GST GLM-154 User manual

LCD DVR COMBO
(Model : GLM-154)
USER’S
MANUAL
Firmware Version 2.4
Revision Date : 2005. 03. 25

•INDEX
■CHAPTER 1 –System Structure
1.1 System Specification ----------------------------------------------- 4
1.2 Set and Accessories -------------------------------------------------- 5
1.3 External Organization of System ---------------------------------------6
■ CHAPTER 2 - Description
2.1 Front Panel ------------------------------------------------------- 7
2.2 Rear Panel ---------------------------------------------------- 8
2.3 Remote Controller -------------------------------------------- 9
■ CHAPTER 3 - Installation
3.1 Hard Disk Installation ------------------------------------------------ 10
3.2 Camera Connection ------------------------------------------------ 11
3.3 Monitor Connection ------------------------------------------------- 11
3.4 Network Connection ------------------------------------------------ 11
3.5 Alarm / Relay / PTZ Connection ------------------------------------------- 12
3.6 System initial START (Power Connection)-------------------------------- 13
※ Hard Disk Format ------------------------------------------------- 13
■CHAPTER 4 -Display
4.1 System Power ON --------------------------------------------------- 14
4.2 Select Screen Mode ------------------------------------------------- 14
4.3 Convert Screen Mode ------------------------------------------------ 15
4.4 Control PTZ / Focus Control --------------------------------------------- 15
4.4.1 PTZ / Focus Menu ---------------------------------------------------15
4.4.1.1 PTZ Control -------------------------------------------------------16
4.4.1.2 Focus / IRIS Control ------------------------------------------------16
4.4.1.3 PRESET Control ----------------------------------------------------17
4.4.1.4 Swing Control -----------------------------------------------------17
4.5 System Power OFF -------------------------------------------------- 18
■CHAPTER 5 -Search
◎ Go to Search ----------------------------------------------- 19
5.1 Search by Date/Time ------------------------------------------------ 19
5.2 Search by Event -------------------------------------------------- 20
1

•INDEX
■ CHAPTER 6 - Menu
◎ Go to Menu ----------------------------------------------------- 21
◎ Initial Menu Display ---------------------------------------------- 21
6.1 Display --------------------------------------------------- 22
6.2 Record ---------------------------------------------------- 22
6.2.1 Size/Rec. Rate/Quality ------------------------------------ 22
6.2.2 Timer Recording Setup ------------------------------------23
6.2.3 Motion Detection Setup -----------------------------------24
6.2.4 Alarm Recording Setup -------------------------------------- 24
◎ Time Recording Weekly Setup -------------------------------------- 25
◎ Partial Motion Region Setup ----------------------------------------- 26
6.3 Camera ---------------------------------------------------------- 27
6.3.1 Status/Title Setup ----------------------------------------------- 27
6.3.2 Covert/PTZ Setup --------------------------------------------- 27
6.3.3 Color Setup -------------------------------------------------- 28
6.4 AUDIO ------------------------------------------------------28
6.4.1 Audio Recording Setup ----------------------------------------- 28
6.4.2 Live Audio Setup ---------------------------------------------- 29
6.5 ALARM ---------------------------------------------------- 29
6.5.1 Alarm Input Setup ----------------------------------------------- 29
6.5.2 Relay Output Setup ---------------------------------------------- 30
6.6 SYSTEM -----------------------------------------------------30
6.6.1 Date/Time ----------------------------------------------- 30
6.6.2 Network Setup TCP / IP----------------------------------- 31 ~ 32
6.6.3 Buzzer Setup ----------------------------------------------- 33
6.6.4 Password -------------------------------------------------33
6.6.4.1 Administrator Password ---------------------------------33
6.6.4.2 Manager Password ------------------------------------- 34
6.6.4.3 Operator Password ------------------------------------ 34
6.6.4.4 Network Password ------------------------------------ 34
6.6.5 Disk Write Mode -------------------------------------------- 35
6.6.6 System Information -------------------------------------- 35
6.6.7 Factory Default --------------------------------------------- 35
2

•INDEX
■ CHAPTER 7 - Remote Agent
◎ System Requirement ------------------------------------------- 36
◎ DVR Remote Agent 1.0 Installation ------------------------------- 36 ~ 38
7.1 Monitoring
7.1.1 Function Introduction ---------------------------------------- 39
7.1.2 Screen Division Selection -------------------------------------- 40
7.1.3 PTZ Control ------------------------------------------------- 40
7.1.4 Selection Network ID ----------------------------------------- 40
7.1.5 AVI File Conversion ------------------------------------------- 41
7.1.6 Color Adjustment -------------------------------------------- 41
7.2. Search
7.2.1 Function Introduction ----------------------------------------- 42
7.2.2 Search Method ----------------------------------------------- 43
7.2.3 Search Option ----------------------------------------- 44 ~ 48
7.3. Setting
7.3.1 Connection ID Setup ------------------------------------------- 49
7.3.2 Option Setting ------------------------------------------------ 50
7.3.3 DVR Server Remote Setup -------------------------------------50 ~ 52
■CHAPTER 8 –Web Client --------------------------------------------- 53 ~ 54
3

1.1 System Specification
4
• Chapter 1 – System Structure
4 lnputAudio lnput
10/100BASE- TX EthernetLAN
Button or IR RemoconSystem Operation
Mono 1WSpeaker
4 lnput / 1 OutputAlarm / Relay
RS-485P/T/Z Control & Port
Composite Video (BNC x 1)Video Output
100/130(CR≥10)
Viewing Angel
[˚,U/D/L/R]
16Response Time [ms]
450Luminance [cd/㎡]
60Color Saturation(%)
600:1Contrast Ratio
1,024 x RGB x 768Resolution
32bit DSPCPU
?kgWeight
350(w)×315(H)×65(D)mm (Stand not included)Dimension
DC12V, 5A (Adaptor)Power
5~40˚C/ 20~80%RHOperating Temp and Humidity
-20~65˚C / 20~80%RHStorage Temp and Humidity
Auto- Rebooting, Auto- Scan and Recovery for Data System Recovery After Power Failure
Remote Pan/Tilt/Zoom/Focus/IrisRemote Control
Remote Live Viewing, Remote Playback and Remote File copy
Playback, Network Transmission, Recording (Triplex operation)
Remote Transmission
Supports the Setting of Motion Sensitivity per CameraMotion Detection
Setting Recording Schedule per cameraRecording Schedule
Continuous, Motion Detection and Sensor ActivatedRecording Modes
3~5Kbyte @352×240 (PAL :352×288)
5~10Kbyte @704×240 (PAL : 704×288)
6~16Kbyte @704×480 (PAL : 704×576)
Byte Size per image
MPEG4 (Modified)Compression Method
NTSC : 352×240, 704×240, 704×480
PAL : 352×288, 704×288, 704×576
Recording Resolution
30/25704×480
60/50704×240
120/100352×240
Recording
Speed
1/4 Channel ModeScreen Modes
Composite Video RJ45 x 4 or BNC x 4 (NTSC/PAL)Video Input
RTOSOS
80GBHDD
LCD PANEL

1.3 Set and Accessories
GLM-154 Set
Remote Controller
User’s
Manual
AAA Battery X 2
DC12V Adaptor Power Cord
• Packing Components
5
Please confirm accessories when you open packing box.
Installation CD
ROM Camera set (Optional)

• System Organization
1.4 External Organization of System
6
Remote Client PC
Image Printer
NETWORK
Alarm Sensor #1~4 Relay Out
GLM-154
Camera #1~4
Video In
Video Out
TCP/IP
Alarm
Input/Out
Remocon
Monitor

7
• Chapter 2 - Description
① Power : System Power On/Off.
② LED Indicator : Indicate System working Status
•POWER : System On/Off
• RECORD : Record On/Off
•NETWORK : Client Network Connect On/Off
•ALARM : Alarm Sensor On/Off
③ Channel Select Button : When Select Channel or Input Password
④ SCR Mode : When Select Screen Division Mode or Rotation Mode
⑤ Menu : Go to System Menu
⑥ Search : Go to Search Mode for Searching Recorded Video
⑦ PTZ/Focus : Go to Camera PTZ/Focus Control
⑧ Remote Controller Sensor Input (Refer to using of remote controller)
⑨ Search Controller & Volume Control :
Search Recorded video, Control Menu, PTZ/Focus and adjust volume of speaker
⑩ Enter : Press Enter to Apply Changing Setup
⑪ Return : Cancel Setup or Return Previous Mode
2.1 Front Panel
Tip • Channel Selection Button is prior to SCR mode.
• When Remote Controller Sensor Input is blocked by something, it cause
1remote controller do not work properly.
• When press any button, it operate with Beep Sound.
②⑤⑦⑨⑪
⑧①③ ④⑥⑩
VOL

8
• Description
① Video In : 4 Camera Connectable
(Reference to Page 60, GLM-154 PTZ available Camera Products)
② Monitor Out : Output DVR Video when connected AV Monitor
③ Ethernet (TCP/IP) : Connect Port for LAN Cable
(Possible to Remote Survey to Connect to Client)
④ Alarm / Relay / RS-485 : Connect Port for Sensor & Relay, PTZ (Pan / Tilt / Zoom)
⑤ DC Power Input Terminal : Power is Supplied by DC 12V Adaptor
2.2 Rear Panel
Tip • When System Installation, Please after System Off, connect Rear Panel
• Please Power Supply Use Specific Adaptor
①③④⑤ ②

9
• Description
PTZ/IRIS
Mode
• Unused Button’s Description is Omitted.
• Every Button is Operated Same as Front Panel Button.
• Remote Controller can Operate when Remote Controller Sensor Input Part Reacted.
※Caution : If there are many DVRs at the same place,
they are operate together when press remote controller
Channel Select Button
(4ch Available, #1~4 Button)
POWER
System
ON/OFF
MENU: Open menu
RETURN
Cancel
Setup or
Return to
Previous
ENTER: Apply Setup Change
Change
Screen Mode
Open
Search Mode
Search Controller : Control Playback Option
(EX. Speed of Playback, Move on Menu,
1Control PTZ/Focus)
2.3 Remote Controller

① Jumper Setup Master or Slave
10
3.1 Hard Disk Installation
• Refer to Jumper Pin Setting on HDD Surface
• When HDD Installed, Fix jump as Master
1and Connect Pin at the Left end of Jumper
!!Please use HDD which can supply higher than UDMA66.!!
※ Example of Samsung HDD Jumper Setup
• Chapter 3 - Installation
• Jumper Setup as Master or Slave refer to Explanation
of Surface Hard Disk
• Jumper is located at Hard Disk Data Cable or Rear
1Side of Hard Disk
• Hard Disk is Installed, Setup as Master
1
‼When Hard Disk changing, it must be serviced
after System Off (Power Button System Off).
If not, it’s a cause of Fatal Failure of HDD‼

11
•Installation
3.2 Camera Connection
Connect Camera at Multi-Jack Modular Port in Back Side Panel.
3.3 Monitor Connection
Connect Monitor Out of GLM-154 to Another Monitor Input
3.4 Network Connection
Connect Ethernet Terminal to Network System (Personal Computer etc)
Monitor

•Installation
12
3.6 Alarm, Relay and PTZ Connection
PTZ 14 Pin Cable
⑨R+
⑩R-
⑪T+
⑫T-
RS485
D+
D-
3.7 Power Connection
Connect DC Power Input Terminal and Specific Adaptor
DC12V Adaptor
① ③
②
①ALARM
Alarm Input Terminal ( “IN1, IN2, IN3, IN4”,GND )
Connect Sensor Input of Channel and GND Connect Ground cable
② RELAY
Alarm Output Terminal ( “NO, NC, COM”)
After Checking Alarm Output Type, Connect to NO (Normal Open) or NC (Normal Close)
“COM”: Connect Remainder ( Ground connector)
③ RS-485
Connect PTZ Camera ( “D+, D-”) : Connect PTZ Camera Control Line (Plus , Minus Terminal)

13
•Installation
3.7 System initial START
※ Caution : Hard Disk Format !!!
- If Do Not Formatted New Hard Disk , System Can’t Recognize the HDD.
So there’s the Same Situation without HDD. Please Format HDD when
Insert New HDD.
(Only Screen Display is Possible, Work Menu and Search are impossible)
2. New HDD Format
(Select Play , Backward Play Key)
3. System Start (Initial Mode)
1. Power On
※ 80GByte HDD Capacity

14
• Chapter 4 - Display
4.1 System Power ON
4.2 Select Screen Mode
CAMERA
2004/01/01
00:00:00
• Press Power Button to Start System
• After Checking Hard Disk, Input Your Password to
1Operate
• Initial Screen View Mode is Quad Division Mode
1and Recording Mode
Picture of Power On
after Finishing Installation
Tip • Check System Condition using LED
POWER : Showing System On/Off
RECORD : Showing Record On/Off
NETWORK : Showing Client Connection Status
ALARM : Lighting when Sensor Alarm Activate
• Select One Channel among 4 Channels
• Move to One Enlargement Watch Mode when Quad Screen Division Mode
• Move to One Enlargement Watch Mode when Rotation Mode
• Each Channel Indicates Camera Name & Recording Status
• Present Time & Date display Central Lower Side of Monitor

15
• Display
SCR MODE
4.3 Convert Screen Mode (SCR MODE)
4.4 PTZ / FOCUS Control
• User can Select Watch Mode of 3 Kinds as followings
① Quad (4CH) Division Watch Mode
②Selected 1CH Watch Mode
③ 4CH Rotation Watch Mode
• Quad (4CH) Watch Mode is Initial Mode when System Start
• Control Camera PTZ (Pan/Tilt/Zoom) & Focus (Only Useable for Proper Camera)
• Press PTZ/FOCUS Button to Open PTZ Menu at Right-Under Side and Control by Search Controller
• Press PTZ/FOCUS Button Second Time to Open FOCUS/IRIS Menu and Control by Search Controller
Control Camera PTZ &
Focus by Search
Controller on PTZ Menu
Quad (4CH) Division
Watch Mode
Selected 1CH
Watch Mode
4CH Rotation Mode
PTZ/Focus Direction Key
VOL
Backward
Play
Play
Fast
Backward
Fast
Forward
Pause

① Control Camera Movement by “Faster”, “Slower”, “Backward Play”,
”Play” Button (Up, Down. Left and Right).
② Zoom In & Out by “Fast Backward”, “Fast Forward” Button.
③ Keep Press Button Make Continuous Movement.
16
PTZ CTL
UP
LEFT RIGHT
DOWN
FOCUS / IRIS CTL
UP
LEFT RIGHT
DOWN
• Press PTZ / FOCUS Button to Open PTZ Menu at Right-Under Side and Control by Search Controller
• When Press PTZ / FOCUS Button by Turns, Focus / IRIS, Preset, Swing Menu will Appear at
the Right-Under Side and possible to Control by Search Controller.
PRESET
NUMBER : 1
NUMBER CHANGE : UP/DOWN
SET : F1 GOTO : F2
SWING
MODE : PAN SWING
NUMBER CHANGE : UP/DOWN
FIELD CHANGE : LEFT/RIGHT
SET : F1 RUN : F2
4.4.1.1 PTZ Control
4.4.1.2 FOCUS / IRIS Control
① Control IRIS “Faster”, “Slower” Button.
② Focus On by “Backward Play”, “Play” Button.
③ Zoom In & Out by “Fast Backward”, “Fast Forward” Button.
④ Keep Press Button Make Continuous Movement.
• Display
4.4.1 PTZ / Focus Menu

① By PRESET Function, Possible to Setup Direction and Focus of PTZ Camera.
② After Selecting Position at PTZ Control Mode, Save Data at PRESET Mode.
③ Setup “NUMBER” from 1 to 128 by “Faster” & “Slower” Button.
17
4.4.1.4 SWING Control
① SWING Function Dedicate Each No. of Saved Preset and Swing as Pan or Tilt.
② Changing Mode by Backward Play Button.
Changing Setup by Faster, Slower Button.
PRESET
NUMBER : 1
NUMBER CHANGE : UP/DOWN
SET : F1 GOTO : F2
④ Save by Front Panel Key No.1 Button or F1 Button on Remote Controller.
⑤ To Move to Saved Location, Press Front Panel Key Button No.2 or F2 Button on Remote Controller.
SWING
MODE : PAN SWING
NUMBER CHANGE: UP/DOWN
FIELD CHANGE: LEFT/RIGHT
SET:F1 RUN:F2
③ PAN SWING MODE : Rotate Left , Right Side.
TILT SWING MODE : Rotate Up, Down Side.
START PRESET : Select Starting Point. (1~128)
END PRESET : Select End Point. (1~128)
SWING TIME : Select Halt Time as Each Point. (1~64sec)
SWING SPEED : Select Moving Speed of Camera. (1~64)
④ Save by Front Panel Key No. 1 Button or F1 Button on Remote Controller.
⑤ For Start SWING Mode, Press Front Panel Key No.2 or F2 Button on Remote Controller.
• Display
4.4.1.3 PRESET Control

18
•Display
4.5 System Power OFF (SHUTDOWN)
Tip
• System Log-On Possible ID : “Administrator”, “Manager”, “Operator”and “Network”
1. Administrator : Possible All Function Access (System On, Shutdown, Setup, Search)
2. Manager : Possible System On and Search
3. Operator : Possible System On
4. Network : Possible Connect by Remote Program
• Press Power Button to System Off
• Input Password and Press Enter

19
• Chapter 5 - Search
SEARCH • Press Search Button and Log-In
Administrator or Manager
ENTER
RETURN
2004/01/01
00:00:00 >
⊙ Go to Search Mode
• Use Direction Key to Move Menu
• To Open Each Menu Press Enter
• Return to Previous.
(Move to Previous Menu or Exit Search
1Mode and Return to Watch Mode)
Search Recorded Data
5.1 Search by Date/Time : Possible to Search Recorded Date & Time
① Move Cursor to Select Date of Calendar
(Recorded Date & Time are Indicated by Gray Color)
② Press Enter to Open Selected Date
③ Recorded Time Appear to Under Side
④ Press Enter Selecting Time
(One Scale is 15 Minute)
⑤ Menu Disappear and Play Recorded Video
• Showing Recorded Date & Time on Left-Upper Side
1as Watch Mode.
1Showing Playing Condition on Right-Under Side.
• Channel Selection Button in Watch Mode & SCR Mode
1Button are the Same as Search Mode.
(But Menu, Search, and PTZ/Focus Buttons are Exception)
VOL