absorbs sound 99
7Disconnect Servicing is quick and safe 99999
8Electrical
Junction Box Large for easy wiring 99 99
9Grille Concealed attachment screws securely fasten
grille to housing for quiet, rattle free operation 999
10 Mounting
Brackets Adjustable for multiple installation conditions 99999
11 Housing
Embossed galvanized steel for rigidity 99999
A low profile for height restricted areas 99 9
12 Motors
Motors are compatible for use with speed
controls and have thermal overload protection
Domestic & International
• 50 cycle, 220v or 240v
• 60 cycle, 115v, 208v, 220v, 230v, & 277v options
(See CAPS for availability)
99
60 cycle,
115v only 99
13 Access Panel Gain easy access to internal components once
installed 99999
Exclusive
Electrical
Wiring Feature
Electrical access cover located on the housing exterior. This feature permits external wiring without removing
the power assembly, saving installation time and cost. Available on models SP-A and CSP-A.
Double-Wide
Fans
Available for applications requiring 700 cfm or greater.
Double-wide fans have two double-width forward-curved wheels,
which are housed in separate scrolls, and driven by a single motor.
Available on models SP-A and CSP-A.
Vertical
Discharge
Exhaust outlet duct installed in the optional vertical position.
The power assembly must be rotated to match the duct adapter position.
Available on models SP-A and CSP-A.

6
Options and Accessories
Ceiling Radiation Damper
The National Fire Protection Association (NFPA)
Standard 90A requires openings in fire rated ceiling
assemblies to be protected by appropriately rated
ceiling radiation dampers. As a result, many local
codes require fans installed in fire rated ceilings to
be protected by dampers which are insulated against
both heat and flame.
UL Classified ceiling radiation dampers are rated at
three to four hours of fire resistance. All model SP
fans and fan/light combinations are available with
ceiling radiation dampers. This design saves space
by allowing the damper to mount directly beneath
the fan.
Model SP-A
Model SP-B
SP-B Fan
Hanging
Vibration
Isolation
Ceiling
Radiation
Damper
Fire
Rated
Ceiling
Grille
3 in.
AxB
Polypropylene
Steel
Aluminum
SP Model CRD Length (A) Width (B) Height
A50 - A190 310 131⁄2
(343)
111⁄8
(283)
3
(76)
B50 - B200
A200 - A390 320 143⁄8
(365)
121⁄4
(311)
3
(76)
A410 - A510
A710 - A780 350 187⁄16
(468)
1415⁄16
(379)
3
(76)
A700 700 243⁄16
(614)
121⁄4
(311)
3
(76)
A900 - A1550 360 243⁄16
(614)
1415⁄16
(379)
3
(76)
All dimensions shown in inches (millimeters). Add an “L” to all CRD models if
fan & light combo is used. *CRD is approximately 1/4 inch (6 mm) larger than
housing dimension. (See Installation, Operation and Maintenance Manual)
Contractor 4 Packs
Save installation time and labor by installing the
housing first, then installing the internal components
after the sheetrocking, plastering and finishing is
done. Housings are packaged in one box, power
assemblies and grilles are packaged in another box.
Components are shipped to coincide with the phase
of your project. (Model SP-B only).
Wheel Options
Greenheck’s ceiling and cabinet fans (models SP and
CSP) deliver high performance from a forward-curved
wheel. The forward-curved wheel design offers
both high-efficiency and low sound. Fan wheels are
constructed of polypropylene or steel as standard,
and all models offer an aluminum wheel option.
•Level A models utilize steel or polypropylene wheel
construction depending on size.
•Level B models are standard with a
polypropylene wheel.
SP-A Fan
Hanging
Vibration
Isolation
Ceiling
Radiation
Damper
Fire
Rated
Ceiling
Grille
AxB
3 in.

7
SP Grille and Lighting Options
Grille Options
Designer - standard grille
Available in white polystyrene finish,
with or without motion detector
or time delay (see page 9 for
motion detector and time
delay information). Standard
on SP models A50-A390 and
B50-B200.
Grille - Aluminum
White enamel finish standard for
models A410-A1550.
Optional for models A50-A390 and
B50-B200.
Grille - Decorative
White plastic finish, with or without
light, motion detector or time delay
(see page 9 for motion detector
and time delay information).
Optional for models A50-A390
and B50-B200.
Greenheck’s fan and light combinations include either
a prismatic or a frosted lens and either compact
fluorescent or incandescent lamps. Our unique light
box is manufactured with a reflective material to
increase the light given off by either type of lamp.
UL Listed for above bathtub and showers with GFCI
branch protected circuit.
Model SP-A, sizes 50 - 390
Model SP-B, sizes 50 - 200
Lighted Grille Options
Compact Fluorescent Lamps (CFL)
Features and Benefits
• GU24 Base
• Long Life, 10,000 hour average
rated life
• Lower maintenance and labor
costs for lamp replacements
• No lead glass - Better lumen
maintenance over life of bulb
• End-of-Life logic guards against violent failures
• Complies with UL 1993 End-of-Life requirements
• World Class phosphor insures high lumen output
and excellent lumen maintenance
• Replacement bulbs can be found wherever
standard light bulbs and fixtures are sold. Energy
efficient ENERGY STAR®qualified fixtures.
• California Energy Title 24 compliant
Grille - Stainless Steel
Polished stainless steel finish
optional for models A50-A390
and B50-B200.
Customized grille options
Molded polystyrene available in an array of colors.
Includes all the same accessory options as the
standard grilles. For more information on the many
ways this grille option can be used please contact
your Greenheck representative.
Customized
Grille Lens
Lenses can be
customized with
formed shapes or logos.
Contact your Greenheck representative for details.
Prismatic Lens
The prismatic lens design provides
approximately 25% more light than
a traditional frosted lens. The lens
may be easily removed to replace
light bulbs.
Frosted Lens
The frosted lens option is a traditional
design which lets approximately 80%
of light through the lens. The lens
may be easily removed to replace
light bulbs.
Incandescent Lamps
One bulb provides up to 100 watts
of light (bulbs provided by others).
• Dimmable
• Reflective light box

8
Control Accessories
Speed Controls
Speed controls may be used
on model SP and CSP fans for
manual adjustment of the fan’s
performance (for final system
balancing) or to control the
fan’s output in confined
spaces, such as conference or
meeting rooms.
The fan can be adjusted to 60% of
design airflow with a speed control.
This reduction in airflow and fan
speed is also accompanied by a
reduction in noise level. Solid state
speed controls are available for
a range of applications up to 15
amps. Speed controls can be used to operate
more than one fan if the combined total amperage
of the fans do not exceed the control rating.
For use with shaded pole and permanent split capacitor (PSC)
motors. Available shipped loose or mounted internal or external.
Switches
Switches may be used on model
SP and CSP fans to enable manual
control of your fan or fan and light
combination. There are several
options to fit your application.
NEMA 1 - Single pole rocker
switch assembly.
• Rated for, 115v, 15 Amp, 1/2 hp
• UL Listed
Model MS-16 - Single pole rocker switch assembly
with cover and pilot light.
• Rated for, 115v, 15 Amp, 1/2 hp
• UL Listed
NEMA 1 - Two pole rocker switch assembly.
• Rated for, 220/230/240/277v, 20 Amp, 2 hp
• UL Listed
• Requires a 2x4 handy box.
Internal Mounting
FULL VOLTAGE
120 VAC
N
HBLACK
SPEED CONTROL
WHITE
VARIABLE
VOLTAGE
FAN
AUX
DEVICE
SWITCHED FULL VOLTAGE
Dotted line indicates
for use with 10W
switch only.
RED
EXTERNAL JUMPER
LOAD
LOAD
SPEED CONTROL INTERNAL AND/OR EXTERNAL MOUNTING OPTIONS
Model
Voltage Rating
Amp Rating
Fan Sizes
50 70 80 90 110 125 150 190 200 250 290 390 410 510 700 710 780 900 1050 1410 1550 1750 2150 3600
5WSSC
115 - 127v
5 Amp
I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E No No No No No No
10WSSC
115 - 127v
10 Amp
EEEEEEEEEEEEEEEEEE EEEEE
No
15WSSC
115 - 127v
15 Amp
EEEEEEEEEEEEEEEEEE EEEEE
No
5W240
220 - 240v
5 Amp
No No No *I/E I/E No I/E I/E *I/E No I/E I/E No I/E No No I/E No I/E No I/E No No No
8WSSC
220 - 240v
8 Amp
No No No *E E No E E *E No E E No E No No E No E No E No No No
5W277
227v
5 Amp
No No No No I/E I/E I/E I/E *I/E No No No No No No No No No No No No No No No
KEY: E = External mounted only I/E = Available Internal and External Mounted
* Only available on the B-series (A-series is not available) No = Not available
NOTES: Speed controllers are not available for 208v applications. SP-C50 Speed Controller is shipped loose only. All speed controller options listed in table are UL Listed.
Handy Box sizes are 2x4 for all options above except 10WSSC and 15WSSC, which are 4x4.

9
Time Delay Switch
Time delay switches save energy by automatically
turning off equipment. They may be used with SP and
CSP fans or fan and light combinations for extended
operating time of fan. Time delay switches act in the
same manner as a standard switch, however, there is a
delay of 1 to 60 minutes after it has been turned off.
Model GTD -
A single switch controls both fan
and light. Available shipped loose.
• Silent Operation
• Rated for 115v
• UL Listed
• Requires 2x4 handy box
Transformers
Transformers are available for
applications requiring voltage
reduction. Selection is based on
motor amperage. All transformers
are shipped loose.
Motion Detectors
Motion detectors may be used with
SP and CSP fans or fan and light
combinations. Motion detectors
use a passive infrared motion
detector to automatically turn the
fan on when a change in motion
is sensed. They have
a viewing area of 180
degrees, however they
must be placed in the
line-of-sight. They also
have an adjustable time
delay shutoff setting of
1 to 20 minutes.
Grille Motion Detectors are available on models
up through size SP-A390 and SP-B200.
• Rated for 115v
• UL Listed
Model MDW
For use on fan or lights. Available shipped loose.
• Rated for 115v
• UL Listed
• Requires 2x4 handy box
Control Accessories
Grille Mount
Wall Mount
Gnd.
Hot
Black
Green
Red
Load
(12.5 Amps Max.)
Neutral
Black
Red
Black
White
White Hot
Neutral
Ground
Motion Sensor
Fan Motor and/or
Light Green
115 VOLT AC
60 CYCLE
(NEUTRAL)
(HOT) BLACK BLUE
(500 Watt Max)
LIGHT
(7.5 Amps Max)
FAN MOTOR
RED
WHITE
Models Voltage Ratings Amp Ratings
T-2.0 230/277v to 115 2.0 Amps
T-4.3 230/277v to 115 4.3 Amps
T-6.5 230/277v to 115 6.5 Amps
T-8.6 230/277v to 115 8.6 Amps








 




10
Filters and Discharge Accessories
Filters
Fans used in most applications will collect airborne
dirt on wheels and motors over time, even where air
is not excessively dirty. Accumulations of dirt on the
fan wheel will sharply reduce performance and cause
imbalance. Dirt buildup on the motor can cause it to
overheat. All of these conditions will shorten the life of
the fan. To help reduce this accumulation, washable
aluminum mesh filters are available to trap dirt before
it enters the fan. These filters should be regularly
cleaned to maintain performance. The Filter Loss Chart
shows the effect the filter will have on performance.
To determine the added resistance, divide the desired
cfm by the filter area (ft2). This will give ft/min. Use this
with the filter loss chart to get the added resistance.
Filters reduce sound levels, in addition to reducing dirt
accumulations on the motor and wheel.
Roof Discharge Accessories
Model RJ - Pitched Roof Cap
• Steel construction with black enamel finish
• Integral flashing flange
• Built-in birdscreen and damper
Model EL-10x3 -
Elbow Discharge with Grille
• Designed for installation under roof eaves
• Black epoxy finish (elbow and grille)
• Built-in damper
• For model SP and
CSP sizes 50-290
Mesh
Filter
SP
Grille
Filter Loss Chart
SP Model
Filter Model Filter
Area (ft2)
Designer
Grille *Metal
Grille
SP-A50 - A190 F-200 F-210 0.739
SP-B50 - B200, A200 - A390 F-200 F-220 0.911
SP-A410 - A510
SP-A710 - A780 NA F-250 1.518
SP-A900 - A155 NA F-260 2.078
*Aluminium or Stainless Steel Grille.
0 1 2 3 4 5 6 7 8 9
Velocity (FPM) x 100
.24
.22
.20
.18
.16
.14
.12
.10
.08
.06
.04
.02
.00
Resistance in w.c.
Model Use for sizes: A B C D E Throat
RJ-4 C50, B50-B80 11
(279)
91⁄4
(235)
81⁄4
(210)
55⁄16
(135)
41⁄2
(114)
4 (102)
diameter
RJ-6x9 B90-B200,
A50-A390
183⁄4
(476)
141⁄4
(362)
141⁄2
(368)
103⁄8
(264)
61⁄2
(165)
6 x 9
(152 x 229)
RJ-10x10 A410-A1050 181⁄2
(470)
271⁄2
(699)
153⁄4
(400)
235⁄8
(600)
91⁄2
(241)
10 x 10
(254 x 254)
All dimensions shown in inches (millimeters).
3.5 (89)
10
(254)
11.125
(283)
2.875 (73)
6.5 (165)
1.625 (42)
9.375
(238)
11.5 (292)
5.125
(130)
3.375 (86)
All dimensions shown in inches (millimeters).
RJ-4 and RJ-6x9
DC
B
A
E
RJ-4 and RJ-6x9
RJ-10x10
C
D
E
AB
RJ-10x10