Haier HWF05XC7-E 5,200 User manual

Haier
What The World Comes Home To T"
RoomAir Conditioner
ClimatisetiondePiece
AcondWonedorDeAim
HWF05XC7
HWF05XCT-2
UserMen_W
Men_eiJ'_gi#ati_n
Man_WddUs io
Readinstrudiunsbeforeinstalling.
Cuff1-877-337-3639furquestiunsonpartsandservices.
Lifelesinstructionsnventdepruc_der_I'instelletlum
Pourroutesquestionsconcernent/espi_ceset I'entretien,cumpusezle 1-877-337-3639.
Lea}asInstrucciouesentesdeiustuJurelupurutu
001 055301 2 U_meuosul _-877-337-3639si tienepreguutassubrerepuestosuservicios

Thank you for buying a dependable, energy-saving and easy-to-operate
HALERroom air conditioner. This manual contains useful information for
you to maintain, operate, install and safely use your room air conditioner.
Your air conditioner cleans, cools and dehumidifies the air in your room to
provide you with the ultimate level of comfort.
Pleaseread instructions carefully before using the product. Also, do not
forget to fill out and mail the Product Registration Cord.
Record Your Model and Serial Number.
Forall your servicecalls during thewarranty period, thefollowing
informationwill be needed.Attachthe sabs receiptto thisguide and keep
for futurereference.Thisinformationcan be obtainedfrom theserialplate,
which ison your air conditioner.This iseitheron thecabinet (sideor back),
or you may haveto removethefront grilb to locateit.
Model Number: ..............................................................
Serial Number: ...............................................................
Date of Purchase: ...........................................................
Dealer's Name: ..............................................................
Deabr's Address: ............................................................
Deabr's Phone Number: ...................................................
TABLE
RECEPTACLE AND FUSE TYPES
RATED VOLTS 125/60 250/60
AMPS 15 20 15 20
FUSE SIZE IS20* IS20* 30
TIME DELAY FUSE
(or clrcui_ braker) Plug Plug Plug

SAFETYPRECAUTIONS
WARNING: Following these basic precautions will reduce the
risk of fire, electrical shock, injury or death
when using your air conditioner.
1)The air conditioner must be connected to a proper electrical outlet with
the correct electrical supply. (see table)
Proper grounding must be ensured to reduce the risk of shock and fire_
DO NOT CUT OR REMOVE THE GROUNDING PRONG. If you do
not have a three-prong electric receptacle outlet in the wall, have a
certified electrician install the proper receptacle. The waJJreceptacle
MUST be properly grounded.
Do not use if the power cord is frayed or otherwise damaged.
Also, avoid using it if there are cracks or abrasion damage
along the length, plug or connector.
4) DO NOT USEAN ADAPTER OR AN EXTENSION CORD.
When installing your air conditioner in a window, make sure the window
is strong enough to hold the weight of the air conditioner. You also want
to secure and install your air conditioner properly to prevent it from
falling_ Extra brackets and/or support may be required depending on
your window.
6) Do not block the airflow inside or outside the air conditioner with blinds,
drapes, protective covers, shrubs or bushes.
7) Be careful of sharp edges on the front and rear fins of the unit that could
cut and cause serious injury.
8) Be careful when lifting the air conditioner to install or remove the unit.
Always use two or more people for this.
9) Always unplug the air conditioner before servicing it or moving it.
2

PAGE
A Ward From Haier 1
Product Reglstrofian 1
Safety Precautians 2
Warnings 4
Electrical Safety 4
Tips 5
Energy Saving Guide 5
Features 6
Operating Guide 7-8
Normal Operating Sounds 7
Operating instructions 7-8
insta|latians 9-13
PartsSupplied 1g
Tools I g
Stepsfor Installation
Clean and Care Guide
Troubleshaoting
Warranty infarmatian
11-13
14-15
15-16
17
3

Followingthesafetymessagesisveryimportant.
Thesemessagescansaveyoufrombeinginjuredorkilled.
Warning symbols alert you to be careful and mean Danger. Always
follow instructions to be safe and reduce chances of injury or death.
Warning and Danger signs will precede safety messages,
Grounding:
WARNING:
Thisroom air conditioner mustbe grounded.
Grounding reducesthe risk of electric shockby
providing an escapewire for the ebctric current.
Thepower cord has a grounding wire with a
grounding plug. Pbg it into an outbt that is
properly instalbd and grounded.
improper use oFthe grounding
plug can result in a risk of electric shock.
Call a qualified ebctrician if you don't understand
the grounding instructions,or if you are not
sure if the air conditioner is properly grounded.
if the wall outlet is not grounded, phase contact an
electrician to have it replaced with a properly
grounded outlet.
r)o not, under any ¢ircums|'onces, cut or remove the
third (ground) prong from the power cord.
We strongly advise against using an adapter plug.
Testpower plug before each use:
1. Press"reset" button.
2. Press"test" button. Unit should trip.
3. Press"reset" button again for use.
Do not use if above test fails.
if this device trips, the cause of the malfunction must
be corrected before further use of the device.

®
®
0
®
This air conditioner is designed for use in a double hung window.
While installing unit be sure to tih air conditioner 5degrees ou_ard to
have the water drip outside the house.
Install the unit on the north side,as that is normally the shaded side. This
wiJJenhance the operation of your unit.
The window has to be strong for installation. Extra brackets and/or
support may be required depending on your window. (Bracketsand
supports not induded in all models.)
Measure the window before installing, if the window is too big for the
unit you may require professional installation.
Use the correct ebctric voltage and proper ampere for the unit to run
effectively.
Only bt a certified electrician modify to your ebctrical outlet.
Use a dedicated line for the operation of your air conditioner to avoid
the possibiJityof an eJectrical surge.
• When installing your air conditioner, make sure to seal all areas where
there is a possibility of air bakage.
• The airflow should not be blocked, either inside by curtains, drapes or
furniture,or outside by shrubs or bushes.
• Do not needbssly use an ebctrical light or other appliances that
produce heat.
• Keep the blinds and drapes drawn on all other windows.
• While cooking, use an exhaust fan in the kitchen to remove the excess
heat.
Always usethe correct BTU size air conditioner to cooJthe room to
attain optimum efficiency.
5

easy
access 2-way contrd
filters panel
MODEL: HWF05XCT,HWF05XCT-2
1.Temperature Set Knob
This knob adjusts the temperature of the air,--
The higher the setting the cooler the air
temperature. With this knob you can setthe
temperature to your desired comfort level,
min.cod being the warmestand max.cool being
the coldest.
2.MODE Set Swithch
With this knob you can control the fan speed
as well as the cooling speed. You have 2 Fan
speeds to choose from: HI and LO.
3. 2-Way Air Flow
The air directional louvers Jetyou control the
direction of the airflow to the desired direction.
The airflow can be directed right side-Jeff side.
4. Window Install Kit
This kit enables you to installthe air conditioner
in a double hung window. Extrabrackets or
support may be needed, depending on your
window.
5. How The Unit Drains
On humid days with the air conditioner in use,
moisture may collect on the pan or the bottom
of the air conditioner. If the unit is positioned
properly, the moisture will gather towards the
back of the unit.This will not affectthe operation
of the unit and the moisture will evaporate in
time. Occasionaly the moisture will flow over
the back of the pan, but this will not affect the
operation of the unit. Never drill holes in the
pan under any circumstance.

NormaJ Operating Sounds
The following soundsare normally heard during the operation of an air conditioner,
• Thermostatdicks. As the thermostatcycleson/off you will
hear this sound.
•Cool airflow movementas dictated by the setfan speed.
•Water sounds.This is normal sinceyour air conditioner also actsas a
dehumidifier. Thusyou will hear water soundsfrom water drops
falling on thecondenser.
•As the refrigerant flows through the inner seabd tubing,a
rushing noisemay occur.
•Rattlingor vibrating noisesmay be heard due to poor wall
or window installation.
High pitch compressorsound may be heard.
Operatin 9 Instructions
5 6
| 7
9SPEED
HI LOW
10
MIN MAX [
COOL COOL
FAN ONLY
Wait 3 Minutes Before POWER
Restarting L_
ON OFF

After installing your air conditioner, plug it into the proper
electrical outlet in the wall.
POWER Turnsair conditioner off.
SPEED "LOW" Low speed fan operation with optional cooling.
SPEED "Hi" High speed fan operation with optional cooling.
This automatically controls the temperature of indoor air. Turnthe knob
so that the arrow points to the cooler marks for more moderate cooling.
Normal Fan
1. Turn the SPEEDmode switch to the "Hi" or the %OW" setting.
2. Setthe thermostat contrd to the temperature mark "FAN ONLY".
Normal cooling
1. Turn the SPEEDmode switch to the "Hi" or the "LOW" setting.
2. Setthe thermostat control to the desired temperature.(The mid-point
isa good starting position.)
ifthe room temperature is not satisfactoryafter a reasonable time, adjust
the contrd to a warmer setting, as appropriate.
Maximum cooling
1. Turn the SPEEDmode switch to the "HI" setting
2. Setthe thermostat contrd to the MAX COOL temperature mark.
Quieter operation
1. Turn the SPEEDmode switch to the "LOW" setting.
2. Setthe thermostat control as needed.
CAUTION:
1) Remember the compressorof your air conditioner will not work
when the temperature goes below 65°F.
2)When you shut off the air conditioner wait for 3 minutes
before turning it on again. This is the compressorcycle time.
3) If you have any trouble in operating your air conditioner,please refer to
theTrouble Shooting section.

Beforeyouinstallyourairconditioner,checkthefollowing:
1}The unit is free of ail obstructions inside and outside the room,e.g, drapes,
curtains, furniture, plants, shrubs,bushes,trees,other structureslike buildings,
garage,etc. The air conditioner musthavea dear, unobstructed airflow through
the condenser to remove heat.
2) Thewindow is strongenough to hold theweight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
(Bracketsor supports not provided in all models)
3) Thewindowsill and track are strong enough to hold the weight of the
air conditioner.
4) Thewall is strongenough to hold the unit. Extra bracketsor supports may be
needed depending on thewall. (Bracketsor supports not provided in all models)
5) There isadequate and proper power supply near the air conditioner.
_6) Be careful of exposed sharp edges of the cabinet and sharp coils (fins) on
the back of the unit that could cut and cause serious injury.
,_7) DO NOT useadapter plugs.
_,8) DO NOT useextensioncords.
_k9) DO NOT cut or remove the ground prong.
_l_ 10) DO NOT modify the plug or the ebctrical wall outlet in any way.
if pbg does not fit the ebctrical outbt have a certified ebctrician do the
necessarychange.
_1_,1] ) DO NOT connectebctricaJ power to the unit before installation.
_kl 2) DO NOT useif power cord is worn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along the bngth,
plug or connection.
_,13) DO NOT install into any existing cabinet or sbeve which does not have side
and top air vents. g