Grip Rite GRTFN250 User manual
WARNING
USER MUST READ OPERATION MANUALBEFORE USING TOOL TO REDUCE THE RISK OF INJURY. FAILURE TO
FOLLOW THESE OPERATIONS MAY RESULT IN SERIOUS INJURY. ALWAYS WEAR SAFETY GLASSES BEFORE
USING THE TOOL. NEVER USE BOTTLED OR COMBUSTIBLE GASES (OXYGEN, ACETYLENE, ETC) ONLY USE
REGULATEDAIR. DISCONNECT AIR SUPPLYWHEN CLEARING A JAM, REPLACING NO-MAR PAD, SERVICING,
OR WHEN TOOL IS NOT IN USE. NEVER CARRY TOOL WITH FINGER ON THE TRIGGER. KEEP FINGER OFF
TRIGGER WHEN NOT DRIVING FASTENERSAND WHEN LOADING OR UNLOADING NAILS. ALWAYS KEEPTOOL
POINTED IN ASAFE DIRECTION. MAX 110 PSI / 7.6 BAR
GRTFN250
16 ga FINISH NAILER
USE 16 ga FINISH NAILS
1”~2-1/2” LENGTH (25.4~63.5mm)
ITEM P/N DESCRIPTION ITEM P/N DESCRIPTION
1 GRTN1880 Hex.Soc.Hd.Bolt 46 GRTN920 Adjusting Nut
2 GRTN660 Bushing, Deflector 47 GRTN900 Adjusting Post
3 GRTN2240 O-Ring 48 GRTN930 Adjusting Spring
4 GRTN670 Deflector 49 GRTN2640 Ball,Steel
5 GRTN2480 O-Ring 50 GRTN2660 E-ring
6 GRTN2960 Cap 51 GRTN890 Spring, Safety
7 GRTN2060 Locknut 52 GRTN950 Lower Safety Post
8 GRTN1930 Hex.Soc.Hd.Bolt 53 GRTN850 Nose, Machined
9 GRTN680 Casket, Cap 54 GRTN840 Lower Door
10 GRTN690 Piston Stopper 55 GRTN2570 Spring Pin
11 GRTN710 Spring 56A GRTN860 SA, Door Latch
12 GRTN2270 O-Ring 57 GRTN870 Grip, Latch
13 GRTN2260 O-Ring 58 GRTN2580 Spring Pin
14 GRTN700 Piston,Head Valve 59 GRTN1870 Hex.Soc.Hd.Bolt
15 GRTN720 Cylinder Seal 60 GRTN1030 Magazine Cover
16 GRTN730 Seal 61 GRTN140 Spring
17 GRTN2250 O-Ring 62 GRTN1060 Spring Stopper
18A GRTN760 Driver Assembly 63 GRTN960 Magazine
19 GRTN2280 O-Ring 64 GRTN2680 Hex.Soc.Hd.Bolt
20 GRTN750 Cylinder Spacer 65 GRTN970 Mail Guide Liner
21 GRTN2330 O-Ring 66 GRTN990 Roller Shaft
22 GRTN740 Cylinder 67 GRTN1010 Pusher Guide
23 GRTN770 Bumper 68 GRTN1040 Spring
24 GRTN780 Driver Guide 69 GRTN1000 Pusher
25A GRTN2970 Body Assembly 70 GRTN1020 Bracket
26 GRTN4430 O-Ring 71 GRTN2690 Hex.Soc.Hd.Bolt
27 GRTN4450 End Cap 72 GRTN2700 Hex.Soc.Hd.Bolt
28 GRTN2220 O-Ring 73 GRTN2590 Washer
29 GRTN2240 O-Ring 74 GRTN910 Rubber Pad
30 GRTN630 Valve 75 GRTN980 Bushing
31 GRTN2100 O-Ring 76 GRTN1050 Spacer
32 GRTN6250 O-Ring 77 GRTN2140 O-Ring
33 GRTN2170 O-Ring 78 GRTN7260 O-Ring
34 GRTN805 Valve Plunger 79A GRTN4150 Belt hook Assembly
35 GRTN640 Spring 79A-1 GRTN4480 End Cap
36 GRTN2230 O-Ring 79A-2 GRTN4110 Belt hook
37 GRTN8130 Plunger 79A-3 GRTN4140 O-Ring
38 GRTN820 Plunger Cap 79A-4 GRTN4120 Cover,Belt hook
39 GRTN2550 Spring Pin 79A-5 GRTN4440 C-ring
40 GRTN2530 Spring Pin
41A GRTN8090 Trigger Assembly
42 GRTN3807 Guide, Contact Trip
43 GRTN790 Pin Trigger
44 GRTN2210 Grommet
45 GRTN8140 Contact Trip, Upper
WARNING
USER MUST READ OPERATION MANUALBEFORE USING TOOL TO REDUCE THE RISK OF INJURY. FAILURE TO
FOLLOW THESE OPERATIONS MAY RESULT IN SERIOUS INJURY. ALWAYS WEAR SAFETY GLASSES BEFORE
USING THE TOOL. NEVER USE BOTTLED OR COMBUSTIBLE GASES (OXYGEN, ACETYLENE, ETC) ONLY USE
REGULATEDAIR. DISCONNECT AIR SUPPLYWHEN CLEARING A JAM, REPLACING NO-MAR PAD, SERVICING,
OR WHEN TOOL IS NOT IN USE. NEVER CARRY TOOL WITH FINGER ON THE TRIGGER. KEEP FINGER OFF
TRIGGER WHEN NOT DRIVING FASTENERSAND WHEN LOADING OR UNLOADING NAILS. ALWAYS KEEPTOOL
POINTED IN ASAFE DIRECTION. MAX 110 PSI / 7.6 BAR
GRTFN250
16 ga FINISH NAILER
USE 16 ga FINISH NAILS
1”~2-1/2” LENGTH (25.4~63.5mm)
Other manuals for GRTFN250
1
Other Grip Rite Nail Gun manuals
