Hainbuch TESTit User manual

Installation manual
Clamping force tester TESTit

Clamping force tester TESTit
Table of contents
1 General....................................................................................................................4
1.1 Information about this manual........................................................................4
1.2 Explanation of symbols..................................................................................4
1.3 imitations of liability.......................................................................................5
1.4 Max. RPM.......................................................................................................6
1.5 Copyright........................................................................................................6
1.6 Scope of delivery............................................................................................6
1.7 Warranty terms...............................................................................................7
1.8 CFK.................................................................................................................7
2 Safety......................................................................................................................8
2.1 Responsibility of the customer.......................................................................8
2.2 Personnel requirements.................................................................................8
2.3 Intended use.................................................................................................10
2.4 Personal protective equipment.....................................................................11
2.5 Environmental protection..............................................................................12
3 Technical data.......................................................................................................13
3.1 General Information......................................................................................13
3.2 Operating conditions.....................................................................................14
3.3 Type designation..........................................................................................14
4 Structure and function...........................................................................................15
4.1 Overview.......................................................................................................15
4.1.1 O.D. clamping.....................................................................................15
4.1.2 I.D. clamping......................................................................................15
4.2 Brief description............................................................................................16
4.3 Functional description..................................................................................17
4.4 Accessories..................................................................................................18
4.4.1 Tablet.................................................................................................18
4.4.2 Measuring head.................................................................................18
4.4.3 USB charging cable...........................................................................18
4.4.4 USB charging device..........................................................................18
5 Transporting, packaging and storing....................................................................19
5.1 Transport inspection.....................................................................................19
5.2 Storing..........................................................................................................19
6 Connection............................................................................................................20
6.1 Starting the software.....................................................................................20
6.2 Measuring head............................................................................................21
6.2.1 Display................................................................................................21
6.2.2 Connectors.........................................................................................21
6.2.3 Conversion of the measuring head....................................................22
7 Measuring.............................................................................................................24
7.1 Precondition..................................................................................................24
7.2 Possible application......................................................................................25
2Order Hotline [phone]

Clamping force tester TESTit
7.2.1 I. D. clamping.....................................................................................25
7.2.2 O. D. clamping....................................................................................25
7.3 Settings.........................................................................................................26
7.3.1 oad existing measuring head...........................................................26
7.3.2 Search and safe a new measuring head...........................................27
7.3.3 Number of clamping positions [only with size 32 and 65]..................28
7.3.4 Edit the user.......................................................................................30
7.3.5 Edit the machine................................................................................31
7.3.6 Edit language.....................................................................................32
7.3.7 Printer settings...................................................................................33
7.4 Measuring process.......................................................................................34
7.5 Saving measurements..................................................................................36
8 Maintenance / Service..........................................................................................38
8.1 Subsequent storage of the clamping device................................................38
8.2 Cleaning........................................................................................................38
8.3 Annual factory calibration.............................................................................39
8.4 Disposal........................................................................................................41
9 Trouble shooting...................................................................................................42
9.1 Safety............................................................................................................42
9.2 Trouble shooting table..................................................................................43
10 Appendix...............................................................................................................44
10.1 Service Hotline.............................................................................................44
10.2 Representatives............................................................................................44
10.2.1Europe................................................................................................44
10.2.2America..............................................................................................47
10.2.3Asia....................................................................................................47
10.2.4Australia.............................................................................................48
10.2.5Africa..................................................................................................48
Index..............................................................................................................................49
»Translation of original installation manual«
Order Hotline [phone]

Clamping force tester TESTit – General
1 General
1.1 Information about this manual
This manual enables safe and efficient handling of the
product.
The manual is a component of the product and must be
kept in the immediate vicinity of the product where it is
accessible for personnel at all times. Personnel must
have carefully read and understood this manual prior to
starting all tasks. The basic prerequisite for safe work
is compliance with all the safety instructions and han-
dling instructions in this manual.
Illustrations in this manual are provided for a basic un-
derstanding and may deviate from the actual model of
the product.
It is assumed that the reader is familiar with standard
procedures, such as cleaning the mounting surfaces.
1.2 Explanation of s mbols
Safet instructions Safety instructions are indicated by symbols in this
operating manual. The safety instructions are intro-
duced by signal words that express the scope of the
hazard.
The safety instructions must be strictly adhered to.
You must act prudently to prevent accidents, personal
injury, and material damage.
DANGER
… indicates an imminent dangerous situation
than can result in death or serious injury if it is
not avoided.
WARNING
… indicates a possible dangerous situation
that can result in death or serious injury if it is
not avoided.
CAUTION
… indicates a possible dangerous situation
that can result in minor or light injury if it es not
avoided.
4Order Hotline [phone]

Clamping force tester TESTit – General
NOTE
… indicates a possible dangerous situation
that can result in material damage if it is not
avoided.
Tips and recommen-
dations
… indicates useful tips and recommendations,
as well as information for efficient and trou-
ble-free operation.
1.3 Limitations of liabilit
All information and instructions in this operating manual
have been provided under due consideration of appli-
cable standards and regulations, the current state of
technology, as well as our many years of experience.
The manufacturer assumes no liability for damage due
to:
Failure to follow the instructions in the manual
Non-intended use
Deployment of untrained personnel
Unauthorized conversions
Technical changes
Use of non-approved spare parts
The actual scope of delivery can vary from the expla-
nations and graphic representations provided in this
manual in the case of special versions, if supplemental
order options are desired, or on the basis of the latest
technical changes.
The agreed obligations in the delivery contract, the
general terms and conditions, as well as delivery condi-
tions of the manufacturer, and the statutory regulations
valid at the time the contract was concluded, apply.
Order Hotline [phone]