HABITECH RIVI RV65 Specification sheet
Package Contents
A complete RV65 installation package includes all of the items
listed below:
•RV65 Access Point
•One wall-mount anchor kit, including two 1" No. 8 steel pan
head Phillips sheet metal screws and wall-mount anchors.
•One external T-bar bracket (two unassembled parts)
•Declaration of Conformity/Regulatory Statement
•This Quick Setup Guide
Unleashed Network Configuration
Setup Using the Unleashed Mobile App
To perform setup using the Unleashed Mobile App, download the iOS
or Android app from the app store.
1. As soon as the Unleashed AP is powered on and connected to the
local network, it boots up and begins broadcasting a temporary
unencrypted WLAN named “Configure.Me-[xxxxxx]” from both
radios.
2. Using your client’s Wi-Fi connection settings, select and associate
to the “Configure.Me-[xxxxxx]” WLAN.
3. Launch the app, and follow the on-screen instructions to
configure your Unleashed network(s).
FIGURE 2 Unleashed Mobile App for iOS and Android
FIGURE 3 Configuring Unleashed from the Mobile App
Setup Using a Web Browser
1.
2.
As soon as the Unleashed AP is powered on and connected to the
local network, it boots up and begins broadcasting a temporary
unencrypted WLAN named “Configure.Me-[xxxxxx]” from both
radios. Using your client’s Wi-Fi connection settings, select and
associate to the “Configure.Me-[xxxxxx]” WLAN.
3. Launch a web browser and enter the following into the browser’s
URL bar: unleashed.rivinetworks.com, and press Enter.
4. You will be redirected to the Setup Wizard. Complete the steps in
the Setup Wizard and click Finish.
FIGURE 4 Complete the Setup Wizard to set up your
Unleashed network
5. Once the Setup Wizard is finished, a “Configuring system settings
and rebooting” progress screen appears. Wait until the process is
complete.
6. Connect to the WLAN that you configured in the Setup Wizard,
and click OK to reconnect. You will be redirected to the Unleashed
login screen.
7. Enter your Admin Name and Password to login.
Page 1 of 3
RV65
Access Point Quick Setup
Guide
This Quick Setup Guide provides step-by-step instructions on how to
set up your RV65 access point. After completing the steps in this
guide, you will be able to place the access point (AP) at your site and
provide wireless network access to users.
FIGURE 1 RV65 - Top
Before You Begin
Before deploying please check for the latest software and the
release documentation on our online portal.
© 2022 RIVI Networks Ltd. All rights reserved. Trade
Mark No: UK00003636458 Published Jan 2022,
Part Number 800-72625-301 Rev A
Scan here for IOS app Scan here for Android app
FIGURE 5 The Login page
8. Upon successful login you will be presented with the Unleashed
Dashboard, which displays an overview of your Unleashed
network.
Mounting Instructions
Mounting on a Drop-Ceiling T-Bar
The factory-supplied T-bar mounting assembly kit allows you to attach
the AP to recessed and flush drop-ceiling T-bars.
1. Position the studs on the bottom of the T-bar bracket (1 in Figure
3) in the keyholes on the AP enclosure.
2. Slide the T-bar bracket away from the Ethernet ports on the
bottom of the AP until the AP retainer tab snaps into place,
trapping the T-bar bracket studs in the keyholes (2 in Figure 3).
FIGURE 6 Attaching the T-bar Bracket to the AP
3. Insert the locking tab (3 in Figure 3) so it is in the first position on
the T-bar bracket (1 in Figure 3).
4. Gently push the ceiling tiles, if present, up and out of the way.
5. Position the T-bar bracket so its two clasps grip one edge of the
T-bar (1 in Figure 4). Make sure that both clasps are gripping the
T-bar.
6. Hold the AP in place and gently push the locking tab (2 in Figure 4)
until its clasp grips the other edge of the T-bar. Make sure that all
three clasps are gripping the T-bar.
FIGURE 7 Attaching the T-bar Bracket to the T-bar
Mounting on a Flat Surface
The factory-supplied mounting screws and plastic wall anchors allow
you to attach the AP to a wall or other flat surface.
1. Use the Mounting Template on the last page of this Quick Setup
Guide to mark the locations for two drill holes on the mounting
surface.
2. Use a 4.75-mm (3/16-in.) drill bit to drill holes approximately 25
mm (1 inch) deep into the mounting surface.
3. Insert the factory-supplied anchors (1 in Figure 5) and mounting
screws (2 in Figure 5) into the mounting surface, leaving
approximately 6 mm (1/4 inch) of the screw heads protruding for
the AP enclosure.
FIGURE 8 Flat Surface Mounting
4. Place the AP onto the mounting screws so the screw heads enter the
keyholes on the AP enclosure, and push the AP down until the
AP retainer tab snaps into place.
Page 2 of 3
© 2022 RIVI Networks Ltd. All rights reserved. Trade
Mark No: UK00003636458 Published Jan 2022,
Part Number 800-72625-301 Rev A
Page 3 of 3
© 2022 RIVI Networks Ltd. All rights reserved. Trade
Mark No: UK00003636458 Published Jan 2022,
Part Number 800-72625-301 Rev A
