Haier HDHP80AW1 User manual

HDHP80AW1
HDHP80AWB1

Technical data
0

Before switching on your applinace for the first time, read and save this guide.
Do not operate this machine if it has been damaged during transport.
Contact your dealer or Haier service technician.
Ensure all transport bolts are removed before running the applinace.
Remove all packaging and keep out of reach of children.
This appliance is heavy, we recommend 2 people to move and install the
appliance.
This appliance is not intended for use by persons (including children) with re
-duced physical, sensory or mental capabilities, or lack of experience and kn
-owledge, unless they are supervised or given instructions on how to use the
dryer by someone responsible for their safety.
Supervise children to ensure they do not play with the appliance or climb
inside the drum.
Do not touch or operate the machine with wet hands or with bare-feet.
Do not place dripping wet clothing on top of the appliance as it may create
an electrical hazard.
Do not use the appliance if industrial chemicals have been used for cleaning.
Ensure all lint filters are cleaned before every load.
If the lint filter is damaged, contact your Haier service technician toarrange
getting a new filter. Do not operate your appliance with a damaged lint filter
or without the filter in place, as this will cause damage to your appliance.
The ambient temperature should be between 5 °C and 35 °C.
Keep the area around the tumble dryer free of dust and lint.
Do make sure that there is only laundry inside the appliance and no pets or
children before you use it.
Only touch the mains plug with dry hands and do not touch or use the
appliance if you are barefoot or have wet or damp hands or feet.
Only dry textiles washed in water.
Do not overload the appliance beyond its rated capacity.
Remove all items such as lighters and matches from pockets. Use fabric
softeners or similar products as specified by the manufacturer's packaging.
Hold the plug, not the cable, when unplugging the appliance.
Do not touch the rear wall and the drum during operation; they are hot.
Do not place heavy objects or sources of heat or damp on top of the appliance.
Do not cover any ventilation openings in the base by a carpet or similar object.
Do not operate this product without the lint filter in place or allow lint to
accumulate in or around the appliance.

Items that have been soiled with substances such as cooking oil, acetone,
alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax
removers should be washed in hot water with ab extra amount of
detergent before being dried in the appliance.
Items such as foam rubber (latex foam), shower caps, waterproof textiles,
rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the appliance.
Oil-affected items can ignite spontaneously, especially when exposed to
heat sources such as a tumble appliance. The items become warm causing
an oxidation reaction in the oil. This oxidation creates heat. If the heat cannot
escape the items can become hot enough to catch fire. Piling, stacking or
storing oil-affected items can prevent heat from escaping creating a fire
hazard.
If it is unavoidable that fabrics that contain vegetable oil, cooking oil or have
been contaminated by hair care products be placed in the appliance, they
should first be washed in hot water with extra detergent – this will reduce, but
not eliminate the fire hazard. The cool down cycle of the appliance should be
used to reduce the temperature of these items. They should not be removed
from the tumble appliance and piled or stacked while hot.
Do not drink the condensed water.
Notice that the last stage of the drying cycle is a cool down and the dryer will
run without heat for a few minutes to ensure that the garments are at a safe
temperature to be taken out of the drum. If the cycle is paused during the
drying stage, a cool down might take place. Garments may still feel hot to the
touch-. handle with care.
WARNING: Never stop a tumble dryer before the end of the drying cycle
unless all items are quickly removed and spread out so that the heat is
dissipated.
Switch off the appliance after each drying programme to save electricity and
for safety.
Do not dry following items in the appliance:
Make sure children are supervised if they carry out cleaning and maintenance.
Disconnect the appliance from the electrical supply before undertaking any
routine maintenance.

WARNING: The appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by a utility.
Install the appliance on a solid and level surface ensuring it has 20mm
clearance on each side. The appliance must not be installed on any textured
floor coverings (eg carpet, rugs).
Clean the lint filter and the condenser filter after each pro- gramme (refer to
CARE AND CLEANING).
Do not use water spray or steam to clean the appliance.
Do not use industrial chemicals to clean the appliance.
Replace a damaged supply cord only by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Do not try to repair the appliance by yourself. In case of repair please contact
our customer service.
The appliance must not be installed behind a lockable door, sliding door, or a
door with a hinge on the opposite side to the of the appliance, in such a way
that a full opening of the appliance door could be restricted.
Install the appliance in a well-ventilated, dust-free environment.
Do not install the appliance outdoors, in a damp location, ir in an area which
is prone to water leaks. In the event of a water leak, unplug the appliance and
allow it to dry naturally.
Do not install the appliance in a location where the ambient temperature
drops below 5°C. If install the product in a low temperature room, and using
the product continuously, there might be some water condensation and
drops on floor.
Do not place the appliance directly on a carpet, or close to a wall or furniture.
Do not expose the appliance to any frost, heat or direct sunlight or in the near
of heat sources(e.g. stoves, heaters).
Make sure that the electrical information on the rating plate agrees with the
power supply. If it does not, contact an electrician.
Do not use multi-plug adapters and extension cables. Make sure not to
damage the electric cable and the plug.
Use a separate earthed socket for the power supply which is easy accessible
after installation. The appliance must be earthed.
Servicing & Disposal
A damaged electrical cable must be replaced by a Haier service technician or

HDHP80AW1
HDHP80AWB1
similarly qualified person. Do not use the appliance until it has been repaired.
The only user-removable parts of the appliance are the filters and drying rack.
No other parts are designed to be removed by the user.
When disposing of the dryer, it is recommended that the door is removed to
avoidchildren getting trapped inside, and that the electrical cable is cut off
close to thedryer.

Express 60’
Mixed
Baby Care
Bulky
Durable
Allergy
Bedding
Cotton
Synthetics
Delicate
Shirts
Wool
Towels
Time Dry
Air Dry
Anti-crease Favorite
Delay
Time Dry level
14
10 11 12 13 14 15
2
3
5
6
7
8
9
DelayEmpty tank indicator
Clean filter indicator
Delay indicator
Favorite
Empty tank indicator
Water tank must be emptied (Fig. 4-1).
Important: Empty the water tank after each drying cycle.
See Empty the water tank section of the manual.
4.2 Clean filter indicator
Filters must be cleaned regularly. See Lint Filter Clean-
ing or Condenser Filter Cleaning section of the manual.
4
Dry level
OFF and keylock combi buttons
Favorite indicator
OFF

4.6 Delay indicator
4.6 Favorite mode
When choose the delay program(Fig.4-6),
It will light up
5
4.8
4.9
Turn the knob to any position (except OFF) to start the
machine. Turn knob the OFF position to shut down the
machine(Fig. 4-8).
OFF
Press Favorite for three seconds, It will light up(Fig.4
-7). The current program and setting function will be
set to favorite mode, and the next time the program
is selected, the favorite setting will be automatically
called. Press and hold the Delay and Favorite keys for 3
seconds,clear all Favorite program settings,restore the
factory default settings, and the indication of all
Favorite programs goes out.

212
13
14
4.13 Delay
4.14 Favorite
the cycle. Press the button(Fig.4-13) to set the desired
Delay function allows users to delay the start time of
starting time (From 0 up to 12 hours). When activating,
the indicator icon (Fig.4-6) will light up.
Favorite
Before startup, it can be set. The setting method is
to adjust the settings and press and hold the
Favorite button for 3 seconds. After startup, it can‘t
be set, including pause, drying, delay, end, and
anti-crease phase.
After successfully setting favorite, there will be a so
-und prompt and the icon will light up. (Fig. 4-7)
The program after favorite is still valid after power
off. The default program can also be favorite. If the
program settings are not changed, perform the
favorite operation again and still execute a valid fav
-orite.Favorite has an overlay function, which allows
you to continue setting new favorite settings on top
of existing favorite programs.Press and hold the
Delay and Favorite keys for 3 seconds, there is a
prompt tone, and the digital display screen displays
’dEF‘for 3 seconds. After 3 seconds, switch back to
the program interface indicated by the knob, clear all
favorite program settings, restore the factory default
settings, and the indication of all favorite
programs go out.

15
5

5
Express 60’
Mixed
Shirts
Wool
Air Dry
3
Baby Care
4
5
For wool clothes 3
1
2
Suitable for conventional drying of
cotton linen and polyester cotton
blended shirts
A cycle for mixed loads including
cottons, synthetics and mixed fibres
For baby clothes and underwear
that needs high temperature to
reduce allergens and bacteria
Freshness and deodorization
of clothing
A fixed 60 minutes dry
DEFAULT DRY LEVEL : Dry Damp
; ;
Cotton,Dry level H-2

6
Sort items into loads of similar items,and loads that will likely take similar times to dry.This prevents the
possibility of some items becoming over-dried whilst others are still damp.
Separate coloured items from white/light items where possible, especially when new. Colour run may be
an issue, especially if you intend to delay the start of the drying cycle.
Care labels on garments provide valuable information about the fabric type and how the garment should
be dried. Always follow the advice on garment labels.
Check pockets for items that could damage your clothes or get caught in the dryer. Close zippers, hooks
and eyes, and other fastenings (ie fasten the openings of duvet/ doona covers),and remove loose bra
wires. These may damage both your dryer and your clothes.
Items of clothing with screen-printing should be turned inside out to prevent damage to the print.
Check the lint filter is clean and the water tank is empty (if the dryer is not set up to drain automatically).

6
Garments need to be loaded correctly to minimise creasing and wrinkling, and to ensure the load is
dried evenly.
Allow enough room in the dryer for clothes to tumble freely. Load the dryer in terms of the space the
garments take up when dry, rather than when they are wet.
Shake clothes out and load individually to help items dry evenly and reduce tangling.
Dry permanent press garments (business shirts) together on the Damp dryness level with Anti-crease
option on. This will help reduce wrinkling and the need for ironing.
Hang garments as soon as the drying cycle is complete to reduce the need for ironing.
Delicate or easily damaged items (eg nylon stockings,fine fabrics, delicate embroidered fabrics) should be
dried separately, using the DELICATE cycle, or if you do not want them tumbled use the RACK DRY cycle.
Sleeping bags and other down items should be dried on BULKY cycle.

7
77
77
7
7
Turn the knob to any position (except OFF) to
start the machine.
7
7
7
7
7
7
7
7
7
Delay
（
）

7
7
Press to restart the dryer with the
new cycle.
When the cycle finishes, your dryer will beep and then turn off automatically.If the Anti-crease option has
been selected, the dryer will rotate the drum periodically to help minimise wrinkling and creasing of your
load.
If you wish to stop the dryer before the cycle has finished you MUST remove the clothes IMMEDIATELY
and spread them out to cool. DO NOT leave the clothes in the dryer or bunched up in a clothes basket.
Take extreme care as the drum and the load items may be extremely hot.
7
7
7

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

There are sensors in your dryer that detect whether the laundry is dry or not. These sensors need
to be cleaned periodically (we recommend approximately four times a year).
1.Open the door of your dryer. Allow the dryer to cool if dry
-ing has been carried out.
2. Locate the metal sensors just behind the lint filter.
3.Wipe the sensors with a soft cloth,dampened with vinegar
and dry with a clean dry soft cloth.
8
8
8
8
8
8
8
8
8

8
8
8