Grundfos SB User manual

SB, SBA
Installation and operating instructions
GRUNDFOS INSTRUCTIONS

SB, SBA
English (GB)
Installation and operating instructions ..................................5
Български (BG)
Упътване за монтаж и експлоатация.................................19
Čeština (CZ)
Montážní a provozní návod ........................................35
Deutsch (DE)
Montage- und Betriebsanleitung .....................................49
Dansk (DK)
Monterings- og driftsinstruktion ......................................65
Eesti (EE)
Paigaldus- ja kasutusjuhend........................................79
Español (ES)
Instrucciones de instalación y funcionamiento............................93
Suomi (FI)
Asennus- ja käyttöohjeet .........................................108
Français (FR)
Notice d'installation et de fonctionnement..............................122
Ελληνικά (GR)
Οδηγίες εγκατάστασης και λειτουργίας................................137
Hrvatski (HR)
Montažne i pogonske upute .......................................153
Magyar (HU)
Telepítési és üzemeltetési utasítás ..................................167
Italiano (IT)
Istruzioni di installazione e funzionamento .............................182
Lietuviškai (LT)
Įrengimo ir naudojimo instrukcija ....................................197
Latviešu (LV)
Uzstādīšanas un ekspluatācijas instrukcija .............................211
Nederlands (NL)
Installatie- en bedieningsinstructies ..................................227
Polski (PL)
Instrukcja montażu i eksploatacji....................................243
3
Table of contents

Português (PT)
Instruções de instalação e funcionamento .............................258
Română (RO)
Instrucţiuni de instalare şi utilizare...................................273
Srpski (RS)
Uputstvo za instalaciju i rad .......................................288
Русский (RU)
Паспорт, Руководство по монтажу и эксплуатации......................303
Svenska (SE)
Monterings- och driftsinstruktion ....................................318
Slovensko (SI)
Navodila za montažo in obratovanje .................................332
Slovenčina (SK)
Návod na montáž a prevádzku .....................................347
Türkçe (TR)
Montaj ve kullanım kılavuzu .......................................361
Українська (UA)
Інструкції з монтажу та експлуатації ................................375
Bosanski (BS)
Montažne i pogonske upute .......................................390
Macedonian (MK)
Упатства за монтирање и ракување ................................405
(AR) ةيبرعلا
    .............................................420
4SB, SBA
Table of contents

English (GB) Installation and operating instructions
Original installation and operating instructions
Table of contents
1. General Information ............. 5
1.1 Hazard statements .............. 5
1.2 Notes ..................... 6
2. Receiving the product............ 6
2.1 Inspecting the packaging ........... 6
2.2 Scope of delivery ............... 6
3. Installing the product ............ 6
3.1 Location .................... 6
3.2 Mechanical installation ............ 8
3.3 Pump position................. 8
3.4 Connecting the outlet hose or pipe ...... 9
3.5 Non-return valve for SB pumps........ 9
3.6 Electrical connection ............. 9
4. Starting up the product ...........10
4.1 SBA starting and stopping conditions ....10
5. Handling and storing the product .....11
5.1 Handling the product .............11
5.2 Storing the product ..............11
5.3 Frost protection ................11
6. Product introduction ............11
6.1 Product description ..............11
6.2 SB pumps ...................11
6.3 SBA pumps ..................11
6.4 SBA dry-running protection..........11
6.5 Intended use .................12
6.6 Pumped liquids ................12
6.7 Identification..................12
7. Maintaining the product...........13
8. Fault finding the product ..........14
8.1 The pump does not run. ...........14
8.2 The pump runs but gives no water.......15
8.3 The pump runs at reduced performance. ..15
8.4 Frequent starts and stops. ..........16
8.5 Leaking water from the drain holes......16
9. Technical data ................17
9.1 Operating conditions .............17
9.2 Mechanical data................17
9.3 Electrical data .................18
10. Further product information ........18
11. Disposing of the product ..........18
1. General Information
Read this document before you install the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not
be made by children without supervision.
1.1 Hazard statements
The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which, if
not avoided, could result in minor or
moderate personal injury.
The hazard statements are structured in the following
way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.
5
English (GB)

1.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explosion-
proof products.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.
2. Receiving the product
2.1 Inspecting the packaging
On receipt of the product, do the following:
1. Check that the product is as ordered. If the
product is not as ordered, contact the supplier.
2. Check that no visible parts have been damaged. If
any visible parts have been damaged, contact the
transport company.
2.2 Scope of delivery
The box contains the following items:
• 1 pump
• 1 adapter
• 1 installation and operating instructions
• 1 quick guide
• 1 floating inlet strainer, for side inlet variant only
• 1 non-return valve, for SB only.
3. Installing the product
Make sure that the system in which the
pump is incorporated is designed for the
maximum pump pressure.
This pump has been evaluated for use
with water only.
Observe local regulations concerning limits
for manual lifting or handling.
CAUTION
Crushing of feet
Minor or moderate personal injury
‐Use safety shoes when handling the
pump.
DANGER
Electric shock
Death or serious personal injury
‐Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
accidentally switched on.
3.1 Location
Install the pump in a frost-free location.
Before the pump is submerged in the well or tank,
make sure that the well or tank does not contain sand
or solid sediment.
Install the pipe so that the pump is not exposed to
mechanical stress.
3.1.1 Maximum installation depth
Read the label on the product.
Product Maximum installation depth
[m]
SB 10
SBA 10
6
English (GB)

3.1.2 Highest tapping point for SBA pumps
Install SBA pumps so that the height between the
pump and the highest tapping point does not exceed
these values:
SBA 3-35: 13 m.
SBA 3-45: 20 m.
Max.
13 m/43 ft
Max.
20 m/66ft
SBA 3-35 SBA 3-45
TM067648
Highest tapping point for SBA
Related information
8.4 Frequent starts and stops.
3.1.3 Minimum space
Pumps installed with a float switch require a free
space between the float switch and the wall to ensure
free movability.
Pumps with side inlet require a free space between
the floating inlet strainer and the wall.
If you install the pump in a well or tank, the minimum
free space must be as shown in the figure below.
Pumps installed without a float switch require a space
that corresponds to the physical dimensions of the
pump.
SB and SBA pump with a float switch and side
inlet
TM082302
Minimum space for SB and SBA pump in a well or
tank
7
English (GB)

3.1.4 Adjustment of the float switch
To make sure that the float switch can start and stop
the pump, adjust the start and stop level by changing
the free cable length between the float switch and the
lifting handle.
A reduced free cable length results in more starts and
stops and a small difference in level. The minimum
free cable length is 10-18 cm. See fig. Minimum free
cable length for float switch.
• An increased free cable length results in fewer
starts and stops and a large difference in level.
Make sure that the float switch can move freely.
Make sure that the stop level does not fall below the
pump inlet strainer.
TM082305
Minimum free cable length for float switch
3.2 Mechanical installation
3.2.1 Lifting the product
Lift the pump by the lifting handle. Never lift the pump
by the power cable. Tie a rope to the lifting handle or
lifting eye instead.
Do not lift the product by the power cable.
Lift the product by means of a rope.
TM071402
Lifting the pump
Related information
3.3.1 Pump position of SB and SBA
3.3 Pump position
3.3.1 Pump position of SB and SBA
Use the pump in the vertical position as shown in fig.
Position of SB, SBA pumps.
TM082310
Position of SB, SBA pumps
Related information
3.2.1 Lifting the product
8
English (GB)

3.4 Connecting the outlet hose or pipe
Product External pipe thread
[inch]
SB G 3/4" or 1"
SBA G 3/4" or 1"
The outlet hose or pipe can be connected to the
pump outlet port by means of an adapter. You can
also connect a pipe directly to the pump outlet.
SB and SBA pumps include an adapter. Cut off the
adapter so that it matches the outlet port diameter.
TM082301 TM082365
3.5 Non-return valve for SB pumps
Connect the non-return valve to the SB pump outlet.
The non-return valve has G 1" threads for connection
to the adapter or the pipe.
TM082297
Non-return valve
3.6 Electrical connection
DANGER
Electric shock
Death or serious personal injury
‐Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
accidentally switched on.
‐The pump must be earthed.
DANGER
Electric shock
Death or serious personal injury
‐The protective earth of the socket
outlet must be connected to the
protective earth of the pump. The plug
must therefore have the same PE
connection system as that of the
socket outlet. If not, use a suitable
adapter.
We recommend that you fit the permanent
installation with a residual-current circuit
breaker, RCCB, with a tripping current less
than 30 mA.
DANGER
Electric shock
Death or serious personal injury
‐If the pump is used for cleaning or
other maintenance of swimming pools,
garden ponds or similar places, make
sure that the pump is supplied through
a residual-current circuit breaker,
RCCB, with a tripping current of 30
mA.
DANGER
Electric shock
Death or serious personal injury
‐Connect pumps that are delivered
without cable and/or plugs to an
external main switch with a minimum
contact gap of 3 mm in all poles.
Make sure that there is at least 3 m free
cable above the liquid level.
Check that the supply voltage and frequency
correspond to the values stated on the pump
nameplate.
The electrical connection must be carried out by an
authorised electrician in accordance with local
regulations.
9
English (GB)

3.6.1 Thermal protection
The pump has a built-in thermal switch and requires
no additional motor protection. If the pump is running
without water, or if it is otherwise overloaded, the
built-in thermal switch will cut out. When the motor
has cooled to normal temperature, it will restart
automatically.
3.6.2 Connecting to external controller
SB
SB pumps must be connected to an external
controller. We recommend a Grundfos Pressure
Manager: net.grundfos.com/qr/i/97506325
SBA
SBA pumps have an integrated control unit.
Related information
6.2 SB pumps
6.3 SBA pumps
3.6.3 Power supply failure
In case of a power supply failure, the pump restarts
automatically when power returns and runs for at
least 10 s.
4. Starting up the product
WARNING
Flammable material
Death or serious personal injury
‐Do not use the pump for flammable
liquids, such as diesel oil, petrol or
similar liquids.
DANGER
Electric shock
Death or serious personal injury
‐Do not use the pump in swimming
pools, garden ponds or similar places if
there are people in the water.
1. Open a tap in the system.
2. Switch on the power supply.
3. Check that the pump is running and water is
coming out of the tap.
4. Check that the pump is running and pressure is
being built up in the system.
5. Close the tap.
6. Check that pressure has been built up in the
system.
7. Check that the pump stops after 10 seconds.
Water is accumulated between the motor
housing and cover during submersion.
When the pump is stopped and lifted from
a submerged position, so the drain holes
are above water level, the water is drained
from the drain holes located under the red
ring.
TM083090
Connect SB pumps to an external
controller.
Related information
8.5 Leaking water from the drain holes
4.1 SBA starting and stopping conditions
When water is consumed in the water supply system,
the pump starts when the starting conditions are
fulfilled. This happens for example when a tap is
opened which makes the pressure in the system
drop. The control unit stops the pump again when
consumption stops, that is when the tap is closed.
Starting conditions
The pump starts when one of the following conditions
is fulfilled:
• The flow rate is higher than the minimum flow
rate.
• The pressure is lower than the start pressure.
Stopping conditions
The pump stops with a time delay of 10 s when the
flow rate is lower than the minimum flow rate.
The start pressure and minimum flow rate values are
shown in sections Pressure and Flow rate.
10
English (GB)

Automatic restart of SBA pumps
SBA pump models with a float switch automatically
restart when water is added. Models without a float
switch will attempt to restart every 24 hours.
Related information
9.1.1 Flow rate
9.1.4 Pressure
5. Handling and storing the product
5.1 Handling the product
Do not lift the product by the power cable.
Lift the product by means of a rope.
Do not drop or shake the product.
5.2 Storing the product
Store the product indoors in a dry and dust-free
environment. Protect the product from vibrations.
Storage temperature: -10 to +40 °C.
5.3 Frost protection
It the pump is not used during periods of frost, drain
the pump and the pipe system before you take the
pump out of operation.
6. Product introduction
6.1 Product description
The pumps are submersible booster pumps available
in two main versions:
• pump with integrated inlet strainer with 1 mm
mesh
• pump with side inlet, which includes a flexible inlet
hose with floating inlet strainer with 1.8 mm mesh.
Both versions are available with or without float
switch. The float switch can be used for automatic
operation or dry-running protection of the pump.
6.2 SB pumps
The SB submersible booster pump is available with
integrated inlet strainer or floating inlet strainer. The
SB pump must be connected to an external controller,
see section Connecting to external controller.
Related information
3.6.2 Connecting to external controller
6.3 SBA pumps
The SBA pump is a complete submersible booster
pump available with integrated inlet strainer or
floating inlet strainer.
SBA has a built-in control unit, eliminating the need
for a controller.
The pump has built-in protection against overheating.
Related information
3.6.2 Connecting to external controller
6.4 SBA dry-running protection
The built-in control unit incorporates dry-running
protection that automatically stops the pump in case
of dry running.
The dry-running protection functions differently during
priming and operation.
11
English (GB)

6.4.1 Dry running during priming
If the control unit does not detect any pressure and
flow within 5 min after it has been connected to a
power supply and the pump has started, the dry-
running function is activated and the pump stops.
6.4.2 Dry running during operation
If the control unit does not detect any pressure and
flow within 40 s during normal operation, the dry-
running function is activated and the pump stops.
6.4.3 Resetting of dry-running alarm
If a dry-running alarm has been activated, you can
restart the pump manually by switching off the power
supply, wait for 2 min and reconnect power. If the
control unit does not detect any pressure and flow
within 40 s after restarting, the dry-running alarm is
reactivated.
6.5 Intended use
Grundfos SB and SBA pumps are designed for
pumping clean water. The pumps are especially
suitable for rainwater applications and small private
wells.
Typical applications:
• traditional wells
• shallow wells
• rainwater collection in tanks
• boosting of public water
• emptying of garden ponds
• irrigation.
6.6 Pumped liquids
The pumps are designed for fresh water with a
maximum chloride content of 300 ppm and a free
chlorine content below 1 ppm.
The product is suitable for pumping clean, thin, non-
aggressive and non-explosive liquids without solid
particles or fibres.
The pumps are not suitable for these liquids:
• liquids containing long fibres
• inflammable liquids (oil, petrol, etc.)
• aggressive liquids.
6.7 Identification
6.7.1 Nameplate
Type
Model
1×220
Qmax
Made in Italy by Grundfos
SB 5-50 A
9xxxxxxx
V~ 60Hz P2
130 l/m Hmax
P10 3.1810 SN100001
1.5 HP
UI1/1 7.6 A
50m Tmax 40°C 15m
IP68Insulation Class F
DK - 8850 Bjerringbro, Denmark
1 2
14 13 12 11 10
3 4 5
17
16
15
6
7
8
9
TM071530
Example of nameplate
Pos. Description
1 Product type
2 Frequency [Hz]
3 Production code (year and week)
450 Hz, P1: Power input [W]
60 Hz, P2: Motor output [HP]
5 Serial number
6 Full-load current [A]
7 Max. installation depth [m]
8 Max. liquid temperature [°C]
9 Enclosure class
10 Manufacturer
11 Motor insulation class
12 Max. head [m]
13 Country of origin
14 Approval marks
15 Max. flow rate [l/min]
16 Supply voltage [V]
17 Product number
12
English (GB)

7. Maintaining the product
DANGER
Electric shock
Death or serious personal injury
‐If the power supply cable is damaged,
it must be replaced by the
manufacturer, his service agent or
similarly qualified persons in order to
avoid hazard.
Clean the strainer every fall with a brush and a water
jet when needed. In normal operation, the pump does
not require any specific maintenance.
13
English (GB)

8. Fault finding the product
DANGER
Electric shock
Death or serious personal injury
‐Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
accidentally switched on.
See also the quick guide.
8.1 The pump does not run.
Cause Remedy
The fuses in the electrical installation are blown. Replace the fuses. If the new fuses blow too, check the
electrical installation and the power cable.
The residual-current circuit breaker, RCCB, has
tripped.
Cut in the circuit breaker.
No power supply. Contact the power supply company.
The motor protection has cut off the power supply
due to overload.
Check if the pump is blocked.
1. Switch off the power supply to the pump.
2. Remove the rubber plug.
3. Try to turn the pump shaft with a screwdriver.
4. If the pump shaft is stuck, follow the instructions
below in The pump is blocked.
Note: Remember to refit the rubber plug.
The pump or the power cable is defective. Repair or replace the pump or cable.
The float switch is in dry-running position. Check the water level and the float switch for free
movability.
Note: If the tank is empty, and the float switch is often in
this position, install a larger tank.
SBA: The dry-running protection of the pump has
stopped the pump.
Check the water level.
Switch off the power supply and wait 2 min before
switching it back on.
The pump is blocked. Check and clean the pump.
1. Switch off the power supply to the pump.
2. Remove the screws at the bottom of the pump with
a cross-head screwdriver.
3. Remove the pump base.
4. Clean the inlet strainer and hydraulic parts with a
brush and a water jet.
5. Reassemble the pump.
14
English (GB)

8.2 The pump runs but gives no water.
Cause Remedy
The outlet valve is closed. Open the valve.
No water or too low water level in the tank. Increase the installation depth of the pump. Reduce the
pump performance, or replace the pump by a pump with
a lower performance.
The non-return valve is stuck in its closed position. Pull out the pump, and clean or replace the valve.
The inlet strainer is clogged. Pull out the pump, and clean the inlet strainer with a
brush and a water jet.
The pump is defective. Repair or replace the pump.
8.3 The pump runs at reduced performance.
Cause Remedy
The valves in the outlet pipe are partly closed or
blocked.
Check and clean or replace the valves.
The outlet pipe is partly blocked by impurities. Clean or replace the pipe.
The non-return valve in the outlet pipe is partly
blocked.
Clean or replace the valve.
The pump and outlet pipe are partly blocked by
impurities.
Pull out the pump. Check and clean or replace the
pump. Clean the pipes.
The inlet strainer is clogged. Clean the inlet strainer.
The pump is defective. Repair or replace the pump.
Leakage in the pipes. Check and repair the pipes.
The outlet pipe is defective. Replace the outlet pipe.
Undervoltage has occurred. Check the power supply.
15
English (GB)

8.4 Frequent starts and stops.
Cause Remedy
The float switch has not been adjusted correctly. Adjust the float switch to ensure suitable time between
the cutting-in and cutting-out of the pump.
The non-return valve is leaking or stuck half-open. Clean or replace the non-return valve.
The supply voltage is unstable. Check the power supply.
The motor temperature is too high. Check the water temperature.
The pump is blocked. Check and clean the pump.
1. Switch off the power supply to the pump.
2. Remove the screws at the bottom of the pump with
a cross-head screwdriver.
3. Remove the pump base.
4. Clean the inlet strainer and hydraulic parts with a
brush and a water jet.
5. Reassemble the pump.
Leakage in the pipes. Check and repair the pipes.
Related information
3.1.2 Highest tapping point for SBA pumps
8.5 Leaking water from the drain holes
Cause Remedy
The water is drained from the drain holes
located under the red ring when the pump is stopped
and the drain holes are above water level.
• This is normal behaviour.
Related information
4. Starting up the product
16
English (GB)

9. Technical data
9.1 Operating conditions
9.1.1 Flow rate
Max. flow rate [m3/h]
SB 3
SBA 3
Min. flow rate [l/min]
SBA 3-35 1.0
SBA 3-45 1.0
Related information
4.1 SBA starting and stopping conditions
9.1.2 Max. head
[m]
SB 3-35 35
SB 3-45 45
SBA 3-35 35
SBA 3-45 45
9.1.3 Temperature
Liquid temperature [°C]
SB 0 to 40
SBA 0 to 40
Storage temperature [°C]
SB -10 to +40
SBA -10 to +40
9.1.4 Pressure
Start pressure [bar] [MPa]
SBA 3-35 1.5 0.15
SBA 3-45 2.4 0.22
Related information
4.1 SBA starting and stopping conditions
9.1.5 Frequency of starts and stops
Maximum starts per hour
SB 20
SBA 20
9.2 Mechanical data
Cable length [m]
SB 15
SBA 15
Maximum installation depth [m]
SB 10
SBA 10
Protection class
Enclosure class IP68
Insulation class F
17
English (GB)

9.3 Electrical data
SB Voltage [V] Frequency [Hz] P1 P2 I1/1
[A]
[kW] [kW]
3-35 1 × 230 50 0.70 0.47 3.35
3-45 0.80 0.55 3.60
3-35 1 × 115
60
0.66 0.45 6.30
3-45 0.85 0.62 7.70
3-35 1 × 230 0.70 0.48 2.70
3-45 0.76 0.57 3.40
SBA Voltage [V] Frequency [Hz] P1 P2 I1/1
[A]
[kW] [kW]
3-35 1 × 230 50 0.72 0.47 3.3
3-45 0.78 0.55 3.6
3-35 1 × 115
60
0.66 0.45 6.4
3-45 0.84 0.62 7.8
3-35 1 × 230 0.70 0.47 3.3
3-45 0.76 0.57 3.4
9.3.1 Speed
Speed 50 Hz
[min-1]
60 Hz
[min-1]
SB 2800 3400
SBA 2800 3400
10. Further product information
For further product documentation, see product-
selection.grundfos.com.
11. Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin
symbol on a product means
that it must be disposed of
separately from household
waste. When a product
marked with this symbol
reaches its end of life, take it
to a collection point
designated by the local waste
disposal authorities. The
separate collection and
recycling of such products will
help protect the environment
and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.
18
English (GB)

Argentina
Bombas GRUNDFOS de Argentina S.A.
Ruta Panamericana km. 37.500industin
1619 - Garín Pcia. de B.A.
Tel.: [phone]
Fax: [phone]
Australia
GRUNDFOS Pumps Pty. Ltd.
P.O. Box 2040
Regency Park
South Australia 5942
Tel.: [phone]
Fax: [phone]
Austria
GRUNDFOS Pumpen Vertrieb
Ges.m.b.H.
Grundfosstraße 2
A-5082 Grödig/Salzburg
Tel.: [phone]
Fax: [phone]
Belgium
N.V. GRUNDFOS Bellux S.A.
Boomsesteenweg 81-83
B-2630 Aartselaar
Tel.: [phone]
Fax: [phone]
Belarus
Представительство ГРУНДФОС в
Минске
220125, Минск
ул. Шафарнянская, 11, оф. 56, БЦ
«Порт»
Тел.: [phone]
[phone]
Факс: [phone]
E-mail: [email protected]
Bosnia and Herzegovina
GRUNDFOS Sarajevo
Zmaja od Bosne 7-7A
BiH-71000 Sarajevo
Tel.: [phone]
Fax: [phone]
www.ba.grundfos.com
E-mail: [email protected]
Brazil
BOMBAS GRUNDFOS DO BRASIL
Av. Humberto de Alencar Castelo
Branco, 630
CEP 09850 - 300
São Bernardo do Campo - SP
Tel.: [phone]
Fax: [phone]
Bulgaria
Grundfos Bulgaria EOOD
Slatina District
Iztochna Tangenta street no. 100
BG - 1592 Sofia
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
Canada
GRUNDFOS Canada inc.
2941 Brighton Road
Oakville, Ontario
L6H 6C9
Tel.: [phone]
Fax: [phone]
China
GRUNDFOS Pumps (Shanghai) Co. Ltd.
10F The Hub, No. 33 Suhong Road
Minhang District
Shanghai 201106 PRC
Tel.: [phone]
Fax: [phone]
Columbia
GRUNDFOS Colombia S.A.S.
Km 1.5 vía Siberia-Cota Conj. Potrero
Chico,
Parque Empresarial Arcos de Cota Bod.
1A.
Cota, Cundinamarca
Tel.: [phone]
Fax: [phone]
Croatia
GRUNDFOS CROATIA d.o.o.
Buzinski prilaz 38, Buzin
HR-10010 Zagreb
Tel.: [phone]
Fax: [phone]
www.hr.grundfos.com
Czech Republic
GRUNDFOS Sales Czechia and Slovakia
s.r.o.
Čajkovského 21
779 00 Olomouc
Tel.: [phone]
Denmark
GRUNDFOS DK A/S
Martin Bachs Vej 3
DK-8850 Bjerringbro
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
www.grundfos.com/DK
Estonia
GRUNDFOS Pumps Eesti OÜ
Peterburi tee 92G
11415 Tallinn
Tel.: + 372 606 1690
Fax: + 372 606 1691
Finland
OY GRUNDFOS Pumput AB
Trukkikuja 1
FI-01360 Vantaa
Tel.: [phone]
France
Pompes GRUNDFOS Distribution S.A.
Parc d’Activités de Chesnes
57, rue de Malacombe
F-38290 St. Quentin Fallavier (Lyon)
Tel.: [phone]
Fax: [phone]
Germany
GRUNDFOS GMBH
Schlüterstr. 33
40699 Erkrath
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
Service in Deutschland:
[email protected]
Greece
GRUNDFOS Hellas A.E.B.E.
20th km. Athinon-Markopoulou Av.
P.O. Box 71
GR-19002 Peania
Tel.: [phone]
Fax: [phone]
Hong Kong
GRUNDFOS Pumps (Hong Kong) Ltd.
Unit 1, Ground floor, Siu Wai industrial
Centre
29-33 Wing Hong Street & 68 King Lam
Street, Cheung Sha Wan
Kowloon
Tel.: [phone]
Fax: [phone]
Hungary
GRUNDFOS Hungária Kft.
Tópark u. 8
H-2045 Törökbálint
Tel.: [phone]
Fax: [phone]
India
GRUNDFOS Pumps india Private Limited
118 Old Mahabalipuram Road
Thoraipakkam
Chennai 600 097
Tel.: [phone]
Indonesia
PT GRUNDFOS Pompa
Graha intirub Lt. 2 & 3
Jln. Cililitan Besar No.454. Makasar,
Jakarta Timur
ID-Jakarta 13650
Tel.: [phone]
Fax: [phone]
Ireland
GRUNDFOS (Ireland) Ltd.
Unit A, Merrywell Business Park
Ballymount Road Lower
Dublin 12
Tel.: [phone]
Fax: [phone]
Italy
GRUNDFOS Pompe Italia S.r.l.
Via Gran Sasso 4
I-20060 Truccazzano (Milano)
Tel.: [phone]
Fax: [phone]
Japan
GRUNDFOS Pumps K.K.
1-2-3, Shin-Miyakoda, Kita-ku
Hamamatsu
431-2103 Japan
Tel.: [phone]
Fax: [phone]
Korea
GRUNDFOS Pumps Korea Ltd.
6th Floor, Aju Building 679-5
Yeoksam-dong, Kangnam-ku, 135-916
Seoul, Korea
Tel.: [phone]
Fax: [phone]
Grundfos companies

Latvia
SIA GRUNDFOS Pumps Latvia
Deglava biznesa centrs
Augusta Deglava ielā 60
LV-1035, Rīga,
Tel.: + 371 714 9640, 7 149 641
Fax: + 371 914 9646
Lithuania
GRUNDFOS Pumps UAB
Smolensko g. 6
LT-03201 Vilnius
Tel.: + 370 52 395 430
Fax: + 370 52 395 431
Malaysia
GRUNDFOS Pumps Sdn. Bhd.
7 Jalan Peguam U1/25
Glenmarie industrial Park
40150 Shah Alam, Selangor
Tel.: [phone]
Fax: [phone]
Mexico
Bombas GRUNDFOS de México
S.A. de C.V.
Boulevard TLC No. 15
Parque industrial Stiva Aeropuerto
Apodaca, N.L. 66600
Tel.: [phone]
Fax: [phone]
Netherlands
GRUNDFOS Netherlands
Veluwezoom 35
1326 AE Almere
Postbus 22015
1302 CA ALMERE
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
New Zealand
GRUNDFOS Pumps NZ Ltd.
17 Beatrice Tinsley Crescent
North Harbour Industrial Estate
Albany, Auckland
Tel.: [phone]
Fax: [phone]
Norway
GRUNDFOS Pumper A/S
Strømsveien 344
Postboks 235, Leirdal
N-1011 Oslo
Tel.: [phone]
Fax: [phone]
Poland
GRUNDFOS Pompy Sp. z o.o.
ul. Klonowa 23
Baranowo k. Poznania
PL-62-081 Przeźmierowo
Tel.: [phone]
Fax: [phone]
Portugal
Bombas GRUNDFOS Portugal, S.A.
Rua Calvet de Magalhães, 241
Apartado 1079
P-2770-153 Paço de Arcos
Tel.: [phone]
Fax: [phone]
Romania
GRUNDFOS Pompe România SRL
S-PARK BUSINESS CENTER, Clădirea
A2, etaj 2
Str. Tipografilor, Nr. 11-15, Sector 1, Cod
013714
Bucuresti, Romania
Tel.: [phone]
E-mail: [email protected]
Russia
ООО Грундфос Россия
ул. Школьная, 39-41
Москва, RU-109544, Russia
Тел. [phone] [phone]
Факс [phone]
E-mail [email protected]
Serbia
Grundfos Srbija d.o.o.
Omladinskih brigada 90b
11070 Novi Beograd
Tel.: [phone]
Fax: [phone]
www.rs.grundfos.com
Singapore
GRUNDFOS (Singapore) Pte. Ltd.
25 Jalan Tukang
Singapore 619264
Tel.: [phone]
Faxax: [phone]
Slovakia
GRUNDFOS s.r.o.
Prievozská 4D 821 09 BRATISLAVA
Tel.: [phone]
sk.grundfos.com
Slovenia
GRUNDFOS LJUBLJANA, d.o.o.
Leskoškova 9e, 1122 Ljubljana
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
South Africa
GRUNDFOS (PTY) LTD
16 Lascelles Drive, Meadowbrook Estate
1609 Germiston, Johannesburg
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
Spain
Bombas GRUNDFOS España S.A.
Camino de la Fuentecilla, s/n
E-28110 Algete (Madrid)
Tel.: [phone]
Fax: [phone]
Sweden
GRUNDFOS AB
Box 333 (Lunnagårdsgatan 6)
431 24 Mölndal
Tel.: [phone]
Fax: [phone]
Switzerland
GRUNDFOS Pumpen AG
Bruggacherstrasse 10
CH-8117 Fällanden/ZH
Tel.: [phone]
Fax: [phone]
Taiwan
GRUNDFOS Pumps (Taiwan) Ltd.
7 Floor, 219 Min-Chuan Road
Taichung, Taiwan, R.O.C.
Tel.: [phone]
Fax: [phone]
Thailand
GRUNDFOS (Thailand) Ltd.
92 Chaloem Phrakiat Rama 9 Road
Dokmai, Pravej, Bangkok 10250
Tel.: [phone]
Fax: [phone]
Turkey
GRUNDFOS POMPA San. ve Tic. Ltd.
Sti.
Gebze Organize Sanayi Bölgesi
Ihsan dede Caddesi
2. yol 200. Sokak No. 204
41490 Gebze/ Kocaeli
Tel.: +90 - 262-679 7979
Fax: +90 - 262-679 7905
E-mail: [email protected]
Ukraine
ТОВ "ГРУНДФОС УКРАЇНА"
Бізнес Центр Європа
Столичне шосе, 103
м. Київ, 03131, Україна
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
United Arab Emirates
GRUNDFOS Gulf Distribution
P.O. Box 16768
Jebel Ali Free Zone, Dubai
Tel.: [phone]
Fax: [phone]
United Kingdom
GRUNDFOS Pumps Ltd.
Grovebury Road
Leighton Buzzard/Beds. LU7 4TL
Tel.: [phone]
Fax: [phone]
U.S.A.
Global Headquarters for WU
856 Koomey Road
Brookshire, Texas 77423 USA
Phone: [phone]
Uzbekistan
Grundfos Tashkent, Uzbekistan
The Representative Office of Grundfos
Kazakhstan in Uzbekistan
38a, Oybek street, Tashkent
Tel.: [phone]
Fax: [phone]
Grundfos companies