Guilin woodpecker medical instrument Endo radar pro User manual

Endo Radar Pro Endo Motor

INSTRUCTION MANUAL

Contents

1 Introduction........................................................................................... 1

2 Installation and setting .......................................................................... 6

3 Motor alone mode............................................................................... 15

4 Apex locator alone mode .................................................................... 18

5 Combined length determination mode................................................ 23

6 Trouble shooting ................................................................................ 25

7 Cleaning, Disinfection and Sterilization............................................. 27

8 Storage, maintenance and transportation ........................................... 36

9 Environmental protection ................................................................... 36

10 After service ..................................................................................... 36

11 European authorized representative .................................................. 37

12 Symbol instruction ........................................................................... 37

13 Statement .......................................................................................... 37

14 EMC-Declaration of conformity....................................................... 38

1 Introduction

1.1 Foreword

Guilin Woodpecker Medical Instrument Co., Ltd. is a high-tech

enterprise in researching, developing, and producing dental equipment,

and has a perfect quality assurance system, main products including

ultrasonic sealer, curing light, Endo motor, apex locator and ultrasurgery,

automatic water supply system etc.

1.2 Introduction

Endo Radar Pro is mainly used in Endodontic treatment. It is a

cordless endo motor with root canal measurement capability. It can be

used as a endo motor for preparation and enlargement of root canals, or

device for measuring canal length. It can be used to enlarge the canals

while monitoring the position of the le tip inside the canal.

Features:

a) Use efficient brushless motor, bringing lower noise and longer

service life.

b) Cordless portable endo motor with combined length determination.

c) The built-in high-capacity battery in the base is equipped with a

wireless charging system to ensure long enough battery life.

d) The contra-angle can be rotated for 360°.

1.3 Product conguration

1.3.1 Structure

Endo Radar Pro is composed of Motor handpiece, Contra-angle,

measuring wire, USB wire , Power adapter, etc...

1.3.2 Product accessories

Motor handpiece Contra-angle

Power adapter Base

Measuring wire File clip Lip hook Touch probe

Tester Lubricator

USB wire Protective silicon cover

Disposable insulation sleeves

1.4 Indications for use

Endo Radar Pro is a cordless endo motor with root canal

measurement capability. It can be used as a endo motor for preparation

and enlargement of root canals, or device for measuring canal length. It

can be used to enlarge the canals while monitoring the position of the le

tip inside the canal.

1.5 Range of application

1.5.1 The device can be used for preparation and enlargement of root

canals, or device for measuring canal length.

1.5.2 The device must be operated in hospital and clinic by the

qualied dentists.

1.6 Contraindications

In cases where a patient has been fitted with an implanted heart

pacemaker (or other electrical equipment ) and has been cautioned

against the use of small electrical appliances (such as electric shavers ,

hair dryers , etc ) it is recommended not to use the this device.

1.7 Device safety classication

1.7.1 Type of operation mode:

(1) Motor alone mode and Apex Locator alone mode: Continuous

operation

(2) Combined length combination mode:Non-continuous

operation(ON:1 minute(Max),OFF:1 minute(Min))

1.7.2 Type of protection against electric shock: Class II equipment

with internal power supply

1.7.3 Degree of protection against electric shock: B type applied part

1.7.4 Degree of protection against harmful ingress of water: Ordinary

equipment (IPX0)

1.7.5 Degree of safety application in the presence of a flammable

anesthetic mixture with air, oxygen, or nitrous oxide: Equipment cannot

be used in the presence of a flammable anesthetic mixture with air,

oxygen, or nitrous oxide.

1.7.6 Applied part: contra-angle, lip hook, file clip, touch probe,

protective silicon cover.

1.7.7 The contact duration of applied part: 1 minute.

1.7.8 The temperature of the surface of applied part may reach 45℃.

1.8 Primary technical specications

1.8.1 Battery:

Lithium battery in base: 11.1V/2600mAh

Lithium battery in motor handpiece: 3.7V/1200mAh

1.8.2 Power adapter:

Input: ~100V-240V 50/60Hz 800mA

Output: DC15V/1.6A

1.8.3 Torque rang: 0.4Ncm~5.0Ncm(4mNm~50mNm)

1.8.4 Speed rang: 100rpm~2500rpm

1.8.5 The contra-angle uses precision gear transmission inside, and

the gear ratio is 6:1 (Model: CA161)

1.8.6 First release of software: V1

1.9 Working environment

1.9.1 Environment temperature: +5℃~+35℃

1.9.2 Relative humidity: 30%~75%

1.9.3 Atmosphere pressure: 70kPa~106kPa

1.10 Warnings

1.10.1 The device must only be used in suitable locations and only by

specialized physicians licensed to practice dentistry.

1.10.2 Use the specied battery for this device. Never use any other

batteries.

1.10.3 Do not expose the device to direct or indirect sources of heat.

Operate and store the device in safe environment.

1.10.4 The device requires special precautions as regards

electromagnet compatibility (EMC) and must be installed and

commissioned in strict conformity with the EMC information provided

in this instruction manual. Specifically, do not use the device close to

uorescent lamp, radio transmitters and remote controls.

1.10.5 Long time use of the device will lead to overheating of the

micro motor, let it cold down that use. If the motor handpiece overheats

too persists, contact your distributor.

1.10.6 The USB port of the base must only be connected to USB port

of the handpiece through the USB wire. Never use it for other purposes.

1.10.7 Over-heat scorching: the handpiece cannot be used for 10

minutes continuously.

Contra-angle

1.10.8 Only use the original contra-angle. Do not use any other

contra-angle or other reduction rate other than original one.

1.10.9 Never press the contra-angle push button when the motor

handpiece is running or if it is coming to a stop. This will lead to

detachment of the instrument or cause the pushbutton to overheat.

1.10.10 Never remove the contra-angle from the motor handpiece

during operation.

1.10.11 Only use undamaged root canal instruments. Please refer to

the information provided by the manufacturer.

1.10.12 Only insert the instrument when the contra-angle is

stationary.

1.10.13 Never place your fingers on the moving parts of the

instrument while it is running or coming to a stop.

1.10.14 Before treatment, check the contra-angle for any damage or

loose parts.

Root canal instruments

1.10.15 Before use, make sure the instrument is securely locked in

place.

1.10.16 Never use continuous rotary instruments in Safety Glide Path

mode.

1.10.17 Never use Safety Glide Path instruments in rotary mode.

1.10.18 Use the torque and speed settings recommended by the

instrument manufacturer.

1.10.19 Replacement of lithium batteries by inadequately trained

personnel could result in a HAZARD,so please contact local distributors

to replace the battery if necessary.

1.10.20 The adapter plug can be used to disconnect from the network

power supply.Don't position the device to make it dicult to operate the

disconnection device.

2 Installation and setting

2.1 Reset function

Use the needle to push the internal button for more than 3 seconds

to complete the reset by the reset hole indicated by the arrow below, to

solve the accidental crash of the base or accidental failure of the touch

button.

2.2 Installing and removing the contra-angle

2.2.1 Installing

Align any locating pin of the contra-angle with the positioning slot

on the motor handpiece and push the contra-angle horizontally. The

three locating pins on the contra-angle are inserted into those three

positioning holes on the motor handpiece. A “click” sound indicates that

the installation is in place. The contra-angle can be rotated 360° freely.

The contra-angle is free to rotate, adapting to the root canal of

different positions, and it is convenient to watch the screen when

operating.

2.2.2 Removing

When removing the contra-angle, pull it straight out.

When inserting and removing the contra-angle, turn the motor

handpiece power o beforehand.

2.3 Installing and removing the protective silicon cover

2.3.1 Installing

Put the protective silicon cover onto the contra-angle.

2.3.2 Removing

When removing the protective silicon cover, pull it straight out

slowly.

2.4 Inserting and removing the le

2.4.1 Inserting

Insert the le into the chuck until it stops.

2.4.2 Removing

Press the push-button and pull out the le.

When inserting and removing the file, turn the motor handpiece

power o beforehand.

2.5 Installation and removal of disposable insulation sleeves

2.5.1 Installation

Before each use of the handpiece and after the handpiece is cleaned

and disinfected,put on a disposable isolation sleeve. Take the isolation

sleeve out of the isolation sleeve box, then insert the isolation sleeve into

the motor handpiece from the thin end of the handpiece, and install the

isolation sleeve until there is no obvious wrinkle.

After installing the disposable isolation sleeve, wrap the barrier lm

around the handpiece surface. After that, clean and disinfect the surface

of the handpiece. Refer to Chapter 7.3 for cleaning and disinfection

procedures.

2.5.2 Removing

After each use, remove the barrier lm and slowly pull the isolation

sleeve from the thin end of the handpiece.

Warming: Isolation sleeves are not reusable.

2.6 Touch button of base(Motor alone mode)

1 POWER Power on or power o

2 AUTO REV Automatic protection mode

3 REV Forward or reverse

4 En-Ap The mode button

Table of contents

Other Guilin Woodpecker Medical Instrument Dental Equipment manuals