Groov-e GV-TT01 User manual

GV-TT01
VINTAGE TURNTABLE
VINYL RECORD PLAYER WITH BUILT-IN
SPEAKERS
INSTRUCTION MANUAL

IMPORTANT SAFETY INSTRUCTIONS:
1. Read the instructions. All uses guidelines must be read before start device.
2. Keep the instructions for future use.
3. Attention, use and security guidelines must be respected.
4. The device must not be used near water or be put in contact with moisture.
5. Make sure has no liquid is spilled on device and device openings.
6. Move device carefully, avoid shocks.
7. Do not block the breakdown of the device outputs.
8. Do not place the device near from a heat source (e.g. radiator). Do not expose it to the Sun.
9. Plug the device as indicate on this information form.
10. This device has a connection with overload protection (security device) decision-making. If the
replacement of decision-making is required, please you send has an experienced or the device
manufacturer technician.
11. For cleaning the device, please follow the recommendations of the notice.
12. The sector cord should be unplugged a long period of use.
13. Device shall be repaired by a qualified person when:
a. the taken or the power cord is damaged,
b. objects have fallen into the apparatus or a liquid has been spilled into device,
c. device was exposes to the rain,
d. device does not work correctly without notable exterior change,
e. device fell and the subwoofer is broken.
14. The user shall not try to maintain device beyond that which is described in this information
form. The guarantee would negate.

1) Dust cover
2) Left speaker
3) 3.5mm earphone jack
4) On/Off switch
5) Power LED Indicator
6) Right speaker
7) Volume control knob
8) Tone control knob
9) 45 RPM record adaptor
10)Turntable speed selector
11)Auto stop switch
12)Tone arm rest holder
13)Line out socket (L/R)
14)AC power cord
CONNECTION
1. Connect the Power Cord (14) to an AC outlet.
2. Turn on the power by On/Off switch (4) and the power LED indicator (5) will light up, your system is
now ready to play your music. Please refer to the Operations section of this Manual for details.
STEREO PHONOGRAPH OPERATION
Please Note - Before Use
-Remove the stylus protector.
-Make sure that the tone arm is unlocked and free to move from the tone arm
rest prior to operating. Lock the tone arm again when not in use.
1. Raise the turntable dust cover.
2. Place the record on the platter (use the 45 RPM record adaptor (9) if you are playing 45 RPM records).
3. Set the speed selector (10) to the proper position for the record you are playing.
4. Lift the tone arm from the rest (12) and slowly move it over the record. The platter
will begin spinning.
5. Place the tone arm down onto the record in the location that you want to play.
6. Adjust the volume (7) to the desired level.
7. At the end of record, the platter will automatically stop spinning. Lift the tone arm
from the record and return it to the rest.
8. To stop playing manually, lift the tone arm from the record and return it to the rest.
NOTE:Some types of records may have an auto-stop area outside the preset limit, so the turntable may
stop before the last track finishes. In this case, set the AUTO-STOP switch (11) to the “OFF” position. This
allows the record to play to the end, but please note that it will not stop automatically. You must manually
raise the tone arm and place it back in the rest and then turn off the power to stop the turntable from
spinning.
TONE CONTROL
Rotate the TONE control knob to adjust the treble level of the music you are playing.
LINE-OUT CONNECTION
You can connect the system to your home stereo system, or an external HI-FI / amplifier system by
connecting the RCA line out socket (13) to the auxiliary input socket on your home stereo / HIFI / amplifier
system using RCA cables (not included).
LOCATION OF CONTROLS
OPERATIONS

STYLUS (NEEDLE) REPLACEMENT
Replacement of a worn stylus can be easily accomplished as follows.
1. Raise the "Tone Arm".
2. To remove stylus, pull out the stylus assembly in direction shown(1)(2),
holding the head shell with your other hand.
3. Then install the new stylus by pushing it gently into the cartridge(3)(4) (hold by
the sides to prevent damage to stylus) until it clicks into place.
When the stylus eventually needs replacing, a replacement stylus is
available for purchase directly from the manufacturer: www.groov-e.co.uk or call
[phone] for more information.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps
or motors.
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
•To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
•The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution
when cleaning and wiping the plastic parts.
•If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on
the cabinet.
•If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
SPECIFICATIONS
AC POWER AC 230V ~ 50Hz
TURNTABLE 33 1/3, 45 RPM
OUTPUT POWER 2 X 1W RMS
NOTE: Due to ERP stage two requirements and to protect the environment, the
unit will switch to standby mode automatically if no is music playing after 15
minutes.
INSTRUCTIONS ON ENVIRONMENT PROTECTION
DO NOT DISPOSE OF THIS PRODUCT IN THE USUAL HOUSEHOLD WASTE AT THE END OF ITS LIFECYCLE,
HAND IT OVER AT A COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC
APPLIANCES. THE SYMBOL ON THE PRODUCT, THE INSTRUCTIONS FOR USE OR THE PACKING WILL
INFORM THEM ABOUT THE METHODS FOR DISPOSAL. THE MATERIALS ARE RECYCLABLE AS INDICATED
BY THE SYMBOL ON THE LEFT.
BY RECYCLING, MATERIAL RECYCLING OR OTHER FORMS OF RE-UTILIZATION OF OLD APPLIANCES, YOU
ARE MAKING AN IMPORTANT CONTRIBUTION TO PROTECT OUR ENVIRONMENT. PLEASE CONTACT YOUR
LOCAL COUNCIL FOR THE AUTHORIZED DISPOSAL LOCATION AND RECYCLING FACILITIES.
Unit J, Braintree Road
Braintree Industrial Estate
Ruislip
Middlesex HA4 0EJ
UK
www.groov-e.co.uk