Griffin Technology LK341 User manual

Company information
and Support
www.Griffin-Stands.com
Wood Music
Stand
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # L K 3 4 1
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[email protected] | www.Griffin-
Stands.com
Product Specifications
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Wood Music
Stand. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing LK341
into the search bar.
Thank you for your Purchase
Trouble Shooting

Assembly and
Demonstration
Video
Assembly Instructions
Step 1 – As shown in Figure 1, take the bottom part of
the stand, to spread the legs loosen the knob near the
base and using two hands spread the legs, tighten the
knob to secure the legs of the stand. Spread wide for a
more stable stand.
Step 2 – On the middle part of the stand is a knob, turn to
loosen and the middle pipe can be adjusted to preferred
height. (See Figure 2) Just below the knob is a coupler
with a bolt, which may or may not come loose right out
of the package, make sure that this bolt is tight before
going to step 3.
Step 3 – At the top of the stand is a knob which is the
adjustable tilt section of the music stand, adjust to
preferred angle and slide the wood plate’s bracket and
tighten the small screw knob to keep the wood plate in
place securely. (See Figure 3)
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 4– For safety reasons, please always make sure to
test the stability and safety of the product before use.
Double check all nuts and bolts, knobs and connectors,
make sure that these are tight and securely fastened
before use of your product. Test the product under light
use or light loads the first time to confirm assembly and
structure of the product is correct.