
3 H3C S3600
function enablessupplicantsystemsthatare not authenticated to
accessspecificresourcesand thusperformthe corresponding
operations,suchasobtaining the802.1xclient,upgrading the
client, orobtaining other upgrading programs.
uThe S3600Seriescanalsopreventunauthorizedaccess tothe
network bybinding anycombinationof MAC,IPand PORT.
DiversifiedSystem Configurationandmanagementmodes
uThe S3600 SeriessupportsSimpleNetworkManagement
Protocol(SNMP)v1/v2/v3and RMON(RemoteMonitoring) v1,
1/2/3/9groupsofMIBs.Thesecan be managed byageneral
networkmanagementplatformsuchas OpenView,and H3C iMC
network managementsystem.
uThe S3600SeriessupportsCommandLineInterface(CLI),Web
based networkmanagement,modemdial-up andTELNET,all of
whichmakethe equipmentmanagementmore convenient.
uThe S3600 SeriessupportsHGMPV2cluster management.After
enabling HGMP V2,thenetworkadministrator can manage
severalmember switchesthrough one commandswitchandonly
the command switchneedsapublicnetworkIP address. Thiscan
add up tolarge publicIPaddresssavingsand alsocontributes
significantlytomore effectivenetworkmanagement.
AbundantSystem Maintenance and debuggingmethods
uThe S3600SeriessupportsDLDP(DeviceLinkDetection
Protocol).DLDPcan detect thelinkstatusofthe opticalfibercable
or copper twisted pair.IfDLDPfindsaunidirectionallink,it
disables the related portautomaticallyor informs users todisable
itmanuallydepending on thespecificconfiguration,toavoid
potentialnetwork problems.
uThe S3600 Seriessupports Loopbackdetection onports.After
usersenableloopbackdetectionforEthernetports,theswitchwill
monitor whether theportshaveloopbackon aregular basis.Ifthe
switchdetects loopbackfor aparticular port,then itwill putthat
port under control.
uThe S3600 Seriessupports VCT(VirtualCableTest),convenient
for troubleshooting.Customerscan startthevirtualcabletest
(VCT)tomakethesystemtest thecableconnected tothecurrent
electricalEthernet port. Thetest items include:whether ashortor
open circuitexists inthe Rx/Txdirectionofthe cable,and the
lengthofthecableinnormalstatusorthelengthfromtheportto
the fault point ofthe cable.
Specifications
Port Configuration
S3600-28P-PWR-SI/S3600-28P-
PWR-EI S3600-28TP-SI
S3600-52P-PWR-SI/
S3600-52P-PWR-EI S3600-28F-EI
Fixed ports (1) 24 10/100 BASE-TX
Ethernet ports ;
(2) 1 console port
(1) 24 10/100
BASE-TXEthernet ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port
(1) 48 10/100
BASE-TX
Ethernet ports;
(2) 1 console
port
(1) 24 100BASE-FXSFP ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port
Extended Ports 4 1000M SFP
extended ports 2 1000M SFP extended ports 4 1000M SFP extended ports 2 1000M SFP
extended ports
Extended Module
(1) SFP-GE-T
(2) SFP-GE-SX(850nm, 0.55km)
(3) SFP-GE-LX(1310nm, 10km)
(4) SFP-GE-LH40(1310nm, 40km)
(5) SFP-GE-LH40(1550nm, 40km)
(6) SFP-GE-LH70(1550nm, 70km)
(7) SFP-GE-LH70-CW(1470nm, 70km)
(8) SFP-GE-LH70-CW(1490nm, 70km)
(9) SFP-GE-LH70-CW(1510nm, 70km)
(10) SFP-GE-LH70 -CW(1530nm, 70km)
(11) SFP-GE-LH70 -CW(1550nm, 70km)
(12) SFP-GE-LH70 -CW(1570nm, 70km)
(13) SFP-GE-LH70 –CW(1590nm, 70km)
(14) SFP-GE-LH70 -CW(1610nm, 70km
(1) SFP-GE-T
(2) SFP-GE-SX(850nm, 0.55km)
(3) SFP-GE-LX(1310nm, 10km)
(4) SFP-GE-LH40(1310nm, 40km)
(5) SFP-GE-LH40(1550nm, 40km)
(6) SFP-GE-LH70(1550nm, 70km)
(7) SFP-GE-LH70-CW(1470nm, 70km)
(8) SFP-GE-LH70-CW(1490nm, 70km)
(9) SFP-GE-LH70-CW(1510nm, 70km)
(10) SFP-GE-LH70 -CW(1530nm, 70km)
(11) SFP-GE-LH70 -CW(1550nm, 70km)
(12) SFP-GE-LH70 -CW(1570nm, 70km)
(13) SFP-GE-LH70 -CW(1590nm, 70km)
(14) SFP-GE-LH70 -CW(1610nm, 70km)
(15) SFP-FE-SX(1310nm, 2km)
(16) SFP-FE-LX(1310nm, 15km)
(17) SFP-FE-LH40 (1310nm, 40km)
(18) SFP-FE-LH80 (1550nm, 80km)