GWL GWL/Modular-BCC User manual
www.gwl.eu
Module descripon
Potenal use:
Technical Specicaons
www.gwl.eu
www.gwl.eu
Installa on
the pin closer to the edge of CPM will be connected to the pin of
BCC which is also closer to the edge.
CPM + BCC
adapter + BCC
www.gwl.eu
www.gwl.eu
REBOOT SETTINGS
RESET RELAYS
UMIN APPLY
UMAX APPLY
STOP
www.gwl.eu
Example:
Take the utmost care when operang the Uemergency terminals manually. If you manually close
terminals 1 – 3 on the Uemergency terminal block aer they‘ve been opened by the Umin or Umax
event, they will never open again and the baery will discharge/overcharge over me and be
destroyed.
www.gwl.eu
IP adress:
Mask:
Default gateway:
Outputs xml le
DNS server 1:
TCP port:
Time zone:
DNS server 1:
Watchdog URL:
Wed Jul 15 09:29:07 2020
Actual me:
N/A
Watchdog status:
NTP server:
HTTP port:
FREE ACCESS bcc.xml le
Enable get le from URL
Watchdog download period: seconds
API server:
URL:
API PORT:
Admin user:
Firmware Upload:
Interval:
Password:
API HTTP GET enable:
Choose a le Start upload
Relay 1:
DIFF voltage:
OFF
ON
ON
Relay 2:
OFF
ON
ON
• • • • • • • •
BACK SAVE &BOOT
SW
SW
Remove user name and password
www.gwl.eu
CAUTION
CAUTION
www.gwl.eu
Value in XML: Explanaon of meaning:
www.gwl.eu
Value in XML: Explanaon of meaning:
www.gwl.eu
CAUTION
www.gwl.eu
Switch to ON when baery voltage is> 12800 mV and switch to OFF when baery voltage is <13200
mV.
Example of correctly entered condion:
www.gwl.eu
Example of called URL:
www.gwl.eu
www.gwl.eu
Examples of using the BCC unit
GWL/BCC
GWL/CPM V1.8
www.gwl.eu
Relay no. 2 was setup as follows:
Switch to ON when baery voltage is < 12400 mV and switch to OFF when baery voltage is > 14000 mV.
GWL/BCC
GWL/CPM V1.8
www.gwl.eu
Set the logic of Relay 1 to:
GWL/BCC
GWL/CPM v. 1/8
www.gwl.eu
General and safety instruc ons:
This manual suits for next models
1
Table of contents
