Griffin Technology AP3212 User manual
www.Griffin-Stands.com
Portable Mixer
Cart
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # A P 3 2 1 2
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
Stands.com
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Portable Mixer
Stage Cart. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing
AP3212 into the search bar.
Step 2 –Take the main post (E) and screw in the center
stand tightly to the leg assembly (f), loose main post may
also result in the cart being unstable (see Figure 3).
Step 5 –Felt pads are placed on the mount to protect the
mixer. Stick the felt pads on the mount before placing your
mixer. (see Figure 7)
Step 1 - Locate the leg assembly (F) and open the legs
then screw in the 4 casters and tighten using a wrench
as seen on Figure 1 & Figure 2.
Make sure to not over tighten and all casters are
leveled. Uneven casters may result in the cart being
wobbly and/or unstable. Please note that two of the
casters have locking wheels (G). These are the casters
with the tab. These should be screwed into opposing
legs. The wheels are locked by pushing down on the
tab. (NOTE: Failure to unlock the wheels before moving
the stand can damage the casters and the braking
mechanism.) Make sure to screw the casters all the
way in.If the stand is not sitting level after attaching
the casters, unscrew one (or two) of the casters on the
side of the stand which is leaning to and screw back
again the casters to raise that side of the stand.
Step 3 –Take the chrome center piece (I) that goes in
the main post, pull the locking pin (J) and insert the
chrome center piece. Make sure that the holes in the
chrome post align with the locking pin, turn the locking
pin (you will hear a click sound) to lock it in place.For
additional security of the product tighten the knob (J) on
the main post (see Figure 4).
Step 4 –At the top of the chrome center piece another
locking pin (L) is located pull and place the top mount (A).
Insert the knob nut (D) and the knob handle (C) on the
other side then adjust to your preferred angle and
tighten. Once you reach your preferred angle turn the
locking pin to secure the angle. (see Figure 5 & Figure 6).
Please scan the QR Code below for the product
demonstration video. Or go to the URl shown here and find
the product video. www.Griffin-Stands.com/Videos
Other Griffin Technology Mixer manuals
