1) Store your sweeper the way all of it's brushes are not in contact with sorround objects to
avoid the bent of brushes.
2) Have the height adjustment set on highest possible setting in the highest functional positi-
on. Set the lover brush setting only in case when bristles are far from reaching the sweeping surface.
Temporarly lowering of brushes will create higher preasure on brushes an can be required for swee-
ping some of surfaces or debri. Lowering of brushes ( increesing of brush preasure) should be tem-
porarly only to clean certain areas.
3) Increase the preasure on push handle to lift up the front wheels (brushes) when crossing
small steps or step like horizontal obstacle. Repeating impact into sharp surface steps can demage
the front wheel pivot housing and gearing further on.
4) Stop to use the sweeping machine Immediately when sweeper stops to run smoothly. Dis-
connect the
waste bin and look for brushes blockage. To clean the machine and loosen the brushes will help in
most cases.
5) When needed to replace brushes, wheels or by any other maintenence when front wheel
needed to be pulled out of the machene make sure the height setting is set in the service position (
height setting to Nr.8 ) and wheel is pulling out in the upright position ( position that the machine s
operating in )
See detailed Haaga sweeper info, spare parts and service instructions at:
www.HaagaService.com
Please read carefully the HAAGA SWEEPER USER MANUAL before using the HAAGA SWEE-
PER.
1) Always only use fully functioning Sweeper. In case you need to replace any spare part you
will find it at: www.HaagaService.com
2) Haaga Sweeping machine is not meant for sweeping liquid.
3) Do not sweep any burning or in flame debris, such as a smoldering cigarette butt etc.
4) Use a durable gloves when removing sharp objects from the Haaga Sweeper when clea-
ning or maintaining.
5) Haaga Sweeper is not meant for sweeping health hazard materials.
