Grizzly G0651 User manual
COPYRIGHT © JULY, 2017 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ES19102 PRINTED IN TAIWAN
The following changes were recently made since the owner's manual was printed:
• Revised inventory list.
• Revised Step 15 in Assembly section.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0651/G0652
***IMPORTANT UPDATE***
For Machines Mfd. Since 07/17
and Owner's Manual Revised 09/10
Revised Outfeed Table Inventory
Box Contents: (Figure 10)Qty
F. Front Outfeed Table Bracket ...................... 1
Fasteners (and where used): Qty
• Tap Screws M4 x 16
(Outfeed Table/Bracket) ............................. 8
Revised Assembly Steps
15. Attach front outfeed table bracket to outfeed
table with (8) M4 x 16 tap screws (see Figure
23), and then repeat Steps 8-11 to install the
feet, support legs, and shelf end plate on the
outfeed table.
Figure 10. Outfeed table components.
F
Figure 23. Outfeed table fastened to rear rail.
x8
Outfeed Table Bracket
COPYRIGHT © MAY, 2017 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JH18980 PRINTED IN TAIWAN
The following changes were recently made to this machine since the owner's manual was printed:
• Updated G0651 wiring diagram.
• Updated G0652 220V & 440V wiring diagrams.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0651 & G0652
***IMPORTANT UPDATE***
For Machines Mfd. Since 5/17
and Owner's Manual Revised 9/10
Updated G0652 220V Motor Wiring Updated G0652 440V Motor Wiring
-2- G0651 & G0652 Update (Mfd. Since 5/17)
Ground
Run
Capacitor
50MFD
250VAC
Start
Capacitor
300MFD
125VAC
220V Motor
NO 13
L2 3 L3 5L1 1
A
T1 2 T2 4 T3 6
NC21
NC22
NO 14
18
15
12
3/41/2 5/6
14
13
24
23
B
9896
95
Magnetic Switch
Assembly MPE-18
Angle Sensor
Digital Readout
AC2 R18
AC1
SDE
MA-18
OFF
On/Off Switch
ON
Hot
Hot
Ground
220
VAC
6-15 Plug
(Included)
220 VAC
SDE RA-20
G
Installation work and
electrical wiring
must be done by
qualified electrician
in accordance with
all applicable codes
and standards.
(Figure 149,
Page 83)
(Figure 150, Page 83)
(Figure 147, Page 83)
Figure 151. G0651
capacitors. (Figure 148, Page 83)
(Figure 150, Page 83)
(Replaces Page 84)
Updated G0651 Wiring Diagram 220V, 1-Ph
G0651 & G0652 Update (Mfd. Since 5/17) -3-
NO 13
L2 3 L3 5L1 1
A
T1 2 T2 4 T3 6
NC21
NC22
NO 14
3/41/2 5/6
B
9896
95
Ground
220V 3-Ph Motor
12 6
440V
220V
AC-1
AC-2
14
13
24
23
OFF ON
GND
2
SDE
MA-18
SDE RA-20
54
6
1
7
9
3
8
If connecting machine to a phase
converter, the manufactured leg
must be connected to terminal L3.
PHASE CONVERTER
On/Off Switch
Magnetic
Switch
Assembly
MPE-30
Angle
Sensor
Digital
Readout
Power Junction Box Ground
Hot
Hot
Hot
DISCONNECT
SWITCH
(as recommended)
3-PHASE
220VAC
GND
(Replaces Page 86)
Updated G0652 Wiring Diagram 220V, 3-Ph
(Figure 148, Page 83)
(Figure 149,
Page 83)
(Figure 152,
Page 85)
(Figure 153, Page 85)
(Figure 149,
Page 83)
-4- G0651 & G0652 Update (Mfd. Since 5/17)
Updated G0652 Wiring Diagram 440V, 3-Ph
NO 13
L2 3 L3 5L1 1
A
T1 2 T2 4 T3 6
NC21
NC22
NO 14
3/41/2 5/6
B
9896
95
Ground
12 6
220V
14
13
24
23
OFF ON
GND
SDE
MA-18
If motor rotates in opposite direc-
tion, swap any two power source
wires at the power junction box.
MOTOR DIRECTION
Ground
Hot
Hot
Hot
DISCONNECT
SWITCH
(as recommended)
3-PHASE
440 VAC
On/Off Switch
Magnetic
Switch
Assembly
MPE-30
440V 3-Ph Motor
SDE RA-20
Power Junction Box
440V
GND
AC-1
AC-2 Angle
Sensor
Digital
Readout
6
9
1
2
3
8
4
7
5
(Figure 155, Page 85)
(Figure 148, Page 83)
(Figure
154,
Page 85)
(Figure 149,
Page 83)
(Figure 149,
Page 83)
(Replaces Page 87)
COPYRIGHT © MAY, 2014 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ST16538 PRINTED IN TAIWAN
21-5 21-7
Revised Capacitor Parts
REF PART # DESCRIPTION
21-5 P0651021-5 R CAPACITOR 50M 250V 1-3/4 X 3-3/8
21-7 P0651021-7 S CAPACITOR 300M 125V 1-3/4 X 3-3/8
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0651
***IMPORTANT UPDATE***
For Machines Mfd. Since January, 2010
& Owner's Manual Revised September, 2010
We recently discovered the following mistake in the owner's manual:
• Start capacitor and run capacitor specs shown incorrectly in the parts breakdown and wiring.
This document provides the relevant updates to the owner's manual that no longer applies—aside from this
information, all other content in the owner's manual applies and MUST be read and understood for your own
safety. IMPORTANT: Keep this update with the owner's manual for future reference.
-2- G0561 Update (Mfg. Since 1/10)
Ground
Run
Capacitor
50MFD
250VAC
Start
Capacitor
300MFD
125VAC
220V Motor
NO 13
L2 3 L3 5L1 1
A
T1 2 T2 4 T3 6
NC15
NC16
NO 14
18
15
12
3/41/2 5/6
14
13
24
23
B
9896
95
Magnetic Switch
Assembly MPE-18
Angle Sensor
Digital Readout
AC2 R18
AC1
SDE
MA-18
OFF
On/Off Switch
ON
Hot
Hot
Ground
220
VAC
6-15 Plug
(Included)
220 VAC
SDE RA-20
G
Installation work and
electrical wiring
must be done by
qualified electrician
in accordance with
all applicable codes
and standards.
G0651 Wiring Diagram 220V, 1-Ph
MODEL G0651/G0652
10" EXTREME SERIES
TABLE SAW W/RIVING KNIFE
OWNER'S MANUAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
4HISMANUALPROVIDESCRITICALSAFETYINSTRUCTIONSONTHEPROPERSETUP
OPERATIONMAINTENANCEANDSERVICEOFTHISMACHINEEQUIPMENT
&AILURETOREADUNDERSTANDANDFOLLOWTHEINSTRUCTIONSGIVENINTHIS
MANUALMAYRESULTINSERIOUSPERSONALINJURYINCLUDINGAMPUTATION
ELECTROCUTIONORDEATH
4HEOWNEROFTHISMACHINEEQUIPMENTISSOLELYRESPONSIBLEFORITS
SAFEUSE4HISRESPONSIBILITYINCLUDESBUTISNOTLIMITEDTOPROPER
INSTALLATIONINASAFEENVIRONMENTPERSONNELTRAININGANDUSAGE
AUTHORIZATIONPROPERINSPECTIONANDMAINTENANCEMANUALAVAILABILITY
ANDCOMPREHENSIONAPPLICATIONOFSAFETYDEVICESBLADECUTTERINTEG
RITYANDTHEUSAGEOFPERSONALPROTECTIVEEQUIPMENT
4HEMANUFACTURERWILLNOTBEHELDLIABLEFORINJURYORPROPERTYDAMAGE
FROMNEGLIGENCEIMPROPERTRAININGMACHINEMODIFICATIONSORMISUSE
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Table of Contents
INTRODUCTION............................................... 2
SECTION 1: SAFETY..................................... 10
SECTION 2: POWER SUPPLY ...................... 15
SECTION 3: SETUP ....................................... 19
SECTION 4: OPERATIONS ........................... 33
SECTION 5: SHOP MADE SAFETY
ACCESSORIES .............................................. 53
SECTION 6: AFTERMARKET ACCESSORIES
FROM GRIZZLY ............................................. 61
SECTION 7: MAINTENANCE......................... 65
SECTION 8: SERVICE ................................... 67
SECTION 9: WIRING...................................... 82
SECTION 10: PARTS..................................... 88
WARRANTY AND RETURNS ...................... 101
INTRODUCTION
LZhiVcYWZ]^cYdjgbVX]^cZh#>[ndj]VkZVcn
hZgk^XZfjZhi^dch!eVgihgZfjZhihdg\ZcZgVafjZh"
i^dchVWdjii]ZbVX]^cZ!eaZVhZXVaadglg^iZjhVi
i]ZadXVi^dca^hiZYWZadl#
<g^ooan>cYjhig^Va!>cX#
&'%(AnXdb^c\BVaa8^gXaZ
BjcXn!E6&,,*+
E]dcZ/*,%*)+".++(
:"BV^a/iZX]hjeedgi5\g^ooan#Xdb
LZlVcindjg[ZZYWVX`dci]^hbVcjVa#>[ndjXVc
iV`Z i]Z i^bZ! eaZVhZ ZbV^a dg lg^iZ id jh Vi i]Z
VYYgZhhWZadlVcYiZaajh]dllZY^Y/
<g^ooan>cYjhig^Va!>cX#
8$DIZX]c^XVa9dXjbZciVi^dcBVcV\Zg
E#D#7dm'%+.
7Zaa^c\]Vb!L6.-'',"'%+.
:bV^a/bVcjVah5\g^ooan#Xdb
Contact Info
LZVgZegdjYidd[[Zgi]^hbVcjVal^i]ndjgcZl
bVX]^cZ LZkZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi
l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h!
VcY e]did\gVe]h d[ i]Z bVX]^cZ lZ jhZY l]Zc
lg^i^c\i]^hbVcjVa#=dlZkZg!hdbZi^bZhlZhi^aa
bV`ZVcdXXVh^dcVab^hiV`Z#
6ahd!dl^c\iddjgeda^Xn d[Xdci^cjdjh^begdkZ"
bZci!your machine may not exactly match the
manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["
[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh
ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi
bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#
7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg
bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z
bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh
YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY
bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#
;dgndjgXdckZc^ZcXZ!lZedhiVaaVkV^aVWaZbVc"
jVahVcYbVcjVajeYViZh[dg[gZZdcdjglZWh^iZ
Viwww.grizzly.com#6cnjeYViZhidndjgbdYZa
d[ bVX]^cZ l^aa WZ gZ[aZXiZY ^c i]ZhZ YdXjbZcih
VhhddcVhi]ZnVgZXdbeaZiZ#
BVcj[VXijgZ9ViZ
d[NdjgBVX]^cZ
Manual Accuracy
Machine Description
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0651
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0651 10" HEAVY-DUTY CABINET TABLE SAW
WITH RIVING KNIFE
Product Dimensions:
Weight.............................................................................................................................................................. 430 lbs.
Length/Width/Height.................................................................................................................91-1/2 x 75 x 40-5/8 in.
Foot Print (Length/Width)....................................................................................................................... 22-7/8 x 21 in.
Shipping Dimensions:
Carton #1
Type................................................................................................................................................. Wood Crate
Content.................................................................................................................................................. Machine
Weight.................................................................................................................................................... 456 lbs.
Length/Width/Height.................................................................................................43-3/4 x 34-5/8 x 41-3/4 in.
Carton #2
Type................................................................................................................................................... Cardboard
Content........................................................................................................................................................Rails
Weight...................................................................................................................................................... 90 lbs.
Length/Width/Height...........................................................................................................96 x 7-3/4 x 8-5/8 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content......................................................................................................................................................Fence
Weight...................................................................................................................................................... 24 lbs.
Length/Width/Height............................................................................................................... 44 x 18 x 8-1/4 in.
Carton #4
Type................................................................................................................................................. Wood Crate
Content.................................................................................................................................... Extension Tables
Weight.................................................................................................................................................... 136 lbs.
Length/Width/Height.......................................................................................................44 x 29-3/8 x 11-3/8 in.
Electrical:
Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz
Minimum Circuit Size........................................................................................................................................ 15 amp
Switch......................................................................................................... Magnetic, w/Thermal Overload Protection
Switch Voltage...................................................................................................................................................... 220V
Cord Length.......................................................................................................................................................... 10 ft.
Cord Gauge....................................................................................................................................................14 gauge
Plug Included.......................................................................................................................................................... Yes
Included Plug/Outlet Type......................................................................................................................................6-15
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0651
Motors:
Main
Type.................................................................................................................. TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................3 HP
Voltage........................................................................................................................................................220V
Phase........................................................................................................................................................ Single
Amps.............................................................................................................................................................13A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ................................................................................................................................... Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Blade Information
Maximum Blade Diameter.......................................................................................................................... 10 in.
Riving Knife/Spreader Thickness..............................................................................................0.09 in. (2.3mm)
Required Blade Body Thickness............................................................................ 0.074-0.082 in. (1.9-2.1mm)
Required Blade Kerf Thickness.............................................................................. 0.114-0.122 in. (2.9-3.1mm)
Maximum Width Of Dado.......................................................................................................................... 3/4 in.
Blade Tilt....................................................................................................................................... Left 0-45 deg.
Arbor Size..................................................................................................................................................5/8 in.
Arbor Speed....................................................................................................................................... 4000 RPM
Arbor Bearings........................................................................................... Sealed and Permenantly Lubricated
Cutting Capacities
Maximum Depth Of Cut At 90 Degrees................................................................................................3-3/16 in.
Maximum Depth Of Cut At 45 Degrees................................................................................................2-3/16 in.
Maximum Rip To Right Of Blade-Standard................................................................................................ 52 in.
Maximum Rip To Left Of Blade.................................................................................................................. 18 in.
Table Information
Floor To Table Height.......................................................................................................................... 34-7/8 in.
Table Size Width.................................................................................................................................. 21-1/4 in.
Table Size Depth........................................................................................................................................27 in.
Table Size Thickness............................................................................................................................. 1-1/2 in.
Table Size With Extension Wings Width.............................................................................................. 75-3/4 in.
Table Size With Extension Wings Depth....................................................................................................27 in.
Table Size With Extension Wings Thickness......................................................................................... 1-1/2 in.
Distance Front Of Table To Center Of Blade....................................................................................... 14-7/8 in.
Distance Front Of Table to Blade At Maximum Cut........................................................................... 10-5/16 in.
Extension Table Size Width................................................................................................................. 42-1/2 in.
Extension Table Size Depth....................................................................................................................... 27 in.
Extension Table Size Thickness............................................................................................................... 3/4 in.
Fence Information
Fence Type...................................................................Single Lever, Front Locking, Aluminum Extruded Body
Fence Size Length............................................................................................................................... 40-1/4 in.
Fence Size Width................................................................................................................................... 4-1/8 in.
Fence Size Height..................................................................................................................................2-1/2 in.
Fence Rail Type.......................................................................................................................... Square Tubing
Fence Rail Length................................................................................................................................ 40-1/4 in.
Fence Rail Width....................................................................................................................................... 5/8 in.
Fence Rail Height...................................................................................................................................2-1/2 in.
Miter Gauge Information
Miter Gauge Slot Type...............................................................................................................................T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height.................................................................................................................... 3/8 in.
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0651
Construction
Table Construction............................................................................................................................... Cast Iron
Wings Construction.............................................................................................................................. Cast Iron
Cabinet Construction.............................................................................................................. Pre-Formed Steel
Trunnions Construction........................................................................................................................ Cast Iron
Base Construction.................................................................................................................. Pre-Formed Steel
Body Assembly Contruction....................................................................................................Pre-Formed Steel
Fence Assembly Construction....................................................................................Aluminum Extruded Body
Rails Construction.......................................................................................................................................Steel
Miter Guage Construction................................................................................ Aluminum Body with Steel Body
Guard Construction................................................................................................... Steel Splitter/Clear Plastic
Other Related Information
Paint........................................................................................................................................... Powder Coated
Number Of Dust Ports.......................................................................................................................................1
Dust Port Size.............................................................................................................................................. 4 in.
Long Rails............................................................................................................................................ 91-1/2 in.
Features:
Included Outfeed & Extension Tables w/Storage Shelves
Digital Tilt Guage
Riving Knife
Blade Guard
Included 10" Blade
Optional Dado Insert
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0652
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0652 10" 5 HP 3-PHASE HEAVY-DUTY CABINET
TABLE SAW WITH RIVING KNIFE
Product Dimensions:
Weight.............................................................................................................................................................. 430 lbs.
Length/Width/Height.................................................................................................................91-1/2 x 75 x 40-5/8 in.
Foot Print (Length/Width)....................................................................................................................... 22-7/8 x 21 in.
Shipping Dimensions:
Carton #1
Type................................................................................................................................................. Wood Crate
Content.................................................................................................................................................. Machine
Weight.................................................................................................................................................... 472 lbs.
Length/Width/Height................................................................................................................... 38 x 30 x 42 in.
Carton #2
Type................................................................................................................................................. Wood Crate
Content.................................................................................................................................. Front & Rear Rails
Weight...................................................................................................................................................... 86 lbs.
Length/Width/Height....................................................................................................................... 96 x 7 x 9 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content......................................................................................................................................................Fence
Weight...................................................................................................................................................... 24 lbs.
Length/Width/Height..................................................................................................................... 45 x 19 x 9 in.
Carton #4
Type................................................................................................................................................... Cardboard
Content.............................................................................................................. Right & Rear Extension Tables
Weight.................................................................................................................................................... 138 lbs.
Length/Width/Height................................................................................................................... 44 x 29 x 11 in.
Electrical:
Power Requirement..........................................................................................................220V/440V, 3-Phase, 60 Hz
Minimum Circuit Size...........................................................................................15 amps @ 220V; 15 amps @ 440V
Switch......................................................................................................... Magnetic, w/Thermal Overload Protection
Switch Voltage............................................................................................................................................... 220/440V
Plug Included............................................................................................................................................................No
Recommended Plug/Outlet Type...........................................................................Hardwire w/Locking Shutoff Switch
Voltage Conversion Kit........................................................................................................................................... Yes
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0652
Motors:
Main
Type.................................................................................................................. TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................5 HP
Voltage.............................................................................................................................................. 220V/440V
Prewired......................................................................................................................................................220V
Phase.........................................................................................................................................................Three
Amps..........................................................................................................................................................12/6A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ................................................................................................................................... Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Blade Information
Maximum Blade Diameter.......................................................................................................................... 10 in.
Riving Knife/Spreader Thickness..............................................................................................0.09 in. (2.3mm)
Required Blade Body Thickness............................................................................ 0.074-0.082 in. (1.9-2.1mm)
Required Blade Kerf Thickness.............................................................................. 0.114-0.122 in. (2.9-3.1mm)
Maximum Width Of Dado.......................................................................................................................... 3/4 in.
Blade Tilt....................................................................................................................................... Left 0-45 deg.
Arbor Size..................................................................................................................................................5/8 in.
Arbor Speed....................................................................................................................................... 4000 RPM
Arbor Bearings........................................................................................... Sealed and Permenantly Lubricated
Cutting Capacities
Maximum Depth Of Cut At 90 Degrees................................................................................................3-3/16 in.
Maximum Depth Of Cut At 45 Degrees................................................................................................2-3/16 in.
Maximum Rip To Right Of Blade-Standard................................................................................................ 52 in.
Maximum Rip To Left Of Blade.................................................................................................................. 18 in.
Table Information
Floor To Table Height.......................................................................................................................... 34-7/8 in.
Table Size Width.................................................................................................................................. 21-1/4 in.
Table Size Depth........................................................................................................................................27 in.
Table Size Thickness............................................................................................................................. 1-1/2 in.
Table Size With Extension Wings Width.............................................................................................. 75-3/4 in.
Table Size With Extension Wings Depth....................................................................................................27 in.
Table Size With Extension Wings Thickness......................................................................................... 1-1/2 in.
Distance Front Of Table To Center Of Blade....................................................................................... 14-7/8 in.
Distance Front Of Table to Blade At Maximum Cut........................................................................... 10-5/16 in.
Extension Table Size Width................................................................................................................. 42-1/2 in.
Extension Table Size Depth....................................................................................................................... 27 in.
Extension Table Size Thickness............................................................................................................... 3/4 in.
Fence Information
Fence Type...................................................................Single Lever, Front Locking, Aluminum Extruded Body
Fence Size Length............................................................................................................................... 40-1/4 in.
Fence Size Width................................................................................................................................... 4-1/8 in.
Fence Size Height..................................................................................................................................2-1/2 in.
Fence Rail Type.......................................................................................................................... Square Tubing
Fence Rail Length................................................................................................................................ 40-1/4 in.
Fence Rail Width....................................................................................................................................... 5/8 in.
Fence Rail Height...................................................................................................................................2-1/2 in.
The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0652
Miter Gauge Information
Miter Gauge Slot Type...............................................................................................................................T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height.................................................................................................................... 3/8 in.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Wings Construction.............................................................................................................................. Cast Iron
Cabinet Construction.............................................................................................................. Pre-Formed Steel
Trunnions Construction........................................................................................................................ Cast Iron
Base Construction.................................................................................................................. Pre-Formed Steel
Body Assembly Contruction....................................................................................................Pre-Formed Steel
Fence Assembly Construction....................................................................................Aluminum Extruded Body
Rails Construction.......................................................................................................................................Steel
Miter Guage Construction................................................................................ Aluminum Body with Steel Body
Guard Construction................................................................................................... Steel Splitter/Clear Plastic
Other Related Information
Paint........................................................................................................................................... Powder Coated
Number Of Dust Ports.......................................................................................................................................1
Dust Port Size.............................................................................................................................................. 4 in.
Long Rails............................................................................................................................................ 91-1/2 in.
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ..........................................................................................................................Front Cabinet
Features:
Included Outfeed & Extension Tables w/Storage Shelves
Digital Tilt Guage
Riving Knife
Blade Guard
Included 10" Blade
Optional Dado Insert
Identification
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
Figure 1.
For Your Own Safety Read Instruction
Manual Before Operating Saw
a) Wear eye protection.
b) Use saw-blade guard and spreader for
every operation for which it can be used,
including all through sawing.
c) Keep hands out of the line of saw blade.
d) Use a push-stick when required.
e) Pay particular attention to instructions
on reducing risk of kickback.
f) Do not perform any operation freehand.
g) Never reach around or over saw blade.
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of impor-
tance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
WEARING PROPER APPAREL. 9d cdi lZVg
Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ
ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg
XdkZgadc\]V^g#LZVgcdc"ha^e [ddilZVgidVkd^Y
VXX^YZciVaha^ehl]^X]XdjaYXVjhZVadhhd[ldg`"
e^ZXZXdcigda#
HEARING PROTECTION. 6alVnh lZVg ]ZVg"
^c\egdiZXi^dcl]ZcdeZgVi^c\dg dWhZgk^^c\adjY
bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ
l^i]dji]ZVg^c\ egdiZXi^dcXVcXVjhZ eZgbVcZci
]ZVg^c\adhh#
MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc
gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z
^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc
Y^higVXiZY#
OWNER’S MANUAL. GZVY VcY jcYZghiVcY
i]^h dlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#
JcigV^cZYjhZghXVcWZhZg^djhan]jgi#
EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY
hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg
dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ
^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn
ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#
HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\
bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg
adc\"iZgb gZhe^gVidgn YVbV\Z# 7Z VlVgZ d[ Yjhi
]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!
VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid
gZYjXZndjgg^h`#
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
SECTION 1: SAFETY
DISCONNECTING POWER SUPPLY.6alVnhY^h"
XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg"
k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih!
WaVYZh!XjiiZgh! ZiX##BV`Z hjgZhl^iX] ^h^c D;;
edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVcjcZmeZXi"
ZYdgjc^ciZci^dcVahiVgi#
APPROVED OPERATION. JcigV^cZY deZgVidgh
XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl
igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ
bVX]^cZ# L]Zc bVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"
XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji
bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan
VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[
DANGEROUS ENVIRONMENTS. 9dcdijhZ
bVX]^cZgn ^c lZi dg gV^cn adXVi^dch! XajiiZgZY
VgZVh! VgdjcY [aVbbVWaZh! dg ^c eddgan"a^i VgZVh#
@ZZe ldg` VgZV XaZVc! Ygn! VcY lZaa"a^\]iZY id
b^c^b^oZg^h`d[^c_jgn#
ONLY USE AS INTENDED. Dcan jhZ bVX]^cZ
[dg ^ih ^ciZcYZY ejgedhZ# CZkZg bdY^[n dg VaiZg
bVX]^cZ[dgVejgedhZcdi^ciZcYZYWni]ZbVcj"
[VXijgZgdghZg^djh^c_jgnbVngZhjai
USE RECOMMENDED ACCESSORIES.8dchjai
i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"
dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"
hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#
CHILDREN & BYSTANDERS. @ZZeX]^aYgZc
VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`
VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"
ZghWZXdbZVY^higVXi^dc#
REMOVE ADJUSTING TOOLS.CZkZgaZVkZ
VY_jhibZciiddah!X]jX``Znh!lgZcX]Zh!ZiX#^cdg
dcbVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n
gZbdkVaWZ[dgZhiVgi^c\
SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ
XaVbehdg k^hZhidhZXjgZ ldg`e^ZXZ#6 hZXjgZY
ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb
iddeZgViZi]ZbVX]^cZ#
FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY
ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#
;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa
ndjg]VcY^cidi]ZXji#
FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#
>il^aa Ydi]Z _dWhV[Zg VcYWZiiZg Vii]ZgViZ [dg
l]^X]^ilVhYZh^\cZY#
GUARDS & COVERS. <jVgYh VcY XdkZgh XVc
egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk^c\
eVgih dg [an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ egde"
Zgan^chiVaaZY!jcYVbV\ZY!VcYldg`^c\XdggZXian
WZ[dgZjh^c\bVX]^cZ#
NEVER STAND ON MACHINE.HZg^djh^c_jgndg
VXX^YZciVa XdciVXi l^i] Xjii^c\ idda bVn dXXjg ^[
bVX]^cZ^hi^eeZY#BVX]^cZbVnWZYVbV\ZY#
STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"
^c\deZgVi^dch\gZVian^cXgZVhZhi]Zg^h`d[^c_jgn
VcY adhh d[ Xdcigda# KZg^[n bVX]^cZh VgZ hiVWaZ$
hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ adX`ZY
WZ[dgZhiVgi^c\#
AWKWARD POSITIONS. @ZZe egdeZg [ddi^c\
VcYWVaVcXZViVaai^bZhl]ZcdeZgVi^c\bVX]^cZ#
9dcdidkZggZVX]6kd^YVl`lVgY]VcYedh^i^dch
i]Vi bV`Z ldg`e^ZXZ Xdcigda Y^[[^Xjai dg ^cXgZVhZ
i]Zg^h`d[VXX^YZciVa^c_jgn#
UNATTENDED OPERATION. CZkZgaZVkZ
bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ
OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide
WZ[dgZlVa`^c\VlVn#
MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ
^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe
bVX]^cZ^c\ddYldg`^c\XdcY^i^dc#6c^begdeZgan
bV^ciV^cZYbVX]^cZbVn^cXgZVhZi]Zg^h`d[hZg^"
djh^c_jgn#
CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi
bVX]^cZ [dg YVbV\ZY eVgih! addhZ Wdaih! b^h"
VY_jhiZY dg b^h"Va^\cZY eVgih! W^cY^c\! dg Vcn
di]Zg XdcY^i^dch i]Vi bVn V[[ZXi hV[Z deZgVi^dc#
6alVnhgZeV^gdggZeaVXZYVbV\ZYdgb^h"VY_jhi"
ZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#
EXPERIENCING DIFFICULTIES. >[ViVcni^bZ
ndjVgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z
^ciZcYZY deZgVi^dc!hidejh^c\i]ZbVX]^cZ
8dciVXidjg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,%*)+".++(#
This manual suits for next models
1
Table of contents
Other Grizzly Saw manuals
Grizzly
Grizzly G0938 User manual
Grizzly
Grizzly G0742 User manual
Grizzly
Grizzly G0614 User manual
Grizzly
Grizzly T10687 User manual
Grizzly
Grizzly G0772 User manual
Grizzly
Grizzly T10824 User manual
Grizzly
Grizzly G0575 Quick start guide
Grizzly
Grizzly G0690 User manual
Grizzly
Grizzly G0588 User manual
Grizzly
Grizzly g0555lanv insert User manual
Grizzly
Grizzly G8993 User manual
Grizzly
Grizzly T31634 User manual
Grizzly
Grizzly EXTREME G0555X User manual
Grizzly
Grizzly G0674 User manual
Grizzly
Grizzly G1258 User manual
Grizzly
Grizzly G8122 User manual
Grizzly
Grizzly G0457 User manual
Grizzly
Grizzly G7211 User manual
Grizzly
Grizzly G0503 User manual
Grizzly
Grizzly H8145 Quick start guide
Popular Saw manuals by other brands
Evolution
Evolution R185 SMS Original instructions
Scheppach
Scheppach HM80DB Translation from the original instruction manual
jcb
jcb JCB-MS-305SB-L Instructions & user's manual
DeWalt
DeWalt DW728 instruction manual
Clarke
Clarke CLS400 Operating & maintenance instructions
Makita
Makita JR3010 instruction manual
Parkside
Parkside PDS 120 B2 Operating and safety instructions
DeWalt
DeWalt DW706 user manual
widos
widos RSR 630 Working Instructions Translation
Parkside
Parkside PHKS 1350 D3 Translation of the original instructions
Scheppach
Scheppach HS80 Translation of original instruction manual
Vigor
Vigor VS-400 instruction manual