Haier SAP-KRV9AV User manual

INSTRUCTION MANUAL
FIRST MADE FOR SAP-KRV9, 12 18 and 22AV
MATERIAL OR MODEL *PAPER-JO
DIMENSION OR MAKER WOODFREE 55gm
COLOR BLACK Print
NOTE A4 SIZE
APPROVED BY
N.Yamazaki
2010/DEC/31
APPROVALS DATE REVISIONS R.NO
DRAWN REMARKS: PART CODE
SAPL ONLY
852-6-4181-XXX-00
PART NAME
INSTRUCTION MANUAL
CHECKED BY
Andy Pui K. H.
2010/DEC/31
DESIGNED BY
2010/DEC/31

© SANYO 2010
SAP-KRV9AV
SAP-KRV12AV
SAP-KRV18AV
SAP-KRV22AV
COOL AND DRY MODEL
Pub. OI-85264181 xxx 00
This air conditioner uses
the new refrigerant R410A.
INSTRUCTION MANUAL
Inverter-Controlled Split System Air Conditioner
Save These Instructions!

2
FEATURES
This air conditioner is an inverter type unit that automatically adjusts capability as appropriate. Details on these functions are provided
below; refer to these descriptions when using the air conditioner.
24-hour Clock with ON/OFF Program Timer
The remote control unit allows you to set a wide variety
of timer-based operations including automatic ON/OFF
with timer setting, same-time ON/OFF every day, ON
timer, OFF timer and Combination timer.
Mild Dry
By coupling the compressor and fan operation,
intermittent drying can be precisely controlled according
to room temperature so that air is efficiently
dehumidified.
Auto Clean
Fan operates when the unit is stopped to prevent the
generation of mold and odors within the indoor unit.
Humanized Sleep Function
Temperature gently rises or falls automatically to
maintain comfortable room temperature, saving energy.
Rapid Cooling (Heating)
The high-efficiency system cools quickly while
maintaining high EER/COP.
Super Quiet
Specially designed air vent efficiently reduces noise.
Turbo
Powerfully cools the room.
Automatic Fan Operation
Convenient microprocessor control automatically adjusts
fan speed to High, Medium or Low, according to room
temperature, to maintain a comfortable airflow
throughout the room.
Air Sweep Control
The air sweep function automatically moves the air outlet
flap up and down, directing air in a sweeping motion
around the room and ensuring comfort in every corner.
Automatic Restart Function for Power Failure
Even when power failure occurs, preset programmed
operation is reactivated once power resumes.
Self Diagnosis
Error code is displayed for fast and easy maintenance,
should a problem occur.
Low Voltage Startup (Min.198V)
The unit starts safely even when the voltage is below the
rated voltage.
Child Lock
Remote controller keys are lockable to prevent
misoperation.
Blue Fin
Anti-corrosion blue fin is more effective than a common
coil.
CONTENTS
Page
FEATURES ......................................................................................................................................... 2
PRODUCT INFORMATION ................................................................................................................ 3
ALERT SYMBOLS.............................................................................................................................. 3
INSTALLATION LOCATION ................................................................................................................ 3
ELECTRICAL REQUIREMENTS........................................................................................................3
SAFETY INSTRUCTIONS.................................................................................................................. 3
1. USAGE POINTS ........................................................................................................................... 4
2. NAMES AND FUNCTIONS OF PARTS ........................................................................................ 6
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT............................................................ 7
4. CLEANING AND CARE .............................................................................................................. 16
5. ADJUSTING THE AIRFLOW DIRECTION CORRECTLY ........................................................... 18
6. TROUBLESHOOTING ................................................................................................................ 18

3
PRODUCT INFORMATION
If you have problems or questions concerning your Air
Conditioner, you will need the following information.
Model and serial numbers are on the nameplate on the
bottom of the cabinet.
Model No. __________________________________
Serial No. ___________________________________
Date of purchase_____________________________
Dealer’s address _____________________________
Phone number ________________
ALERT SYMBOLS
The following symbols used in this manual, alert
you to potentially dangerous conditions to users,
service personnel or the appliance:
INSTALLATION LOCATION
•We recommend that this air conditioner be
installed properly by qualied installation
technicians in accordance with the Installation
Instructions provided with the unit.
•Before installation, check that the voltage of the
electric supply in your ho me or oce is the same as
the voltage shown on the nameplate.
Avoid:
To protect the air conditioner from heavy corrosion, avoid installing
the outdoor unit where salty sea water can splash directly onto it
or in sulphurous air near a spa.
ELECTRICAL
REQUIREMENTS
1. All wiring must conform to the local electrical codes.
Consult your d ealer or a qualied electrician for
details.
2. Each unit must be properly grounded with a ground
(or earth) wire or th rough the supply wiring.
3. Wiring must be done by a qualied electrician.
SAFETY INSTRUCTIONS
•Read this Instruction Manual carefully before
using this air conditioner. If you still have any
diculties or problems, consult your dealer for
help.
•This air conditioner is designed to give you
comfortable room conditions. Use this only for its
intended purpose as described in this Instruction
Manual.
This symbol refers to a hazard or
unsafe practice which can result in
severe personal injury or death.
This symbol refers to a hazard or
unsafe practice which can result in
personal injury or product orproperty
damage.
•Do not install this air conditioner
where there are fumes or ammable
gases, orin an extremely humid
space such as a greenhouse.
•Do not install the air conditioner
where excessively high heat-
generating objects are placed.
CAUTION
•Never use or store gasoline or other
ammable vapor or liquid near the
air conditioner — it is very
dangerous.
•This air conditioner has no ventilator
for intaking fresh air from outdoors.
You must open doors or windows
frequently when you use gas or oil
heating appliances in the same
room, which consume a lot of
oxygen from the air. Otherwise there
is a risk of suocation in an extreme
case.
•Do not turn the air conditioner on
and o from the power mains switch.
Use the ON/OFF operation button.
•Do not stick anything into the air
outlet of the outdoor unit. This is
dangerous because the fan is
rotating at high speed.
•Do not let children play with the air
conditioner.
•Do not cool or heat the room too
much if babies or invalids are
present.
CAUTION

4
1. USAGE POINTS
1.1 Working Principle
and Special
Functions for
Cooling
Principle:
An air conditioner (cooling) absorbs room heat and transmits and discharges
it outdoors, thereby decreasing the ambient indoor room temperature. Its
cooling capacity will decrease relative to an increase in the outdoor ambient
temperature.
Anti-freezing Function:
If the unit is running in COOL mode and at a low temperature, frost will form
on the heat exchanger; when the indoor heat exchanger temperature
decreases to below 0°C, the micro-computer of the indoor unit will stop
running the compressor to protect the unit.
1.2 Working Principle
and Special
Functions for
Heating
Principle:
1. An air conditioner (heating) absorbs heat from outdoors and transmits it
indoors, thereby increasing the indoor room temperature. Its heating
capacity will decrease relative to a decrease in the outdoor ambient
temperature.
2. If the outdoor temperature is lower than the room temperature, please
operate the system with other heating/ventilating equipment.
Defrosting:
1. When the outdoor temperature is low and there is high humidity, after the
unit runs for a while, frost will form on the outdoor unit and aect the
heating function. At this time, the auto-defrosting function will turn on, and
the heating operation will stop for 8-10 minutes.
2. While the auto-defrosting function is operating, both the fan motors of the
indoor and outdoor units will stop operating.
3. While the defrosting function is operating, the indoor indicator ashes and
the outdoor unit may emit vapor. This is due to the defrosting and is not a
malfunction.
4. After defrosting has nished, the heating process will resume
automatically.
Cold Draft Prevention:
In “HEAT” mode, the indoor blower will not act under the following 3 statuses,
until the heat exchanger reaches a certain temperature. This is to prevent
cool air from blowing. (Within 2 minutes)
1. When heating starts.
2. After auto-defrosting has nished.
3. Heating under low ambient temperature
Gentle Breeze:
Under the following conditions, the indoor unit may produce a gentle breeze,
and the guide louver may rotate to a predetermined position:
1. In “Heat” mode with the unit turned on, until the compressor starts
operationg
2. In “Heat” mode with the temperature at the set value and the compressor
has stopped running at about 1 minute.
** For Heatpump models Only **

5
1. USAGE POINTS
1.3 Working Temperature Range
Temperature Indoor Air Temperature Outdoor Air Temperature
COOLING
Max.32°C DB / 23°C WB 43°C DB / 26°C WB
Min. 19°C DB / 14°C WB 19°C DB

6
2. NAMES AND FUNCTIONS OF PARTS
S/n Part Name
(1) Power cable
(2) Remote control unit
(3) Front panel
(4)Filter
(5) Guide louver
(6) Wall pipe
(7)Bind tape
(8) Drainage pipe
Outdoor Unit
Indoor Unit
Air intake
Air outlet
Wireless remote
control unit
Air intake
Air outlet
Dry
Run
Receive
window
SET TEMP
Cool
ON/OFF
ON / OFF
COOL DRY
RUN

7
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.1 Remote Control Unit (Display)
(1) Operation mode
AUTO
COOL........................................
DRY...........................................
FAN ...........................................
HEAT
(2) Fan speed
Automatic operation ..................
HIGH ........................................
MID............................................
LOW ..........................................
(3) Set temperature
16–30°C
When set to 23 °C .....................
(4) Timer
24-hour ON Timer ....................
24hour OFF Timer ....................
(5) Sleep .........................................
(6) Conrmation of transmission.....
(7) Clock indication .........................
(8) Sweep indication .......................
(9) Light ..........................................
(10) Blow ........................................
(11) Turbo .......................................
(12) Temperature ............................
(13) Lock.........................................
Displayed when setting
timer
Displayed when
transmitting data
Displayed when setting
temperature
Displays clock
Symbols
AUTO
F
C
ON
OFF
OPER
(for Heatpump models only)..........
........................................

8
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.2 Remote Control Unit Functions
Transmitter When you press the buttons on the remote control unit, the mark
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
Display Information on the operating conditions is displayed while the remote control
unit is turned on. If the unit is turned o, only the current time and the
operation mode temperature that has been set are displayed.
ON/OFF operation button This button is for turning the air conditioner ON and OFF.
MODE selector button To select “AUTO” “COOL” “DRY” “FAN” or “HEAT” mode.
(AUTO) : In this setting, the air conditioner calculates the dierence between the
thermostat setting and the room temperature and automatically
switches to appropriate running mode.
(COOL): The air conditioner makes the room cooler.
(DRY) : The air conditioner reduces the humidity in the room.
(FAN) : The air conditioner runs the indoor fan only.
(HEAT) : The air conditioner makes the room warmer. (** only for Heatpump models **)
(+) / (-) setting buttons: Press the (+) button to increase the set temperature; continue pressing
for two seconds to quickly increase the set temperature.
: Press the (-) button to reduce the set temperature; continue pressing
for two seconds to quickly reduce the set temperature.
LOCK / UNLOCK button: Simultaneously press the b button to lock or unlock the wireless
remote control unit.
TIMER ON buttonON : The air conditioner starts at the set time.
TIMER OFF button OFF : The air conditioner stops at the set time.
Signal Transmitter
MODE selector button
SWING button
TIMER ON button
TIMER OFF button
LIGHT button
Display
TEMP button
ON/OFF operation button
TEMP. setting button
FAN SPEED Selector button
CLOCK button
BLOW button
TURBO button
SLEEP button
OPER
+
+
OI-183-8-EG

9
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.2 Remote Control Unit Functions (Continued)
FAN SPEED selector button AUTO : The air conditioner automatically decides the fan speeds.
: Low fan speed.
: Medium fan speed.
: High fan speed.
TEMP button Press to see the set temperature or indoor temperature that are displayed on
the indicator lamp.
: Display the preset temperature.
: Display the indoor ambient temperature (5 seconds)
The ambient temperature will be displayed for 5 seconds,
following which the preset temperature will be displayed.
: Current displaying status will not be changed.
No Icon : Default display of preset temperature.
BLOW buttonPress to start or stop indoor fan drying indoor components. This function is
applicable to “COOL” & “DRY” mode only. In “AUTO,” and “FAN mode,
“BLOW” function is not available and “BLOW” is not displayed.
LIGHT button Press this button to turn ON/OFF indicator light display.
TURBO button Press to quickly cool or heat the room with powerful cool or hot air.
SLEEP buttonFor details, see “SLEEP MODE” (page 12). When you press this button in
the “DRY,” “COOL” or “HEAT” mode, the mark appears in the display and
the remote control unit will automatically adjust the set temperature to save
energy.
CLOCK ButtonUse this button to set the clock.
How it Works
Press the CLOCK button once if the indicator is not ashing. The
indication alone ashes. Within 5 seconds, press the +/– button. The time
can be set in 1-minute increments. Holding down the button advances the
time rapidly in 10-minut e increments. Press the CLOCK button again. The
is displayed, completing the setting of the current time.
SWING ButtonSets the air swing direction to change circularly as below:
When the guide louver begins swinging up and down, if swing is turned
o, the air guide louver will stop at the current position. (refer to page
14 for more details)
AUTO
NOTE
OFF
NOTE