Grundig 40 L User manual

LADY SHAVER WASHABLE
LS 7140
DE
NO
EN
NL
ES
PL
FR
PT
IT
TR
SV
EL

3
_________________________________________________________
KJ
H
G
A
B
C
D
E
F
I

16ENGLISH
SAFETY _________________________________
Please note the following instructions
when using the appliance:
7 This appliance is designed for do-
mestic use only.
7 This appliance is designed solely
for shaving human body hair. Any
other use is expressly prohibited.
7 When the appliance is being
charged, on no account should it
come into contact with water or
any other liquid.
7 Never use the appliance if it, the
blade foil or the shaving head are
visibly damaged.
7 Only use the SW-030100EUL
power supply unit provided.
7 Caution! Always keep the power
adapter dry.
7 The appliance may only come into
contact with water once it is dis-
connected from the power supply
unit and the power supply unit is
no longer in the socket.
7 Do not drop the appliance.
7 This appliance can be used by
children aged from 8 years and
above and persons with re duced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Chil dren
shall not play with the appliance.
Clean ing and user maintenance
shall not be made by children
without supervision.
7 Do not open the appliance under
any circumstances. No warranty
claims are accepted for damage
caused by improper handling.

17 ENGLISH
OVERVIEW ____________________________
Dear customer,
Congratulations on the purchase of
your new GRUNDIG Lady Shaver
LS 7140.
Please read the following user notes
carefully to ensure you can enjoy your
quality GRUNDIG product for many
years to come.
Special features
7 Anti-bacterial titanium foil with two
longhair side trimmers for effective
protection against skin irritations
7 The lady shaver is designed to
remove unwanted hair on arms,
legs and also in especially sensitive
areas such as the bikini line, armpits
or the face
7 The lady shaver can be used on
wet skin
7 The cutting system can be cleaned
in water when removed.
7 Attachment comb for 5 mm trimming
length
A responsible approach!
GRUNDIG focusses on
contractually agreed so-
cial working conditions
with fair wages for both
internal employees and
suppliers, as well as on the efficient
use of raw materials with continual
waste reduction of several tonnes of
plastic each year – and availability of
at least 5 years for all accessories.
For a future worth living.
For a good reason. Grundig.
Controls
See the illustrations on page 3.
A Cutting system (shaving foil with two
side trimmers)
B Shaving head
C Release buttons
D Switch for turning on and off
E Charging indicator light
F Power cord socket
G Protective cap
Accessories
H Hanging holder
I Trimming comb (5 mm)
J Power supply unit
K Cleaning brush

18ENGLISH
OPERATION ___________________________
Note
7 The appliance can be used on wet
skin in battery mode and cleaned
under the tap.
Rechargeable battery
operation
When operating the appliance with
the built-in nickel metal hydride battery,
only use the power supply unit J sup-
plied for charging.
Check if the type plate on the power
supply unit J corresponds to your
local mains supply.
1 Press the switch D, then push the
switch D downwards to turn off the
appliance.
2 Plug the power supply unit J into
the wall socket first and then the
power cord into the power cord
socket F.
– During the charging process, the
charging indicator light E lights
up blue.
– Once the appliance is fully
charged, the charging indicator
light E disappears.
Notes
7 Charge up the batteries completely
(for at least 12 hours) before you
first use them or if you have not used
them for a long time.
7 The ambient temperature should be
between 5 °C and 40 °C.
7 Once you have used the appliance,
charging time is approx. 8 hours.
7 In its fully charged state, the ap-
pliance can run for approx. 45
minutes. It is not advisable to charge
the batteries after each use. Only
charge the batteries when they
are completely discharged. This
increases their service life.
3 Pull the power cord out of the power
cord socket F and the power sup-
ply unit J out of the wall socket.

19 ENGLISH
OPERATION ___________________________
Mains operation
Only operate the appliance with the
power supply unit J provided.
Check that the voltage indicated on
the type plate of the power supply unit
J corresponds to your local power
supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power supply unit J.
1 Plug the power supply unit J into
the wall socket.
2 Insert the power cord into the power
cord socket F on the appliance.
Caution
7 Never use the appliance in mains
operation when you are beside a
water connection.
Shaving
Note
7 If the hair you shave is longer than
10 mm, pre-trim the hair with the
comb attachment I to a length of
5 mm for an optimal shaving per-
formance.
1 Remove the plastic protective cap
G.
Caution
7 The shaving foil and side trimmers
for long hair must not be damaged.
Replace any damaged parts before
shaving.
2 Press the switch D, then push the
switch D upwards to turn on the
appliance.
3 Stretch the skin with your free hand
to make the hairs stand upright.

20ENGLISH
OPERATION ___________________________
4 Shave with slow, gentle movements
against the direction of hair growth.
Hold the appliance at a 70° angle
to your skin.
– Make sure that the shaving foil
and side trimmer are fully in con-
tact with your skin.
Caution
7 Do not press too hard as you may
damage the shaving foil.
5 After use, switch off the appliance
by pressing the switch D, then
pushing the switch D downwards,
clean the shaving head (see section
"Cleaning the shaving head"), and
put the protective cap G back on.
Armpits
1 When you shave the underarm
area, place one arm behind your
head to stretch the skin.
2 Move the Lady Shaver gently over
the skin.
– To achieve the best result, move
the appliance up and down and
from left to right.

21 ENGLISH
OPERATION ___________________________
Trimming
1 Attach the trimming comb I onto
the appliance.
2 Press the switch D, then push the
switch D upwards to turn on the
appliance.
3 Move the appliance against the
direction of hair growth.
– Make sure that the surface of the
comb is in full contact with the
skin at all times.
Hints and Tips
7 In the case of thick or copious hair
growth, which cannot be removed
by just one shave, do one quick
shave and then a more thorough
second one.
7 Do not apply alcohol based-lotions
to the skin directly before or after
shaving. If you want, you can apply
some baby powder after shaving.
7 Do not press the shaving head too
hard onto the skin, as this has a neg-
ative effect on shaving performance
and may cause some skin irritation.
7 Basically, there is no difference in
using the appliance on wet skin and
using it on dry skin. You can simply
choose which method you like best.
But if you prefer to use the Lady
Shaver dry, make sure that your skin
is clean and completely dry.

22ENGLISH
INFORMATION ________________________
General information
The device must be cleaned regu-
larly so that you can continue to
enjoy its top performance and opti-
mum results. Clean the housing with
a soft, damp cloth and mild deter-
gent. Do not use household cleaning
agents.
Caution
7 Never hold the appliance in water or
any other liquid.
Detaching/attaching
the shaving head
1 To detach the shaving head B,
press the release buttons C on both
sides of the appliance and pull the
shaving head B.
2 To attach the shaving head B push
it onto the appliance.
Note
7 Do not exert pressure on the shaving
foil A to avoid damage.
Attaching/detaching at-
tachments
1 To attach protective cap G or
trimming comb I, carefully put it
onto the appliance. Make sure the
recess of the comb is aligned with
the front of the appliance.

23 ENGLISH
INFORMATION ________________________
Cleaning the shaving
head
1 Turn the appliance off and unplug
the cable. Pull the power supply unit
J out of the mains socket.
2 Pull up the shaving head B out of
the attachment (see “Attaching / de-
taching the shaving head” section).
3 To clean the shaving head B or the
cutting system A rinse them under
running water or use the cleaning
brush K.
4 Clean the bottom of the shaving
head B with the cleaning brush K
supplied.
Note
7 Do not clean the appliance with
water over shower temperature.

24ENGLISH
INFORMATION ________________________
5 Rinse the hair off the appliance.
6 Make sure the appliance is com-
pletely dry before you reattach the
cuting system A.
7 Insert the cutting system A in the
shaving head B again.
Storage
If you do not want to use the ap-
pliance for a long period of time,
please store it carefully.
7 Use the hanging holder H to hang
the appliance securely and stable.
7 Make sure that it is switched off and
completely dry.
7 Store the appliance and the power
supply unit J in in a cool, dry place.
7 Make sure the appliance is kept out
of reach of children.

25 ENGLISH
INFORMATION ________________________
Environmental note
This product has been made from
high-quality parts and materials,
which can be re-used and are suit-
able for recycling.
Therefore, do not dis-
pose of the product with
normal household
waste at the end of its
service life. Take it to a
collection point for the
recycling of electrical and electronic
equipment where the battery is taken
out of the device and disposed sepa-
rately. This is indicated by this sym-
bol on the product, in the operating
manual and on the packaging.
Please consult your local authorities
to find out where the nearest collec-
tion point is.
Help protect the environment by re-
cycling used products.
Technical data
This product conforms to the
European directives
2004/108/EC, 2006/95/
EC and 2009/125/EC.
Power Supply
Power supply unit SW-030100EUL
Input: 100 – 240 V ~, 50–60 Hz
Output: 3.6 V DC 1000 mA
Batteries: Nickel metal hydride
AAA, 2.4 V
Ni-MH
Technical and design modifications
reserved.

www.grundig.com
72011 908 1700 12/33
AUS GUTEM GRUND