Haier AS122AKBHA User manual

OFF
1
2
3
5
6
14
15
16
17
13
12
11
10
9
8
7
1. Mode display
COOL
DRY
HEAT
2. HEALTH display
3. FAN SPEED display
4.TIMER MODE display
OFF:The air conditioner stops operation
after the designed period.
ON:The air conditioner starts operation
after the designed period.
5. HEATHY BUTTON
Press the "Healthy" button once " "
is displayed now the air conditioners is
operating the healthy function.
Press the "Health" button again then the
healthy operation stops.
6. MODE
Used to select COOL,DRY,HEAT operation.
7.TIMER
8. CODE
Used to select code Aor B with a press,
A or B will be displayed on LCD.Please
select A without special esplanation
9. RESET
Used to reset the controller back to
the normal condition.
10. CODE display
11. SINGNAL SENDING INDICATOR
Lights up when asignal is sent to the unit
12.LOCK display
13.TEMP.display
14. DESIGNATED PERIOD diplay
15. POWER/SOFT display
16.TEMP.
Used to select your desired temp.
17. POWER ON/OFF
Used for unit start and stop.
18. FAN
Used to select fan speed LO,MED, HI,AUTO.
19. SWING
Air flow direction can be changed by each press
20. POWER/SOFT
Used to select power or soft mode operation.
21. LOCK
Used to lock buttons and LCD display.
ion
Brief Introduction to Health Operation
The anion generator in the air conditioner can generate a lot of anion to effectively balance the
quantity of posion and anion in the air and also to kill bacteria and speed up the dust sediment
in the room and finally clean the air in the room.
Notes: When the fan in the indoor unit does not work, the health lamp lights up, but the
anion generator does not release anion.
If the unit which you purchased has healthy function, Remote controller should
like the following figure: (The introduction in this book about the remmote con-
troller has no an example for the once with healthy function.)
LOCK
RESET CODE
MODE SWING
POWER/SOFT
TIMER
A
HEALTH FAN
B
i
on
TEMP
ON
OFF
18
19
20
ON
H
4
21