Griffin Technology LK551 User manual

Company information
and Support
www.Griffin-Stands.com
Triple Keyboard
Stand
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # L K 5 5 1
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[email protected] | www.Griffin-
Stands.com
Product Specifications
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Triple Keyboard
Stand. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing LK551
into the search bar.
Thank you for your Purchase
Trouble Shooting

Step 3 – Once the
T-Connectors are
tightened take the
keyboard holder
bar (Part a) and
slide to each T-
connectors on the
braces (Part b).
Tighten the bolts as
seen in Figure 3.
Step 4 – Figure 4 and 5shows the rear telescoping bar
(Part d) being connected to the back of the stand. These
goes from upper right corner to the lower left corner
and vice versa for the other piece. Tighten the bolts to
secure the brackets. These cross brackets are telescopic,
it can be extended or shortened according to your
preference depending on the angle of the V-stands.
Assembly and
Demonstration
Video
Assembly Instructions
Step 1 – Take the
keyboard holder bar
(Part a) for the 3 tier
sections and insert the
bracket mounts for
the keyboard as
shown in Figure 1.
Make sure to insert 2
bracket mounts for
each middle pipe.
Step 5 – Take the bottom telescopic bracket (Part c) and
screw at the base of the braces (Part b). Connect each
end to the coupler and screw in securely as shown in
Figure 6.
Step 6 – Figure 7 above shows how to adjust the bracket
mounts. It can be adjusted side to side and angled. Once
you find you preferred distance and/or angle screw the
knob below the bracket mount to keep your setting. The
padding on the bracket mounts may or may not be
present, if not find the padding in the package and stick it
on the bracket mounts. This will protect your equipment
and the bracket mount from being scratched.
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 2 –Figure 2
shows how to
tighten the T-
connectors on the
braces (Part b).
Make sure that the
T-connector on the
other side is the
same height as the
other side of the
vertical pipe
Step 7 – For safety reasons, please always make sure to
test the stability and safety of the product before use.
Double check all nuts and bolts, knobs and connectors,
make sure that these are tight and securely fastened
before use of your product. Test the product under light
use or light loads the first time to confirm assembly and
structure of the product is correct.