Grundig MS 5840 User manual

MAN SHAVER
MS 5840

2
------------------------------------------------------------------------------------------------------------------------------------------------------------------
A
LK
B
C
D
E
H
I
J
G
F

3
------------------------------------------------------------------------------------------------------------------------------------------------------------------
TÜRKÇE ??-??
DEUTSCH 4-13
ENGLISH 14-22
FRANÇAIS 23-31
PORTUGUÊS 32-40
ESPAÑOL 41-49
POLSKI 50-58
ČESKY 59-67
MAGYAR 68-76
TÜRKÇE 77-85
ΕΛΛΗΝΙΚΑ 86-94

14
SAFETY ------------------------------------------------------------------------------------------------------------------------------------
ENGLISH
Please note the following instruc-
tions when using the appliance:
7This appliance is designed for
domestic use only.
7This appliance is designed
solely for trimming human facial
hair. Any other use is expressly
prohibited.
7When the appliance is being
charged, on no account should
it come into contact with water
or any other liquid.
7After charging, pull out the
power supply unit.
7Caution! Always keep the
power adapter dry.
7Never use the appliance if it, the
cutting foils or the blade blocks
are visibly damaged.
7Do not completely immerse the
appliance in water.
7The appliance may only come
into contact with water once it is
disconnected from the power
supply unit and the power sup-
ply unit is no longer in the
socket.
7Do not drop the appliance.
7Keep the appliance out of the
reach of children.
7Do not open the appliance
under any circumstances. No
warranty claims are accepted
for damage caused by improper
handling.

ENGLISH 15
OVERVIEW ----------------------------------------------------------------------------------------------------------------------
Dear customer,
Congratulations on the purchase
of your MS 5840 men’s shaver.
Read the following user notes care-
fully to ensure you can enjoy your
quality product from Grundig for
many years to come.
Special features
– Triple cutting system (foil –
blade – foil) with extendable
long-hair trimmer for thorough
removal of all facial hair.
– The cutting system can be
cleaned with water.
– The power supply unit adjusts its
voltage automatically for use
anywhere in the world.
Controls
See the illustrations on page 2.
Protective cap.
Triple cutting system (foil–
trimmer – foil).
B
A
Extendable trimmer.
Side lock buttons for
removing the foil frame.
Detachable blade blocks.
Oscillator/holder for mount-
ing blade blocks.
Housing frame for insertion
of foil frame.
Switch for turning on and
off.
Charge indicator. Lights up
red when charging and
green when it is fully
charged.
Power cord socket.
Accessories
Power supply unit.
Cleaning brush.
Storage bag.
M
L
K
J
I
H
G
F
E
D
C

16
POWER SUPPLY----------------------------------------------------------------------------------------------------
ENGLISH
Rechargeable battery
operation
When operating the appliance
with the built-in nickel metal
hydride battery, only use the
power unit supplied for charging.
The power unit has an automatic
100 - 240 V, 50/60 Hz trans-
former which works anywhere in
the world. This allows it to adjust to
all international AC voltages.
1Press the button to switch off
the appliance.
2Plug the power cord into the
appliance socket and the
power supply unit into the wall
socket.
– During the charging process,
the indicator lights up red.
– When the appliance is fully
charged, the indicator
lights up green.
3Pull the power cord out of the
the appliance socket and the
power supply unit out of the wall
socket.
J
I
I
J
H
Notes
7Charge up the batteries com-
pletely (about 7 hours) before
you first use them or if you have
not used them for a long time.
7The ambient temperature should
be between 5 °C and 40 °C.
7If you switch on the appliance
while it is charging, charging
will be interrupted.
7When fully charged, the appli-
ance works for around 70 to 80
minutes. It is not advisable to
charge the batteries after each
use. Generally, you should only
charge the batteries when they
are completely discharged. This
increases their service life. Do
not charge them every day.

ENGLISH 17
USE --------------------------------------------------------------------------------------------------------------------------------------------------
Shaving
1Remove the plastic protective
cap .
Caution
7The foils and blade blocks may
not be damaged. Replace any
damaged parts before shaving.
2Press the button to switch on
the appliance.
3Shave with slow, gentle move-
ments against the direction of
beard growth. Hold the appli-
ance at a 90° angle to your
skin. Make sure both foils touch
the skin.
Caution
7Do not press too hard as you
may damage the foils.
4After use, switch off the appli-
ance with the switch and put
the plastic cap back on.
H
H
A
Trimming
Use the extended trimmer for
longer hair on your face and neck,
but also on the beard, moustache
or sideburns.
1Press the button to switch on
the appliance.
2Push up the trimmer until it
latches in.
3After use, push the trimmer
back down.
C
C
H

18
USE --------------------------------------------------------------------------------------------------------------------------------------------------
ENGLISH
Useful tips
7Always pull the skin taut when
shaving difficult areas such as
your lower jaw.
7Always cut against the natural
direction of beard growth.
7In the case of thick or copious
beard growth which cannot be
removed by just one shave, do
one quick shave and then a
more thorough second one.

ENGLISH 19
CLEANING AND CARE ----------------------------------------------------------------------------
General information
The device must be cleaned
regularly so that you can continue
to enjoy its top performance and
optimum results. Clean the housing
with a soft cloth and a mild
detergent. Do not use any
cleaning agents.
Cleaning with water
1Press the button to switch off
the device.
2Press the side lock buttons
and remove the foil frame.
3Rinse out the foil frame under
running water.
4To remove all hairs, hold the
blade blocks under running
water and switch on the appli-
ance.
E
B
D
H
Caution
7The appliance must be discon-
nected from the power unit.
5Press the button to switch off
the device after rinsing.
6Gently shake out the remaining
moisture and then dry off the
device with a clean cloth.
7Replace the foil frame and let
it latch into place.
B
H

20
CLEANING AND CARE ----------------------------------------------------------------------------
ENGLISH
Cleaning with the brush
1Turn the appliance off and
remove the foil frame . To do
so, press the side lock buttons
.
2Remove the blade blocks for
cleaning by pulling them
upwards off the oscillator .
3Carefully brush hair clippings
out of the blade blocks, the foils
and the housing.
Caution
7The foils can be irreparably
damaged during cleaning. Only
press very gently.
4Put all parts on again after
cleaning.
Caution
7To ensure smooth operation, the
foil frame must sit exactly in the
housing. Never take the foils out
of the frame.
F
E
D
B
Storage
If you do not want to use the appli-
ance for a long period of time,
please store it carefully.
1The appliance must be switched
off and completely dry.
2Store the appliance in the origi-
nal storage bag in a cool, dry
place.
3Make sure the appliance is kept
out of reach of children.
Replacing the foil frames
and blade blocks
You can replace the foil frame and
the blade blocks. The appropriate
replacement shaving system (con-
taining two blade blocks and one
foil frame) is article number
MSR 58. Ask your specialist
dealer about it.

ENGLISH 21
CLEANING AND CARE ----------------------------------------------------------------------------
Replacing the foil frames
1Remove the foil frame . To do
so, press the side lock buttons
.
2Fix the new foil frame in the
housing.
Caution
7Ensure that the foil frame is
firmly in position and cannot
move within the housing.
Replacing the blade blocks
1Remove the blade blocks by
pulling them upwards off the os-
cillator .
2Place the new blade blocks on
the oscillator.
F
E
D
B
Caution
7Ensure that the blade blocks are
firmly in position on the holder.
Note
7For an optimum shaving experi-
ence, always replace foil frames
and blade blocks at the same
time.

22 ENGLISH
Technical and design modifica-
tions are reserved.
INFORMATION ------------------------------------------------------------------------------------------------------
Environmental note
This product is manufactured from
high-quality parts and materials
which can be reused and
recycled.
Therefore, do not dispose of the
product along with normal house-
hold waste at the end of its service
life. Take it to a collection point for
the recycling of electrical and elec-
tronic equipment. This is indicated
by this symbol on the product, in
the operating manual and on the
packaging.
Please find out about collection
points operated by your local
authority.
Help protect the environment by
recycling used products.
Technical data
This product conforms
to the European direc-
tives 2004/108/EC
and 2006/95/EC.
Power supply
Batteries: Nickel metal hydride
Power adapter
Washable (IPX4)
Ni-MH

Grundig Multimedia B.V.
Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com