GT Racing GT890M User manual

PRODUCT MANUAL
2
3
1
4
1 Bluetooth Transmitter
2 Bluetooth Speakers
3 Recharge Cable
4Speaker Extension Cable
Connecting to smartphones and other devices:
1.Charge the Bluetooth transmitter with the charging cable for 3-4 hours. The LED
indicator will be red while charging and turns blue when fully charged.
2.Turn on the Bluetooth transmitter. The LED indicator glows blue and a voice
prompt says,"The Bluetooth device is ready to pair".
3.Activate the Bluetooth function on your phone and search for wireless devices.
Pair your phone to "GTRACING".
4.Once the pairing is successful you will hear a voice prompt,"Pairing complete".
5.If the connection is disconnected you will hear a voice prompt, "The Bluetooth
device is disconnected", and the device will be ready to pair again.
6.The Bluetooth transmitter will automatically turn off after 10 minutes when no
connection, or 30 minutes when music stops.
TECHNIQUE SPECIFICATION
CAUTION:
Power Input
Voltage
Battery Capacity
Watt-hour
Charging Time
Working Time
Wireless Streaming Range Distance
Support Mobile System
USB 5V
3.7V
1200mAh
2.22Wh
3-4 Hours
5-6 Hours
5m
Android / ios
1.Heat
The speaker should be situated away from heat sources such as radiators, heat registers,
stoves,and otherproducts (including amplifiers) that produce heat.
2.Water And Moisture
Do not use the speakers near water—for example, near a bath tub, wash bowl,kitchen sink,
or laundry tub,in a wet basement, and the like.
3.Cleaning
Do not use any type of furniture wax, benzene, insecticides liquid or aerosol cleaners. Use
a damp cloth for cleaning.
For more information, please visit our website: gtracing.com.
🅣🅤
🅥
gtracing.com

5pcs 1pcs
M5*8
8
BLUETOOTH
TRANSMITTER
CHARGING
CABLE
SPEAKER
EXTENSION
CABLE
RL
8
RM5*8
L
M5*8
8
M5*8
R
8
L
R
L
This device can play audio through bluetooth function.
Power
Note:The Bluetooth transmitter will automatically turn off after
10 minutes when no connection, or 30 minutes when music stops.
🅣 🅤 🅥
www.gtracing.com gtracing.com
gtracing.com