GSWeb Playground Equipment GS-N201 Installation and operating instructions

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
1
INSTALLATION & MAINTENANCE INSTRUCTIONS
▲Completed Net
Features
The butterfly features GS Web Technology which includes
the highest steel content and the strongest connection
materials in the industry, including a steel-wire core
in our edge ropes and connection points crushed in place with
over 75 tons of pressure to ensure long life of the games
and maximum safety for the children.
GS Web Nets help bring movement, balance, exercise and fun
back into the playground.
Ages : 5 to 12 years
Capacity : 81 children
Size : L11.87m x W6.39m x H4.51m
Use zone : L16.01m x W9.36m

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
F.L
9,357
16,017
2,969
2
Safety area and Fall Height zone
Fall Height and safety area ▶
Safety area
The requirements for space and safety clearances are taken from
BS-EN 1176-1 / ASTM-F1487.
The use zone for stationary play equipment shall extend no less than
72 in. (1830mm) from all sides of the play structure.
Safety Area
Fall Height : 2969mm (from surface)
The Fall height on the external surface of a pyramid shaped space net
is the highest point attainable on the edge of the structure where an
unimpeded fall to the protective surface is possible. This height is based
on the center of gravity height of the maximum user.

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
3
Foundation Information
!Attention
Please refer to following details for foundation work.
Base plates are welded to the Rolling Hill’s pipe. After assembling
pipes and nets, fix the structure on the concrete.
Foundation Detail Foundation 1 ~ 9
Pouring Concrete
Pour concrete* into wooden support frame until flush to top edge
Allow 3-5 days for concrete to cure before proceeding to next step.
*Concrete is to be wet concrete with
minimum 25 MPA / 3500PSI.
**See the drawing

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
160 180 160
500
160180160
500
SAND
2 x 4 - 3/8" x 100L
SET ANCHOR
CONCRETE
Ø60.5
300400
250225 225
225250225
700
700
300500
SAND
10 x 4 - 5/8" x 200L
SET ANCHOR
Ø139.8
300500
SAND
2 x 4 - 5/8" x 200L
SET ANCHOR
2 x 4 - 3/8" x 100L
SET ANCHOR
Ø216.3
Ø60.5
Ø216.3
Ø60.5
657 180 126180 657
122180598
335350
215
325350450350325
1800
900
CONCRETE
CONCRETE
4
Foundation Information
Foundation 1 Foundation 2 Foundation 3

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
300500
SAND
Ø216.3 Ø216.3
2 x 4 - 5/8" x 200L
SET ANCHOR
325 350 450 350 325
1800
225350225
800
SAND
2 x 4 - 3/8" x 100L
SET ANCHOR
Ø60.5
300400
190 180
160180160
500
360 180 190
1100
Ø60.5
SAND
2 x 4 - 3/8" x 100L
SET ANCHOR
Ø60.5
300400
172 180
160180160
500
296 180 172
1000
Ø60.5
CONCRETE
CONCRETE CONCRETE
5
Foundation Information
Foundation 4 Foundation 5 Foundation 6

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
160 180 160
500
160180160
500
SAND
2 x 4 - 3/8" x 100L
SET ANCHOR
300400
Ø25 SOCKET
250175 175
175250175
600
600
300500
SAND
8 x 4 - 5/8" x 200L
SET ANCHOR
300350
500
500
SAND
4 x 2 - 1/2" x 125L
SET ANCHOR
125 250 125
200100200
CONCRETE CONCRETE CONCRETE
6
Foundation Information
Foundation 7 Foundation 8 Foundation 9

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
7
OVERALL ASSEMBLY –PIPE
Overall Assembly
Assemble the parts in the following order:
1. Check names of the parts.
-From “1” to “6” are frame’s name.
-From “11” to “20” are Post’s name.
2. To prevent any confusion, Divide all parts into groups,
Outside and Inside as below.
!Attention
It is very important to keep the stickers attached on the parts on until
the installation is completed.
If the stickers are detached during the installation, it might be difficult to
check whether the parts are correctly assembled in correct order and
position.
Quite much recommended to take care that no sticker is detached before
installation is completely finished.
The information on stickers is made up of part name and number such as
“1”~”6”.. etc.

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
-1 -2
8
OVERALL ASSEMBLY –Frame
No. 1
Frame 1
No. 1
Frame 1
No. 2
Frame 2
No. 2
Frame 2
No. 3
Frame 3
No. 4
Frame 4
No. 6
Frame 6
No. 5
Frame 5

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
9
OVERALL ASSEMBLY –Post
No. 15
Post 15
No. 16
Post 16
No. 11
Post 11
No. 12
Post 12
No. 13
Post 13
No. 14
Post 14
No. 17
Post 17
No. 18
Post 18
No. 20
Post 20
No. 19
Post 19
No. 21
Plate

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
10
OVERALL ASSEMBLY –Frame & Post
No. 102
Frame
Post
No. 101
Frame
Post
No. 103
No. 104

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
11
OVERALL ASSEMBLY - Net
Overall Assembly
Assemble the parts in the following order:
1. Check the net’s name.
2. Attach the net to the proper location of pipe in order as below picture.
Net A-2
Net B-2 Net B-1
Net -D1Net –D2
Net -E1
Net –E2
No. 22
Plate
No. 22
Plate
No. 22
Plate
No. 22
Plate
Net A-1

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
12
OVERALL ASSEMBLY - Net
Overall Assembly
Assemble the parts in the following order:
1. Check the net’s name.
2. Attach the net to the proper location of pipe in order as below picture.
Net C-1
No. 23
Plate
Net C-4
No. 23
Plate
Net C-3
No. 23
Plate
Net C-2
No. 23
Plate

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
13
OVERALL ASSEMBLY - Net
Overall Assembly
Assemble the parts in the following order:
1. Check the net’s name.
2. Attach the net to the proper location of pipe in order as below picture.
Fix Bolt
M6 x L15
Frame Frame
Fix Nut
M6 x L15

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
14
OVERALL ASSEMBLY - Disk
Overall Assembly (for Climbing Ropes)
1. Fix the Climbing ropes onto the concrete.
Set Anchor
! Attention
Do not drill holes on the concrete first.
After checking the tension of the stair net and
setting its distance, put the Set Anchor on concrete.

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
15
Maintenance
A. General safety measures
On the playground there should be a sign(pictogram) giving the following information:
a) general emergency telephone number;
b) telephone number to contact maintenance personnel;
c) name of the playground;
d) address of playground; and
e) other relevant local information, if applicable.
The entry, exit and emergency paths to and from a playground, intended for use by the public and emergency services, should be accessible
and free of obstacles at all times.
NOTE Attention is drawn to local regulations.
B. Procedures
Defects that occur during operation and which put safety at risk should be corrected without delay. If this is not possible, the equipment
should be secured against use e.g. by immobilization or removal.
There should be written operational procedures covering the measures to be taken in the event of accidents, fire and the like.
Until unsafe equipment is repaired and released for use, access by the public should be prevented. Information about accidents brought to
the attention of the manager should be recorded on a form that includes the following details:
a) date and tie of accident;
b) age and sex of victim and clothing worn, Including footwear;
c) equipment involved;
d) number of children on site at the time of the accident;
e) description of accident;
f) injury sustained including part(s) of body affected;
g) action taken;
h) witness statements;
i) any subsequent equipment modification;
j) weather conditions; and
k) any other relevant information.

GSWeb Playground Equipment E-mail) [e-mail]
Website) www.gswebplay.com
Tel) [phone]
Fax) [phone]
65, Saengnim-daero 259beon-gil, Saengnim-Myeon
Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea
THE BUTTERFLY MODEL NO.
GS-N201
Rev_0
2018.04
16
Maintenance
C. Routine maintenance
To reduce accidents, the owner or operator should ensure that an appropriate routine maintenance schedule is established, implemented and
maintained. This should take into account local conditions and the manufacturer's instructions that can affect the necessary inspection
frequency. The schedule should list the components to be maintained and should also give procedures for dealing with complaints and
breakdowns.
The routine maintenance of playground equipment and surfaces should consist of preventative measures to maintain their level of safety,
performance and compliance with the relevant part(s) of EN 1176. Such measures should include:
a) tightening of fastenings;
b) re-painting and re-treatment of surfaces;
c) maintenance of any impact attenuating surfaces;
d) lubrication of bearings;
e) marking of equipment to signify loose fill finished surface level;
f) cleaning;
g) removal of broken glass and other debris or contaminants;
h) restoring loose fills to the correct level; and
i) maintenance of free space areas.
D. Corrective maintenance
Corrective maintenance should include measures to correct defects, or th re-establish the necessary levels of safety of the playground
equipment and surfaces. Such measures should include:
a) replacement of fastenings;
b) welding of welding repairs;
c) replacement of worn or defective parts; and
d) replacement of defective structural components.
E. Personal safety
Repairs during operation that could put the safety of maintenance personnel of the public at risk, should be avoided.
F. Equipment alterations
Alterations to parts of a piece of equipment or structure that could affect the essential safety of the equipment should only be carried out
after consultation with the manufacturer or a compete person.