Haier 10552537 User manual

No, 0010552537
HSU-07HV03/R2(DB)
HSU-09HV03/R2(DB)
HSU-09HV03/R2(SDB)
HSU-12HV03/R2(DB)
HSU-12HV03/R2(SDB)
HSU-18HV03/R2(DB)

SPLITTYPE ROOMAIRCONDITIONER
OPERATIONMANUAL
Pleaseread thisoperation manualbeforeusing the airconditioner

Beforedisposing an oldairconditionerthat
goesoutofuse,pleasemakesureit'sinop-
erativeand safe.Unplug the airconditioner
inordertoavoidthe risk ofchildentrapment.
It mustbe noticed thatairconditionersystem
containsrefrigerants,whichrequirespeciali-
zed wastedisposal.The valuablematerials
contained inan airconditionercan be recycled
.Contactyourlocalwastedisposalcenterfor
properdisposalofan oldairconditionerand
contactyourlocalauthorityoryourdealerif
you haveanyquestion.Pleaseensurethat
the pipeworkofyourairconditionerdoesnot
getdamagedpriortobeing picked up bythe
relevantwastedisposalcenter,and contribute
toenvironmentalawareness byinsisting on an
appropriate,anti-pollution method ofdisposal.
Cautions
Disposalofthe oldairconditioner
All the packaging materialsemployed inthe
package ofyournewairconditionermaybe
disposed withoutanydangertothe
environment.
The cardboardboxmaybe broken orcutinto
smallerpiecesand given toawastepaper
disposalservice.The wrapping bag made of
polyethylene and the polyethylene foampads
containnofluorochlorichydrocarbon.
All thesevaluablematerialsmaybe taken to
awastecollecting centerand used againafter
adequaterecycling.
Consultyourlocalauthoritiesforthe name
and address ofthe wastematerialscollecting
centersand wastepaperdisposalservices
nearesttoyourhouse.
Disposalofthe packaging ofyour
newairconditioner
Beforestarting the airconditioner,read the
information given inthe User'sGuide caref-
ully.The User'sGuide containsveryimpor-
tantobservationsrelating tothe assembly,
operation and maintenanceofthe air
conditioner.
The manufacturerdoesnotacceptrespon-
sibilityforanydamagesthatmayarisedue
tonon-observation ofthe following
instruction.
Damaged airconditionersarenottobe
putintooperation.Incaseofdoubt, consult
yoursupplier.
Useofthe airconditioneristobe carried
outinstrictcompliancewiththe relative
instructionssetforthinthe User'sGuide.
Installation shall be done byprofessional
people,don'tinstall unitbyyourself.
Forthe purposeofthe safety,the aircon-
ditionermustbe properlygrounded inacco-
rdancewithspecifications.
Always remembertounplug the air
conditionerbeforeopenning inletgrill.Never
unplug yourairconditionerbypulling on
the powercord.Always gripplug firmlyand
pull straightoutfromthe outlet.
All electricalrepairsmustbe carried out
byqualified electricians.Inadequaterepairs
mayresultinamajorsourceofdangerfor
the userofthe airconditioner.
SafetyInstructionsandWarnings
Donotdamage anypartsofthe air
conditionerthatcarryrefrigerantbypiercing
orperformating the airconditioner'stubes
withsharporpointed items,crushing or
twisting anytubes,orscraping the coatings
off the surfaces.If the refrigerantspurts
outand getsintoeyes,itmayresultin
seriouseyeinjuries.
2

Donotobstructorcoverthe ventilation
grilleofthe airconditoner.Donotputfingers
oranyotherthingsintothe inlet/outletand
swing louver.
Donotallowchildren toplaywiththe air
conditioner.Inno caseshouldchildren be
allowed tositon the outdoorunit.
The refrigerating circuitisleak-proof.
1.Applicableambienttemperaturerange:
Cooling IndoorMaximum:D.B/W.B32oC/23oC
24oC/18oC
-15oC
43oC/26oC
18oC
27oC
15oC
18oC/14oC
Maximum:D.B/W.B
Minimum:D.B
Maximum:D.B
Minimum:D.B
Minimum:D.B/W.B
Maximum:D.B/W.B
Minimum:D.B/W.B
Outdoor
Indoor
Outdoor
Heating
Specifications
The machine isadaptiveinfollowing
situation
10 .The powerplug and connecting cable
musthaveacquired the localattestation.
2.If the powersupplycordisdamaged,it
mustbe replaced bythe manufacturer
oritsserviceagentorasimilarqualified
person.
3.If the fuseofindooruniton PCboardis
broken,pleasechange itwiththe type of
T.3.15A/250V.
4.The wiring method shouldbe inline with
the localwiring standard.
5.Afterinstallation,the powerplug should
be easilyreached.
6.The wastebatteryshouldbe disposed
properly.
7.The applianceisnotintended foruse
byyoung children orinfirmpersons
withoutsupervision.
8.Young children shouldbe supervised
toensurethattheydo notplaywith
the applience.
9.Pleaseemploythe properpowerplug,
whichfitintothe powersupplycord.
Cautions
3

Cautions
STRICT
ENFORCEMENT
SafetyInstruction
Installation
WARNING
Pleaseread the following SafetyInstructionscarefullypriortouse.
The instructionsareclassified intotwolevels,WARNINGand CAUTIONaccording to
the seriousness ofpossiblerisksand damagesasfollows.Compliancetothe
instructionsarestrictlyrequired forsafetyuse.
Pleasecall Sales/ServiceShop forthe Installation.
Donotattempttoinstall the airconditionerbyyourselfbecauseimproperworks
maycauseelectricshock,fire,waterleakage.
lnstallation inainadequateplacemaycauseaccidents.Donotinstall inthe following place.
Connectthe earth
cable.
earthing
Donotinstall inthe
placewherethereis
anypossibilityof
inflammablegas
leakage around the
unit.
Donotgetthe unit
exposed tovapor
oroil steam.
Check proper
installation ofthe
drainage securely
PROHIBITIONPROHIBITION
4
CAUTION

Cautions
WARNING
When abnormalitysuchasburnt-small found,
immediatelystop the operation button and
contactsalesshop.
OFF
Useanexclusivepowersourcewitha
circuitbreaker
ENFORCEMENT
Connectpowersupplycord
totheoutletcompletelyUsethe propervoltage
Donotusepowersupplycord
inabundle.Takecarenottodamage
the powersupplycord.
Donotusepowersupplycord
extended orconnected inhalfway
STRICT
ENFORCEMENT
STRICT
STRICT
ENFORCEMENTPROHIBITION
PROHIBITIONPROHIBITION
PROHIBITION
Donotstartorstop the
operation bydisconnecting
the powersupplycordand soon.
Donotchanneltheairflowdirectly
atpeople,especiallyatinfantsor
the aged.
Donottrytorepairorreconstruct
byyourself.
Donotuseforthe purposeofstorage of
food,artwork,preciseequipment,
breeding,orcultivation.
CAUTION
Takefreshairoccasionallyespecially
when gasapplianceisrunning atthe
sametime.
PROHIBITIONSTRICT ENFORCEMENT
Donotoperatethe switchwith
wethand.
PROHIBITION
PROHIBITION
5
PROHIBITIONPROHIBITION
PROHIBITION
Donotinstall the unitnearafireplace
orotherheating apparatus.Checkgood conditionofthe
installation stand Donotpourwaterontothe unit
forcleaning
PROHIBITION
Donotplaceanimalsorplantsin
the directpathoftheairflowDonotplaceanyobjectson or
climbon the unit. Donotplaceflowervaseorwater containerson the top ofthe unit.
Donotinsertobjectsintotheair
inletoroutlet.
PROHIBITION
PROHIBITION
PROHIBITION

Partsand Functions
Indoorunit
Outdoorunit
6
CHANGE-FOR-FRESH-AIRBOX
OUTLET
CONNECTINGPIPINGAND ELECTRICALWIRING
INLET
1
2
3
4
CHANGE-FOR-FRESH-AIRTUBE
CHANGEFORFRESHAIRSIGNALWIRE
DRAINHOSE
5
6
7
UVlightdegerming
device(inside)
(Onlyforthe units
ofSDB)
Displayboard
Inlet
AirPurifying Filter
Verticalflap
(adjustup and downairflow.
Don'tadjustitmanually)
Horizontallouver
Airfilter(inside)
Inletgrille
Powerplug
(adjustleft and rightairflow)
(inside)
Outlet
Anion generator
(inside)
HSU-09HV03/R2(DB)
HSU-12HV03/R2(DB)
HSU-07HV03/R2(DB)
HSU-18HV03/R2(DB)
HSU-09HV03/R2(SDB)
HSU-12HV03/R2(SDB)

Partsand Functions
Used toselectCODEAorBwithapress,AorB
will be displayed onLCD.
PleaseselectAwithoutspecialexplanation.
1.CODE
When the remotecontrollerappearsabnormal,
useasharppointed articletopressthisbutton
toresetthe remotecontrollernormal.
2.RESET
Used toselectTIMERON,TIMEROFF,
TIMERON-OFF.
4.TIMERbutton
Used tosetcorrecttime.
5.CLOCKbutton
Used toselectsleep mode.
6.SLEEP button
7.MODEbutton
AUTOCOOLDRYFAN HEAT
Used tosetclockand timersetting.
8.HOUR button
Used tosethealthyoperation.
9.HEALTHbutton
Used forunitstartandstop.
10.ON/OFF button
11.TIMERONdisplay
12.FANSPEEDdisplay
LOWHI
MEDAUTO
13.LOCKdisplay
14.SWINGUP/DOWNdisplay
15.SLEEP display
16.HEALTHdisplay
Used toselectyourdesired temperature.
Operation mode AUTOHEAT FANCOOLDRY
Remotecontroller
18.Operation mode display
Displayboard
20.UVlightdegerming function display
21.Left/rightairflowdisplay
Remotecontroller:todisplaytheTEMP.setting.
22.TEMPdisplay
23.TIMEROFF display
25.TEMPbutton
Used toselectfanspeed:LOW,MED,HI,AUTO.
26.FANbutton
Used tosetthe healthairflowmode.
27.HEALTHAIRFLOWbutton
28.SWINGUP/DOWNbutton
Used toselectup ordownairsending direction.
29.SWINGLEFT/RIGHTbutton
Used toselectleft/rightairflow.
30.FRESHbutton
Usedtoconfirmtimerand clocksettings.
31.SETbutton
32.STERILIZEbutton
Used tolockbuttonsandLCD display.Ifpressed,the
otherbuttonswill be disabled andthe lockcondition
displayappears.Pressitonceagain,lockwill be
canceled and lock condition displaydisappears.
33.LOCK
7
UsetosetUVlightdegerming function.
34.Ambienttemp.display
Usetosetfreshairfunction.
24.TIMER/SLEEP display
17.FRESHAIRdisplay
19.Singalsending display
3.LIGHTbutton
Controlthelightening and extinguishing of
the indoorLEDdisplayboard.
NOTE:(1)The followingfunctionsandrelated displays arenotavailable:
(2)Cooling onlyunitdo nothavefunctionsanddisplays related withheating.
1
HSU-09HV03/R2(SDB)
HSU-12HV03/R2(SDB)
When receiving the remotecontrolsignal,displaythe set
temperatureand inthe resttimethe roomtemperatureis
displayed and thisroomtemperatureisonlyforreference.
FRESH
28
33
19
STERILIZE
18 2434 16 17

Partsand Functions
Used toselectCODEAorBwithapress,AorB
will be displayed onLCD.
PleaseselectAwithoutspecialexplanation.
1.CODE
When the remotecontrollerappearsabnormal,
useasharppointed articletopressthisbutton
toresetthe remotecontrollernormal.
2.RESET
Used toselectTIMERON,TIMEROFF,
TIMERON-OFF.
4.TIMERbutton
Used tosetcorrecttime.
5.CLOCKbutton
Used toselectsleep mode.
6.SLEEP button
7.MODEbutton
AUTOCOOLDRYFAN HEAT
Used tosetclockand timersetting.
8.HOUR button
Used tosethealthyoperation.
9.HEALTHbutton
Used forunitstartandstop.
10.ON/OFF button
11.TIMERONdisplay
12.FANSPEEDdisplay
LOWHIMEDAUTO
13.LOCKdisplay
14.SWINGUP/DOWNdisplay
15.SLEEP display
16.HEALTHdisplay
Used toselectyourdesired temperature.
Operation mode AUTOHEAT FANCOOLDRY
Remotecontroller
18.Operation mode display
Displayboard
20.POWER/SOFT display
21.Left/rightairflowdisplay
Remotecontroller:todisplaytheTEMP.setting.
22.TEMPdisplay
23.TIMEROFF display
24.TIMER/SLEEP display
25.TEMPbutton
Used toselectfanspeed:LOW,MED,HI,AUTO.
26.FANbutton
Used tosetthe healthairflowmode.
27.HEALTHAIRFLOWbutton
28.SWINGUP/DOWNbutton
Used toselectup ordownairsending direction.
29.SWINGLEFT/RIGHTbutton
Used toselectleft/rightairflow.
Usedtoconfirmtimerand clocksettings.
30.SETbutton
31.POWER/SOFT button
Used tolockbuttonsandLCD display.Ifpressed,the
otherbuttonswill be disabled andthe lockcondition
displayappears.Pressitonceagain,lockwill be
canceled and lock condition displaydisappears.
32.LOCK
8
Everytimethe button ispressed,displaychanges
asfollows:
33.Ambienttemp.display
1 17
POWERSOFT BLANK
17.FRESHAIRdisplay
19.Singalsending display
3.LIGHTbutton
Controlthelightening and extinguishing of
the indoorLEDdisplayboard.
NOTE:(1)Thefollowing functionsand relateddisplays arenotavailable:
(2)Cooling onlyunitdo nothavefunctionsand displays related withheating.
HSU-09HV03/R2(DB)
HSU-12HV03/R2(DB)
HSU-07HV03/R2(DB)
HSU-18HV03/R2(DB)
When receiving the remotecontrolsignal,displaythe set
temperatureand inthe resttimethe roomtemperatureis
displayed and thisroomtemperatureisonlyforreference.
28
32
19
30
31
18 2433 16 17

Removethe batteriesincaseunitwon'tbe inusage foralong period.If thereareanydisplay
aftertaking-out, justneed topress resetkey.
Partsand Functions
Clock Set
When unitisstarted forthe firsttimeand afterreplacing batteriesin
remotecontroller,clock shouldbe adjusted asfollows:
Remotecontroller'soperation
3.Aftertimesetting isconfirmed,press SET,"AM"or"PM"stop flashing,
whileclock startsworking.
2.Press ortosetcorrecttime.Eachpress will increaseordecrease
1min.If the button iskeptdepressed,timewill change quickly.
1.Press CLOCKbutton,"AM"or"PM"flashes.
When inuse,putthe signaltransmission head directlytothe receiverholeon the indoorunit.
The distancebetween the signaltransmission head and the receiverholeshouldbe within
7mwithoutanyobstacleaswell.
Don'tthroworknock the remotercontroller.
When electronic-started type fluorescentlamporchange-overtype fluorescentlampor
wireless telephone isinstalled inthe room,the receiverisapttobe disturbed inreceiving
the signals,sothe distancetothe indoorunitshouldbe shorter.
Loading ofthe battery
Load the batteriesasillustrated right
2R-03 (7#)batteries
Removethe batterycover:
Slightlypress""area and pushdownthe cover
asillustrated.
Load the battery:
Besurethatthe loading isinline withthe "+"/".
requestasillustrated on the bottomofthe case.
Puton the coveragain.
Confirmation indicator:
Afterpressing powerON/OFF,ifno display,reload the batteries.
Note:
Full displayoruncleardisplayduring operation indicatesthe batterieshavebeen used up.
Pleasechange batteries.
Used twonewsame-typed batterieswhen loading.
If the remotecontrollercan'trun normallyduring operation,pleaseremovethe batteriesand
reload severalminuteslater.
Hint:
9
FRESH
STERILIZE

Note:
(1)when the unitisoperating
healthorsterilizefunction," "
displayed on the displayboard
and ""isdisplayed on the
displayboardinthe fresh
function.
Operation
10
2.Healthanion function
Airconditionerstartshealthanion function operation.
Fortwicepress,disappears,the operation stops.
3.UVlightdegerming function
Press STERILIZEbutton," "and" "displayed onthe remote
controllerand the airconditioning startstheUVlightdegerming
function.
"":Fortiming operation ofUVlightdegerming functionand
automaticallycanceled after30 minutes'operation.
" ":Forthe long-timerunning ofUVlightdegerming function.
Nodisplay:ForUVlightdegerming functionnotstarting.
4.Change-for-fresh-airfunction
Press FRESHbutton ," "displayed on the remote
controllerand the change-for-fresh-airfunction operationbegins.
Fortwicepress ,thedisplay" "disappearsand the
change-for-fresh-airfunctionoperationiscanceled
BRIEFINTRODUCTIONTOHEALTHANIONFUCTION
UVlightemitted bythe UVlightdeviceofthe indoorunitcatalytically
activatesthe nano TiO2on the multi-lightstouching intermediary,
and the degerming effectishighlyefficientand lasting.
Note:when the function isrunning,don'topen the inletgrille.
AboutUVlightdegerming function
1.Afterthe change-for-fresh-airfunction isinitiated,the outside aircan
enterthe indoorsthrough the change-for-fresh-airtube thereby
keeping the indoorairfresh.
Aboutchange-for-fresh-airfunction
Healthfunction includeshealthanion function,UVlight
degerming function and change-for-fresh-airfunction.
The anion generatorinthe airconditionercan generatealotof
anion effectivelybalancethe quantityofposition and anion inthe
airand alsotokill bacteriaand speed up the dustsedimentin
the roomand finallyclean the airinthe room.
When the fan inthe indoorunitdoesnotwork,the healthlamp
lightsup,butthe anion generatordoesnotreleaseanion.
When indoorfan motorisrunning,ithashealthy
process function.(It'savailableunderanymode)
Press ON/OFF on the remotecontroller,unitstarts.
Press HEALTHbutton.Foreachpress,isdisplayed.
1.Unitstart
2.Setting the change-for-fresh-airfunction underthe shutdownstatus:
Undershutdownstatus,press the newwind keyand the remote
controllerdisplays the on statusofairflow,lowwind,and change-
for-fresh-airfunctions,and nowcan setthe timing open,timing
closeand timecontrolswitch.Press on-off button tocancelthe
change-for-fresh-airfunction.
HEALTHoperation
(2)The buttonsand thefunctionsof
FRESHand STERILIZEareonlyfor
theunitsofHSU-09HV03/R2(SBD)
andHSU-12HV03/R2(SBD).
(3)The buttonsand thefunctionsof
Power/Soft areonlyforthe unitsof
HSU-07$09$12$18HV03/R2(BD).
(4)When using the HEALTH/STERILIZE
function,the backlightisgreen;
When using the FRESHfunction,
the backlightisyellowishgreen;
If using the HEALTH/STERILIZEand
FRESHfunctionsatthe sametime,
the coloristhe lastone.
Remotecontroller
FRESH
STERILIZE

AutoOperation
Operation
Remotecontroller
11
AboutAutoOperation
Underthe mode ofautooperation,airconditionerwill
automaticallyselectCoolorHeatoperation according
toroomtemperature.
5.Unitstop
Press ON/OFF button,the unitstops.
1.Unitstart
Press ON/OFF on the remotecontroller,unitstarts.
2.Selectoperation mode
Press MODEbutton.Foreachpress,operation mode
changesasfollows:
Remotecontroller:
Then SelectAutooperation
AUTOCOOLDRYFAN HEAT
Press FANbutton.Foreachpress,fan speed changesas
follows:
Remotecontroller:
Press TEMP.button
Everytimethe button ispressed,temp.setting
increase1C,ifkeptdepressed,itwill increase
rapidly
Everytimethe button ispressed,temp.setting
increase1C,ifkeptdepressed,itwill decrease
rapidly
Selectadesired temperature.
4.Fan speed selection
3.Selecttemp.setting
Airconditionerisrunning underdisplayed fan speed.
When FANissettoAUTO,the airconditioner
automaticallyadjuststhe fan speed according toroom
temperature.
LOWMED HIAUTO
Onthe displaying board,colorfuldisplaying barwill be white.
NOTE:If the setting temperatureunderthe automode
ofthe remotecontrollerisadjustable,the setting
temperatureofthe wholeunitisadjustable;otherwise
the setting temperatureofthe wholeunitisnotadjustable
FRESH
STERILIZE

CoolOperation
Remotecontroller2.Selectoperation mode
Press FANbutton.Foreachpress,fan speed changesas
follows:
Press MODEbutton.Foreachpress,operation mode
changesasfollows:
Remotecontroller:
Remotecontroller:
Then SelectCOOLoperation
Press TEMP.button
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill increase
rapidly
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill decrease
rapidly
Selectadesired temperature.
4.Fan speed selection
3.Selecttemp.setting
5.Unitstop
Airconditionerisrunning underdisplayed fan speed.
When FANissettoAUTO,the airconditioner
automaticallyadjuststhe fan speed according toroom
temperature.
Press ON/OFF button,the unitstops.
AUTO
LOWMEDHIAUTO
COOLDRYFAN HEAT
1.Unitstart
Press ON/OFF on the remotecontroller,unitstarts.
Operation
12
Onthe displaying board,colorfuldisplaying barwill be blue.
FRESH
STERILIZE

2.Selectoperation mode
Press FANbutton.Foreachpress,fan speed changesas
follows:
Press MODEbutton.Foreachpress,operation mode
changesasfollows:
Remotecontroller:
Remotecontroller:
Then SelectDRYoperation
Press TEMP.button
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill increase
rapidly
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill decrease
rapidly
Selectadesired temperature.
4.Fan speed selection
3.Selecttemp.setting
5.Unitstop
Airconditionerisrunning underdisplayed fan speed.
InDRYmode,when roomtemperaturebecomes2OC
higherthan temp.setting,unitwill run intermittentlyat
LOWspeed regardless ofFANsetting.
Press ON/OFF button,the unitstops.
AUTO
LOWMEDHIAUTO
COOLDRYFAN HEAT
Operation
DryOperation
1.Unitstart
Press ON/OFF on the remotecontroller,unitstarts.
Remotecontroller
13
Onthe displaying board,colorfuldisplaying barwill be
lightblue
FRESH
STERILIZE

Fan Operation
2.Selectoperation mode
Press FANbutton.Foreachpress,fan speed changesas
follows:
Press MODEbutton.Foreachpress,operation mode
changesasfollows:
Remotecontroller:
Remotecontroller:
Then SelectFANoperation
3.Fan speed selection
4.Unitstop
AboutFANoperation
InFANoperation mode,the unitwill notoperatein
COOLorHEATmode butonlyinFANmode ,AUTOis
notavailableinFANmode.And temp.setting isdisabled.
InFANmode,SLEEP and POWER/SOFT operation is
notavailable.
Press ON/OFF button,the unitstops.
AUTO
LOWMED HI
COOLDRYFAN HEAT
Remotecontroller
Operation
1.Unitstart
Press ON/OFF on the remotecontroller,unitstarts.
14
Onthe displaying board,colorfuldisplaying barwill be pink.
FRESH
STERILIZE

Operation
2.Selectoperation mode
Press FANbutton.Foreachpress,fan speed changesas
follows:
Press MODEbutton.Foreachpress,operation mode
changesasfollows:
Remotecontroller:
Remotecontroller:
Then SelectHEAToperation
Press TEMP.button
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill increase
rapidly
Everytimethe button ispressed,temp.setting
increase1oC,ifkeptdepressed,itwill decrease
rapidly
Selectadesired temperature.
4.Fan speed selection
3.Selecttemp.setting
5.Unitstop
Press ON/OFF button,the unitstops.
AUTO
LOWMED HIAUTO
COOLDRYFAN HEAT
HeatOperation
Remotecontroller1.Unitstart
Press ON/OFF on the remotecontroller,unitstarts.
15
Airconditionerisrunning underdisplayed fan speed
INHEATmode,warmairwill blowoutafterashortperiod
ofthe timedue tocold-draft prevention function.
When FANissettoAUTO,the airconditioner
automaticallyadjuststhe fan speed according toroom
temperature.
Onthe displaying board,colorfuldisplaying barwill be red
FRESH
STERILIZE

2.Upand downairflowdirection
Verticalflap
Pos.1
Pos.1Pos.2Pos.3Pos.4Pos.6
Pos.5Pos.4Pos.3Pos.2Pos.1Pos.6
Pos.1Pos.2Pos.3Pos.4Pos.5Pos.6
Pos.2
Pos.3
Pos.4
Pos.5
Pos.6(Autoswing)
Foreachpress ofbutton,airflowdirection on remotecontrollerdisplays
asfollowsaccording todifferentoperation modes:
remotecontroller:
COOL/DRY/FAN
:
remotecontroller:
remotecontroller:
The verticalflap will swing according tothe abovepositions
HEAT:
AUTO:
1.Statusdisplayofairsending
Horizontallouvers
Pos.1
Pos.2
Pos.3
Pos.4
Pos.5
Pos.6
Pos.7
Pos.8
3.Left and rightairflowdirection
Foreachpress ofbutton,remotecontrollerdisplaysasfollows:
remotecontroller:
Pos.1Pos.2Pos.3Pos.4Pos.5Pos.6Pos.7Pos.8
The horizontallouverswill swing according tothe abovepositions.
Note:When restartafterremoteturning off, the remotecontrollerwill automatically
memorizethe previoussetswing position.
16
AirFlowDirection Adjustment
Operation
FRESH
STERILIZE

If the wind speed ishigh ormiddlebefore
setting forthesleep,setforlowingthe wind
speedaftersleeping.
If itislowwind,no change.
5.Setthe wind speed change whensleeping
Beforegoing tobed,you can simplypress the
SLEEP button and unitwill operateinSLEEP
mode and bring you asound sleep.
UseofSLEEP function
Afterthe unitstarts,setthe operation status,
then press SLEEP button beforewhichthe
clock mustbe adjusted and timebeing set.
Operation Mode
1.InCOOL,DRYmode
1hoursafterSLEEP mode starts,temp.will
become1OChigherthan temp.setting.After
another1hours,temp.risesby1OCfurther.
The unitwill run forfurther6hoursthen stops.
Temp.ishigherthan temp.setting sothatroom
temperaturewon'tbe too Iowforyoursleep.
RemoteController
SLEEP operation startsSLEEP operation stops
SLEEP
operation startsSLEEP
operation stops
Approx.6hrs
1hr
1hr
1hr
3hrs
3hrs
Rises1OC
Rises1OC
Rises1OC
Temp.setting
Temp.setting
Unitstop
Unitstop
InCOOL,DRYmode
InHEATmode
Decreases2OC
Decreases2OC
1hr
Sleep Operation
2.
3.
InHEATmode
1hoursafterSLEEP mode starts,temp
will become2OClowerthan temp.
setting.Afteranother1hours,temp
decreaseby2OCfurther.Aftermore
another3hours,temp.risesby1OC
further.The unitwill run forfurther3
hoursthen stops.Temp.islowerthan
temp.setting sothatroomtemperature
won'tbe too high foryoursleep.
InAUTOmode
The unitoperatesincorresponding sleep
mode adapted tothe automaticallyselected
operation mode.
4.InFANmode
It hasno SLEEP function.
Operation
17
6.Notetothe compensation forthe powerout:
press the sleep button ten timesinfiveseconds
and enterthisfunction afterhearing foursounds.
And press the sleep button ten timeswithinfive
secondsand leavethisfunction afterhearing
twosounds.
Withthe power-ourcompensation,when setting
the TIMERON,TIMEROFF andTIMERON/OFF,
itísmemorized asshutdownstatuswhen resuming
afterpowerout.
NOTE:
FRESH
STERILIZE

RemoteController
TimerOn/Off Operation
Operation
Hints:
Afterreplacing batteriesorapowerfailurehappens,timesetting shouldbe reset.
Remotecontrollerpossessesmemoryfunction,when useTIMERmode nexttime,
justpress SETbutton aftermode selecting iftimesetting isthe sameaspreviousone.
18
Setclock correctlybeforestarting TIMERoperation.
1.Afterunitstarts,selectyourdesired operation mode
Operation mode will be displayed on LCD.
2.Timermode selection
Press TIMERbutton tochange TIMERmode.Every
timethe button ispressed,displaychangesasfollows:
Remotecontroller:
Then selectyourdesired TIMERmode (TIMERONor
TIMEROFF).""or""will flash.
3.Timesetting
Press HOUR button.
Everytimethe button ispressed,timesetting
increases1min,ifkeptdepressed,itwill increase
rapidly.
Everytimethe button ispressed,timesetting
decreases1min,ifkeptdepressed,itwill decrease
rapidly.
It can be adjusted within24 hours.
4.Confirming yoursetting
Aftersetting correcttime,press SETbutton toconfirm
""or""on the remotecontrollerstopsflashing.
Timedisplayed:Unitstartsorstopsatxhourxmin.
(TIMERONorTIMEROFF).
5.CancelTIMERmode
Justpress TIMERbutton severaltimesuntil TIMER
mode disappears.
FRESH
STERILIZE
BLANK
TIMER ON TIMER OFF TIMER ON-OFF

RemoteController
TimerOn-Off Operation
Operation
Justpress TIMERbutton severaltimesuntil TIMER
de disappears.
According tothe Timesetting sequenceofTIMERON
orTIMEROFF,eitherStart-Stop orStop-Startcan be
achieved.
Setclock correctlybeforestarting TIMERoperation.
1.Afterunitstarts,selectyourdesired operation mode
Operation mode will be displayed on LCD.
2.Timermode selection
Press TIMERbutton tochange TIMERmode.Everytime
the button ispressed,displaychangesasfollows:
Remotecontroller:
Then selectyourdesired TIMERmode (TIMERON-OFF).
""will flash.
3.Timesetting
Press HOUR button.
Everytimethe button ispressed,timesetting increases
1min,ifkeptdepressed,itwill increaserapidly.
Everytimethe button ispressed,timesetting decreases
1min,ifkeptdepressed,itwill decreaserapidly.
It can be adjusted within24 hours.
4.Timerconfirming forTIMERON
Aftersetting correcttime,press TIMERbutton toconfirm
""on the remotecontrollerstopsflashing.
""startsflashing.
Timedisplayed:Unitstartsorstopsatxhourxmin.
5.Timesetting forTIMEROFF
6.Timeconfirming forTIMEROFF
TocancelTIMERmode
Justpress HOUR button ,followthe sameprocedurein
"Timesetting forTIMERON"
Aftertimesetting,press SETbutton toconfirm.
""on the remotecontrollerstopsblinking.
Timedisplayed:Unitstopsatxhourxmin.
19
FRESH
STERILIZE
BLANK
TIMER ON TIMER OFF TIMER ON-OFF