Grundig RCD8300 User manual

FINE ARTS AUDION
WIRELESS HIFI SYSTEM
Operating manual
ENGLISH
55404 941 1200

2
CONTENTS________________________________________________________________________
5 FineArts Audion
5 The system operation of your HiFi
7 Special features of your HiFi system
8 Packing contents/accessories
9 Set-up and safety
10 The wireless transmission system
11 Overview
11 The HiFi system controls
12 The back and bottom of the HiFi system
13 The remote control
15 The remote control menu system
Dear customers,
This operating manual assumes that your authorised dealer has provided you with your
FineArts Audion system in an assembled state, connected and ready for operation.
If you want to change the settings yourself or look for new radio stations, please read the
enclosed installation manual.
The operating manual also describes the digital radio operation (Digital Audio Broad-
casting) and illustrates the display options for this operating mode. DAB operation is only
possible with an integrated DAB module (optional).

ENGLISH
3
CONTENTS__________________________________________________________________________________
17 General functions
17 Switching on
17 Switching off
18 Switching on from standby
18 Selecting the input source
19 Switching to standby
19 Organising the HiFi system display
20 Volume and tone
20 Adjusting the volume
20 Adjusting the treble, bass, balance and fader
21 Sound setting
22 Switching loudness on and off
22 Muting the HiFi system
22 Setting up additional pairs of loudspeakers
23 FM mode
23 Preparation
23 Selecting radio stations
25 Stereo/mono reception
26 RDS reception
30 DAB mode
30 Preparation
30 Selecting DAB stations
34 Additional functions in DAB mode

4
CONTENTS__________________________________________________________________________________
37 CD mode
37 General information about CDs
37 Preparation
38 Playing back a CD
41 Selecting a CD track
42 Additional functions
44 Playing back tracks in a selected order – creating a track memory
48 Sleep timer mode
49 Multi-room mode
49 Operating pairs of speakers in additional rooms
49 Switching the remote control to a pair of speakers in another room
50 Setting up different input sources for individual rooms
51 Information
51 Changing the remote control batteries
52 Other remote control operating modes
61 Rectifying minor problems
63 Technical data
64 GRUNDIG Service

ENGLISH
5
FINE ARTS AUDION________________________________________________
The system operation of your HiFi
The following illustration shows you the options for multi-room operation of
your HiFi system, and for operation in combination with other individual
Grundig components.
These options are explained on the following page.
S-VHSVideo in
Slider
Volume Program
Audioin
LR
LSP2
LSP2 RCD 8300 HiFi system LSP2
LSP2
Television with WT2
I
Living room
ǵ
LSP3
ǵ
LSP3
ǵ
LSP3
ǵ
LSP3
Study Bedroom
PR1
PR1 PR1
Guest room
ǵ
LSP3
ǵ
LSP3
PR1
TV operation
CD mode
CD mode FM mode

6
FINE ARTS AUDION__________________________________________________________________
The FineArts Audion system is made up of the following individual components:
– RCD 8300 HiFi system
– PR1 remote control
– LSP2 active loudspeaker
– LSP3 active loudspeaker
In multi-room mode, room 1 always refers to the room in which the HiFi system
is installed.
Within the framework of the overall system, the following operating modes are
possible:
– The HiFi system operates one or two pairs of loudspeakers in room 1.
– The HiFi system operates additional pairs of loudspeakers in other rooms (one
pair of speakers per room).
– In multi-room mode, two different input sources can be set for different rooms,
i.e. FM, CD and – if a DAB module is integrated – DAB.
– In multi-room mode, you can operate the HiFi system and the pairs of spea-
kers in the other rooms by means of a remote control or additional remote
controls.
– You can operate the HiFi system or a Grundig television (room 1) with a
remote control.
– Via the WT2 radio module, the television alternately operates the same louds-
peakers as the HiFi system (room 1). The WT2 radio module must be configu-
red on the HiFi system.

ENGLISH
7
FINE ARTS AUDION__________________________________________________________________
Special features of your HiFi system
Perfect sound is not a question of size, but of quality. This system gives you clear
and vivid sound packaged in a timeless design.
The RCD 8300 is an elegant combination of tuner and CD operation, with the
added option of receiving digital radio stations (DAB). It can be used as a
standing device, or it can be mounted on the wall .
It uses a built-in transmitter to transfer data signals to the remote control and
audio signals to the loudspeakers.
All its components communicate without wires – even through walls.
The CD player has a CD text function. This means that if ”CD text” is provided
by a CD, the HiFi and remote control displays can show information on the artist
and the contents of the CD.
The large display of the RCD 8300 can be rotated by a motor in horizontal
mode, enabling you to read its information in comfort.
Up to nine pairs of loudspeakers – all in different rooms – can be operated with
the HiFi system. Their sound settings can be adjusted individually using the
remote control.
In combination with the WT2 radio module the RCD 8300 active loudspeakers
can also be used for operation with special Grundig televisions.

8
PACKING CONTENTS/ACCESSORIES____
Packing contents
Accessories
Active loudspeakers (LSP2 or LSP3)
Personal Remote 1 remote control with
three 1.5 V mignon-type batteries
Wall bracket with cable channel
DAB module, DAB antenna
Ask your specialist dealer about
these modification options.
ǵ
FINE ARTS AUDION
FINE ARTS AUDION
1RCD 8300 HiFi system
2Auxiliary antenna (Dipol)
3Power cord
4Operating manual
5Installation manual
12
3
4
5

ENGLISH
9
SET-UP AND SAFETY ______________________________________________
To ensure that this high-quality, easy-to-use HiFi system will provide lasting
satisfaction and enjoyment, please observe the following instructions when
setting it up.
This HiFi system is designed for the playback of audio signals.
Any other use is expressly prohibited.
Position your HiFi system as near as possible to the centre of the area of appli-
cation. If you want to set up the HiFi system on wall shelves or in cupboards,
please ensure that the device is adequately ventilated. There must be at least
10 cm of space at the side, above and at the back of the device.
If the HiFi is subject to sudden changes in temperature, for example if it is
brought in from the cold to a warm room, do not connect it to the mains supply,
but let it stand for at least two hours before you insert a CD.
The HiFi system is designed for use in dry rooms. If you do use it in the open,
please ensure that it is protected from moisture, such as rain or water splashes,
and from direct sunlight. Do not place the HiFi system close to heating units or in
direct sunlight, as this will impair cooling.
To not insert foreign objects in the HiFi CD compartment. Do not place any ves-
sels containing fluid, such as vases, on the HiFi system. These may be knocked
over and spill fluid on the electrical components, thus presenting a safety risk.
Do not place any objects such as burning candles on the HiFi system.
Never open the HiFi casing under any circumstances. Warranty claims are
excluded for damage resulting from improper handling.
Thunderstorms are a danger to all electrical devices. Even if the HiFi is switched
off, it can be damaged by a lightning strike to the mains. Always disconnect the
mains and antenna plugs during a storm.
10
cm
ǵ
10
cm
10
cm
10
cm
°C
2h
°C
ǵ
ǵ
ǵ
ǵ
! SERVICE !! SERVICE !! SERVICE !

10
SET-UP AND SAFETY_________________________________________________________________
If the stereo system no longer scans CDs perfectly, use a standard cleaning CD
to clean the laser optics. Other cleaning methods may damage the laser optics.
Always keep the CD compartment closed to prevent dust from collecting on the
laser optics.
The wireless transmission system
Your HiFi system is equipped with a system which enables it to transmit and
receive audio and data signals Connection cables to the loudspeakers are no
longer necessary.
The transmission strength is limited by national and international regulations to
prevent radio interference from neighbouring devices.
The transmission power is <10 mW. This guarantees an unhindered reception
range of approximately 100 m. This range is restricted inside buildings, depen-
ding on the construction materials used.
Avoid placing the system near metal objects such as radiators or electrical devi-
ces which use radio signals, such as wireless headphones or cordless or mobile
phones.
Since the audio and data signals are not transmitted on an exclusive range we
cannot guarantee that this will not cause interference. To avoid interference you
can choose a different channel combination. Make sure that the same channel
combination is set on the HiFi system and the WT2 radio module, if there is one.
In some circumstances, people, walls and other surfaces can reflect radio sig-
nals. Reflected signals, mixed with direct (non-reflected) signals, can cause a
type of interference known as multi-path reception. This can lead to noise or a
temporary loss of sound. If such interference does occur, you can usually rectify
it by repositioning the active loudspeakers or the HiFi system.

ENGLISH
11
The HiFi system controls
SOURCE Selects the input sources in the order FM,
DAB (if a DAB module is integrated)
and CD.
Switches on the system in room 1 with
the last input source selected.
–+Adjusts the volume.
■ıIn tuner or DAB mode: selects the
station positions.
In CD mode: starts playback and selects
playback stop.
ǼSwitches the HiFi system in room 1 to
and from standby mode.
The CD compartment lighting is also
for indicating standby and operation.
Note:
The buttons on the HiFi system are only
designed for emergency operation. In
normal operation, please use the remo-
te control.
Display Displays various information for the FM, DAB (optional) and
CD modes.
åOpens and closes the CD compartment. Switches the HiFi
system from standby to CD mode.
CD compart- Open by touching the » å« sensor button.
ment
OVERVIEW _______________________________________________________________________
SOURCE

12
OVERVIEW__________________________________________________________________________________
The back and bottom of the HiFi system
IRadio antenna (must be perpendicular).
)Mains switch (back of device), switches the
HiFi on and off.
The only way to completely isolate the HiFi
system from the mains supply is to pull the
plug out.
Cover for the flash plug. Only for dealers for upda-
ting the system software (bottom of device).
Threaded connection (F plug connection) for the
DAB antenna (if a DAB module is integrated into the
HiFi system – recess on bottom of device).
Antenna socket for the rooftop antenna or the auxili-
ary antenna supplied (recess on bottom of device).
Socket for mains cable (recess on bottom of device).

ENGLISH
13
OVERVIEW__________________________________________________________________________________
The remote control
9Switches the HiFi system to and from standby mode.
In multi-room mode: switches only the loudspeakers in the current
room to standby. Hold down to switch the whole system to standby.
Display Display of the remote control and digital keypad (touchpad with
soft keys): guides the user through the operation and installation of
the system.
In FM, DAB and CD mode, it shows the relevant controls (soft keys)
and information.
If the keypad is not used for 30 seconds, the display switches off
automatically. To switch it on again, press the »OK« key (hard key)
on the remote control.
Audio Selects the HiFi mode (FineArts Audion). Switches the remote con-
trol on with the »AUDIO« menu.
Vision Selects the television mode (FineArts Vision). Selects other Vision
operating modes such as DVD and video (see pages 52 to 60).
P +P – In FM and DAB mode: selects the station positions in steps.
In CD mode: selects the previous or following CD track.
OK Switches the remote control display on.
Confirms the menu entries (primarily in Vision mode).
ǸǷ In FM or DAB mode: changes the FM frequency or the DAB station
positions in steps. Hold down to start the automatic search.
In CD mode: press briefly for the next or previous track. Hold down
to search for a particular passage.

14
OVERVIEW__________________________________________________________________________________
–}+Adjusts the volume in the relevant room.
dSwitches the loudspeakers to and from mute mode.
RSwitches the lighting for the remote control display on and off.
zNot used.
wFor displaying the current time.
In standby mode, switches the display lighting of the HiFi system on
(only in room 1).
MCalls up the sleep timer function.
FCalls up the »SOUND« menu.

ENGLISH
15
OVERVIEW__________________________________________________________________________________
The remote control menu system
Your HiFi system’s remote control unit is equipped with a menu system.
The menus contain a wide range of information on setting up and operating the
system.
Press »Audio« to switch on the remote control. The »AUDIO« main menu
appears in the display. At the same time, the menu items also function as digital
keys (soft keys), with which you can call up different functions and other menus
directly. Some keys only appear when the relevant system components are
present.
The Audio main menu
Display and key Meaning and function
AUDIO Audio mode has been selected. The remote control
is effective in room 1 (for multi-room operation).
SELECT ROOM For multi-room operation, this selects the room in
which the remote control should be effective.
< LCD > Rotates the display of the HiFi system to the right
or the left (only in horizontal mode).
SETUP Calls up the »SETUP« menu for different settings.
M-ROOM Activates the menu for switching the input sources
on and off in multi-room operation.
CD Selects the CD input source.
FM TUNER Selects the FM input source.
DAB TUNER Selects the DAB input source (if a DAB module is
integrated).
1
AUDIO
DAB TUNER 
FM TUNER 
CD 
M-ROOM  SETUP 
>> 
LCD
<< 
SELECT ROOM 
1

16
OVERVIEW__________________________________________________________________________________
Note:
The room display » « does not appear if loudspeakers are installed in only
one room.
In order to prolong the life of the batteries, the remote control display
switches off after a short while if no function is selected. Press the »OK«
button to switch the display back on again.
The different menus
Call up the »SETUP« menu by pressing »SETUP« in the »AUDIO« main menu.
However, before the »SETUP« menu opens you have to enter a PIN number
and confirm it with »END«. This prevents you from accidentally changing the
settings entered in the »SETUP« menu. The PIN number is »1« »5« »9« »0«.
SERVICE Service menu for the authorised dealer.
INSTALLATION Selects the »INSTALLATION« menu.
LANGUAGE Selects the language options for the menus.
TIME/DATE For setting the time and the date.
CHANNELS For setting the channel combination for the
transmission of the audio signals.
Return to the »AUDIO« main menu.
The individual menu items are also shown in the display on the HiFi system. This
provides you with a clear, easy-to-follow menu system. In subordinate menus,
press » « to return to the previous menu.
These menus and submenus are explained in detail in the relevant sections of
this manual, with the aid of a number of examples.
1
SETUP

CHANNELS 
TIME/DATE 
LANGUAGE 
INSTALLATION 
SERVICE 
1
M-ROOM  SETUP 
PIN:
3  2  1 

ENGLISH
17
GENERAL FUNCTIONS _________________________________________
Switching on
1Use the mains switch on the loudspeakers to switch them into standby mode.
– The mode indicators on the loudspeakers light up orange.
2Switch on the HiFi system by pressing the mains switch on the back of the
HiFi.
– The HiFi system switches on with the input source last selected.
– The loudspeakers in room 1 switch on automatically and the mode indica-
tors on the loudspeakers light up green.
Note:
If the HiFi system had been in standby mode before it was switched off using
the mains switch, it automatically returns to standby when you then press the
mains switch again.
The only way to isolate the HiFi system and the loudspeakers from the mains
supply is to pull the mains plugs.
Switching off
1First turn off the loudspeakers with the mains switches, then turn off the HiFi
system with the mains switch.
Notes:
After you have installed the system, we recommend that you only use the
»9« button to switch the HiFi and the loudspeakers to standby, and to
switch them on from standby. You should not use the mains switches for swit-
ching on and off any more.
The following applies for multi-room mode: If, for example, the loudspeakers
in room 3 are switched to stand-by mode and are then switched on again,
the FM input source is always played instead of the last input source
selected.

18
GENERAL FUNCTIONS______________________________________________________________
Switching on from standby...
Note:
Your HiFi system is equipped with a volume limit. This restricts the volume to
a value of 25 when you switch it on.
... with the »9« button
This function only applies to the room for which the remote control is set (see
also page 49).
1Switch the HiFi system on from standby mode by pressing »9«.
– This automatically switches on the loudspeakers.
– You hear the last input source that was selected.
... with the input source buttons
1Call up the Audio menu with »Audio«.
2In the »AUDIO« menu, select the »CD«, »FM TUNER« or »DAB TUNER«
input source.
... with the CD function
1Touch the » å« sensor button on the HiFi system.
– The HiFi system switches on with the CD input source and the CD compart-
ment opens.
Selecting the input source
1Call up the Audio menu with »Audio«.
2In the »AUDIO« menu, select the »CD«, »FM TUNER« or »DAB TUNER«
input source.
FM TUNER 
CD 

ENGLISH
19
GENERAL FUNCTIONS______________________________________________________________
Switching to standby
1Press »Ǽ« to switch the loudspeakers in the current room to standby mode.
– If you switch the loudspeakers in the last active room to standby, the HiFi
system also switches to standby.
– The mode indicators on the loudspeakers light up orange.
or
Press »Ǽ« for more than 3 seconds.
– The loudspeakers in all the rooms and the HiFi system are switched to
standby mode.
– The mode indicators on the loudspeakers light up orange.
– The CD compartment lighting on the HiFi system is also a standby indica-
tor which adjusts its brightness to the surrounding brightness in two steps.
The switching of the lighting is time-delayed and is controlled by a light-
sensitive sensor.
Organising the HiFi system display
You can turn the display of your HiFi system – when it is positioned horizontally –
by pressing a button. When it is positioned vertically, or wall-mounted, you can
only tilt the display upwards or downwards by hand.
1Call up the »AUDIO« menu by pressing »Audio«.
2In the »AUDIO« menu, press »< LCD« or »LCD >« to rotate the display of
the HiFi system to the left or the right.
>> 
LCD
<< 
Sensor

20
VOLUME AND TONE _____________________________________________
You can enter the volume, bass, treble and balance settings separately for the
loudspeakers in room 1 (and for other pairs of speakers in multi-room mode).
The loudspeakers in room 1 must be in the same room as the HiFi system.
Adjusting the volume
1Adjust the volume with »– }«or»
}+«.
– Display: »VOLUME« and the value (from »0« to » 3«).
Note:
If you change the volume using »+« or »–« on the HiFi system, this only
affects the loudspeakers in room 1.
Adjusting the treble, bass, balance and fader
Note:
The »TREBLE« and »BASS« settings are only available if you previously
selected the »USER« (user-defined) sound setting.
»FADER« only appears if two pairs of loudspeakers are installed in room 1
and the remote control is set to this room (see the relevant section on page 49).
1Call up the »SOUND« menu by pressing the »F« (blue) button.
2In the »SOUND« menu, call up the »TREBLE«, »BASS« or »BAL.« setting.
3Adjust the treble, bass or balance with »<« or »>«.
– The setting is saved automatically.
SOUND
||||||||I||||||||
USER
OFF
LOUDNESS
DSC 
BAL.  FADER 
BASS  TREBLE 
>> 
0
<< 
1