GutterMate Finia 650 User manual

Finia 650 Water Reservoir Step by Step Guide
On how to install a Small Pebble Pool using the Finia 650
Above is an image of a finished pebble pool.
Step 1
Make sure your Finia is Level. Using a Spirit Level is recommended.
Step 2
If you do need to level the base - then use a small amount of sand and cement until its level all the
way round.
Step 3
The base can be disguised with rockery stone, a 12" long log roll, or pot plants.

Step 4
If you are constructing a simple pebble pool place the pump in the middle of the Finia with the tube
extending through the lid. Add the lid and fill with water.
Step 5
Arrange the decorative stone around the fountain top to disguise the lid and Finia base.
Step 6
Adjust the height of the fountain so that it does not splash outside the container.
Note - Make sure all electrical cables are adequately protected, connections are water proof and the
whole electrical installation is safe. If in doubt consult a qualified electrician.