H-KING Sky Sword User manual

08
01
Box Contents

,
Installed
Installed
Installed
EDF jets require Li-PO batteries with a high discharge rating (C rating) for increased safety and
Attention
optimal performance.We recommend using lI-Po batteries with a minimum of 40C or above.
1200mm
1600mm
6S 3200g
90 mm EDF
Brushless Outrunner Motor,3541/1550KV(6S)
Required to Complete
FLY COLOR 100A Pro Brushless ESC
Required to Complete
(with 7A UBEC)
Servos:(twin bearings,metal shell and
digital servos)12g*8pcs
Battery:6S 5000mAh 40C Li-Po
Radio System:2.4GHz 6CH
Transmitter and Receiver
Main gear retract unit Front gear leg only Left main gear leg Right main gear leg
Wheel Set x 3 Landing gear shafts Steering servo fixture wing plugs and wires
Landing gear control board
Main wiring box Landing gear covers Fixture for nose gear
Fixture for main
landing gear

PA2.6*10MM 2pcs
Fixed with screws
PM3*8MM 4pcs
Fixed with screws Assembly of your Sport Jet is
completed. Now perform a final
check on all screws, bolts and
components, ensuring all are
secure and firmly in place.
Plug the nose part to the fuselage.
Fuselage(orange) Nose Cone(orange)Left Wing(orange)Right Wing(orange)
Tail and elevator(orange) Fuselage(blue) Nose Cone(blue)Left Wing(blue)
Right Wing(blue)
Tail and elevator(blue)
Carbin Fibre wing spar Screw Set
Nose Landing Gear Set Left main landing
gear complete Right main landing gear complete
Nose Wheel retract unit

06 03
Elevator
Rudder
Ailerons
The Rudder
The front
wheel steering
The Rudder The front
wheel steering
Horns Arms
More control throw Less control throw
Control Horn and Servo Arm Setting
CG LOCATION
CG:140mm
-10mm
+10mm
-10mm
+10mm
-10mm
+10mm

e
*
0504
Small
Big