Grizzly T26979 User manual

For questions or help with this product contact Tech Support at [phone] or [e-mail]
MODEL T26979
3-IN-1 WORKPIECE
SUPPORT STAND
INSTRUCTIONS
COPYRIGHT © JANUARY 2015 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 06/14) #AW17097 PRINTED IN CHINA
Introduction
The T26979 3-in-1 Workpiece Support Stand will
support up to 250 lbs. It is adjustable from 271⁄2"
to 43". The stand has a small footprint of 22" X
18". The stand has three positions: static, multi-
directional, and single plane.
Push lock knob to release leg, then extend leg
until it locks in open position.
Setup
Figure 1. Model T26979 controls and
components.
Lock
Knob
Leveling
Dial
Lock
Lever
Three-Position
Head
Lift up on head to disengage pivot stop, then
rotate head into positive stop at desired position.
Positive stop does not allow further movement.
(see Figure 2).
Note: To prevent pinching, use two hands and lift
from outside of head.
V1.01.15
1. Turn lock lever counterclockwise to adjust
head to needed height.
2. Turn lock lever clockwise to secure head in
place.
Adjusting Height
Push lock knob towards stand, then slide legs
towards each other to lock.
Collapsing Legs
Adjusting Head
Figure 2. Three head positions.
Static Multi-Directional
Single Plane

-2- T26979 3-in-1 Workpiece Support Stand (Mfd. 6/14)
1
2
5
6
9
7
8
10
13
14
14
15
16
17
17
18
19
grizzly.com
23
24
3
4
11
12
20
21
22
T26979 Parts Breakdown and List
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call [phone] or visit our online parts store at www.grizzly.com to check for availability.
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT26979001 MAIN ROLLER 13 PT26979013 CAP SCREW M6-1 X 35
2 PT26979002 ROLLER CHASSIS 14 PT26979014 FLAT WASHER 6MM
3 PT26979003 LEG BRACE 15 PT26979015 LOCK NUT M6-1
4 PT26979004 HEIGHT LOCK LEVER 16 PT26979016 CAP SCREW M8-1.25 X 50
5 PT26979005 EXTENSION BAR 17 PT26979017 FLAT WASHER 8MM
6 PT26979006 MAIN LEG 18 PT26979018 LOCK NUT M8-1.25
7 PT26979007 LEVELING BOLT M6-1 X 40 19 PT26979019 PLASTIC CAP
8 PT26979008 RUBBER CAP 20 PT26979020 HEX BOLT M8-1.25 X 25
9 PT26979009 SECONDARY LEG 21 PT26979021 HEX NUT M8-1.25
10 PT26979010 ROLLER BALL ASSEMBLY 22 PT26979022 LEG LOCK KNOB M8-1.25
11 PT26979011 LEG LOCK SHANK 23 PT26979023 GRIZZLY.COM LABEL
12 PT26979012 COMPRESSION SPRING 24 PT26979024 GRIZZLY GREEN TOUCH-UP PAINT