8. Operating Notes
Power Button
Timer Off Button
Humidistat Button
Fan Speed Button
Child Lock Button
Laundry Drying Mode
(2S)
Press power button once to turn the dehumidifier on, the appliance makes a ‘beep’ sound. By default, appliance
runs on Manual Dehumidifying Mode.
To turn off the appliance, press power button again.
Press Timer off button consecutively to select your preferred timer duration from 1 to 24 hours for automatic shutoff.
Its corresponding indicator will be on. To cancel the timer off setting, press the timer button twice in 5 seconds or
turn off the appliance off and on using the power button.
Press Fan Speed button to select your preferred fan speed setting (low and high) at manual mode and its
corresponding indicator will be on.
Oscillation Button (ALPHA-12 PLUS)
Oscillating flap oscillates from 45°to 90°for better air circulation and optimum diffusion of the dehumidified air throughout
the room.
Anion Function (ALPHA-12 PLUS)
Press and hold the Oscillation button for 2 seconds can active the Ionizer function to fresh up the air quality.
Note: Anion function will be switched off automatically when the fan stops working.
Press and Hold the fan speed button down for 2 seconds to lock the control panel and repeat to deactivate the child lock.
On ALPHA-12 PLUS model, press and hold the Mode button for 2 seconds to lock the buttons.
Mode Button (ALPHA-12 PLUS)
By pressing mode button, you can choose the function of laundry drying mode, sleeping mode and air purifying mode.
At Laundry Drying mode, it operates in continuous dehumidification with high fan speed setting and will turn off
automatically after 6 hours.
Press Manual button to select your target humidity value, 55% RH is recommended for most applications. Pressing
the Manual button will scroll through the options of CO-30%-35%-40%45%-50%-55%-60%-65%-70%-75%-80%-CO.
On the 20L model, you can use the UP and Down buttons to scroll through the options.
Press the button once to check the setting humidity, after a few seconds the display will revert to the current room humidity.
When the relative humidity is below the target humidity, the appliace will go into the standby mode.
Fan will work for a few minutes to blow out the hot air from the appliance.
CO means the appliance can work continuously and without effect of the relative humidity.
