Griffin Technology C80 User manual

Company information
and Support
www.Griffin-Stands.com
Straight Cymbal
Stand
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # C 8 0
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[email protected] | www.Griffin-
Stands.com
Product Specifications
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Straight Cymbal
Stand. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing C80
into the search bar.
Thank you for your Purchase
Trouble Shooting

Step 4 – Remove the wingnut on the very top and
place your cymbal on top. Place back the cymbal felts
and the wingnut as seen on Figure 4.
Assembly and
Demonstration
Video
Assembly Instructions
Step 1 – Take the tripod section of the stand and
spread the legs by using two (2) hands and tighten
the knob to secure the legs (See Figure 1) Please
note that under extension of the tripod legs may
cause instability while over extension may cause
stand failure.
Step 2 – Unscrew the knob on the top of the tripod
stand and insert the chrome middle section all the
way down (make sure that the middle pipe is
straight down and use force if resistance is felt while
inserting the pipe). Adjust the length of the chrome
pipe you inserted and use the screw to secure the
height of the stand as shown in Figure 2. With this
you can use the included memory lock and adjust it
to your preferred height.
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 3 – Loosen the knob at the top of the tripod
stand and insert the height adjustment rod. (See
Figure 3)
Step 6 – For safety reasons, please always make sure
to test the stability and safety of the product before
use. Double check all nuts and bolts, knobs and
connectors, make sure that these are tight and
securely fastened before use of your product. Test the
product under light use or light loads the first time to
confirm assembly and structure of the product is
correct.
Step 5 – Adjust the angle of the cymbal using the
height adjustment rod. If your stand is wobbly or
unstable, make sure that the legs are spread wide
or/and bring down the height.