Gulfstream VIENNA BENCH User manual

© 2017 All rights reserved. Design and Specifications are subject to change without notice.
SINGLE, DOUBLE, TRIPLE
VIENNA BENCH
ASSEMBLY INSTRUCTIONS

VIENNA BENCH ASSEMBLY INSTRUCTIONS 1
Important Safety Instructions
Obey the following warnings:
• Keep by standards and children away from the product you are assembling at all times.
• Do not connect power supply to the machine until instructed to do so.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly
steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this unit. This could compromise the safety of this unit and
will void the warranty.
• Do not use until the unit has been fully assembled and inspected for correct performance in accordance
with the Owner’s Manual.
• Read and understand the complete Owner’s Manual supplied with this machine before first use. Keep the
Owner’s and Assembly Instructions for future reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or malfunctioning of the
machine.
Included Hardware for Double Bench
2” Bolt
(Quantity: 15)
3 extra
T-Nuts
(Quantity: 3)
2³⁄8 Bolt
(Quantity: 35)
3 extra
Allen Key
(Quantity: 1)

1
2
7
4
5
6
3
1A
3A
VIENNA BENCH ASSEMBLY INSTRUCTIONS 2
Position unit 2 into correct area and attach unit 1 and 3.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 3
Easy access for plumbing with the removable toe kick.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 4
2”
Bolt
2”
Bolt
1
2
7
The hardware to install units is found in the storage drawer (7).
Six 2” bolts are needed to install (1) and (2). 2” bolts go from sink side to step. T nuts on inside.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 5
2”
Bolt
1
2
3
Install the final side (1-2) and (3) on Vienna Bench to the center console.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 6
1
2
3
Check front fully assembled and secure.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 7
4
1
2
3
7
Place (4) the backrest to (1), (2) and (3) units. The hardware to install units is found in the storage drawer (7).

VIENNA BENCH ASSEMBLY INSTRUCTIONS 8
7
2 ³⁄8”
Bolt
Attach (4) backrest to (1), (2) and (3), with 32 bolts for a double unit and 15 for a single unit (2 ³⁄8” bolts).
The hardware to install units is found in the storage drawer (7).

VIENNA BENCH ASSEMBLY INSTRUCTIONS 9
5 6
1A
3A
The massage wire on Vienna Seats must be fed through hole on (1A) and (3A).
The massage wires found under the seats (5) and (6).
The seats are velcroed, so make sure it is attached properly and securely.

VIENNA BENCH ASSEMBLY INSTRUCTIONS 10
The electrical components to be hooked up in accordance with the owners manual.

Gulfstream Inc.
Cambridge, Ontario, Canada N1R 5X5
Tel.: [phone]
Fax: [phone]
Manufacturer of Luxurious Pedicure Spas,
High Quality Salon and Spa Furniture.
© 2014 All rights reserved. Design and Specifications are subject to change without notice.