Haiyang Stella Series User manual

- 1 -
Important Notice
Manual
Handling Keep this manual in a safe place where you can access it quickly.
The Global Positioning System (GPS) consists of a total 24 GPS satellites that orbit the earth,
enabling you to determine your position anywhere in the world, 24 hours a day, if you can receive
satellite signals. During actual navigation, carefully compare the position data with all available
navigation sources such as Loran C, Decca, other navigators, charts, visual navigation, depth, water
temperature and others. It is your responsibility to make navigation judgments.
The Electronic Chart :
Only official authorized charts and notices to mariners contain all the information needed for the safety
of navigation and, as always remember, the user is responsible for their prudent use.
Pictorials
This manual uses the following symbols for easy understanding safety instructions. Always follow
these instructions carefully.
WARNING Always follow this safety instruction to prevent death or injury.
CAUTION
Follow this safety instruction to avoid possible injury or damage to your
property.
Symbol “△” is a CAUTION or WARNING label indicating the safety
instruction.
WARNING This symbol is an Electrical Shock WARNING label.
Symbol is an instruction that you must not violate.
(This symbol instructs NOT to disassemble the system components)
Symbol is an operation instruction that you must follow.
(This symbol shows the main power OFF instruction.)

- 2 -
WARNING <For System Operators>
Always follow this instruction to prevent death or personal injury.
Turn power off
During
abnormality.
If smoke or a small of burning occurs, a fire or an electrical
short circuit may result. Turn the power switch OFF and shut
down the power supply immediately. Never try to repair the
system yourself. Call for service.
Do not open
Cabinet. High voltage exists in the instrument. Contact with voltage may cause possible injury or death.
Do not touch back
side
of the equipment.
Harmful line voltage is present on back side of the
equipment. Never try to touch back side while power is
turned on.
Avoid excessive
shock
to display unit.
The LCD display module contains a liquid. Do not apply any
mechanical shock to the display. If the display broken, liquid
may leak and injure your skin and eyes.
Do not use with
poor
ventilation.
If you cover this unit or use in an enclosed place, it may
malfunction or become damaged as a result of overheating.
Use only where there is sufficient ventilation.
Installation Cautions <For service Personnel>
Follow installation instructions to avoid personal injury and system malfunction.
Installation in
rigid location. Mount your Stella series on a rigid frame or base to prevent your unit from working loose.
Use correct
Installation materials.
Use the installation materials provided in the standard accessory
pack only. If you use hardware of insufficient strength, your system
may loosen causing damaged.
Keep away from direct
sunlight. Keep your system out of direct sunlight as it may become damaged by overheating.
Keep away from
water. Take care not to get water on or in your unit as it may be damaged and/or cause an electrical shock.
Keep away from heat
source. Keep your system away from other heat source as it may malfunction, be damaged, or burn.

- 3 -
Use correct power
source. Operate your system within the specified power voltage. An incorrect power supply may cause
Maintenance Cautions<For Maintenance Personnel>
Use the following safety precaution internal inspection.
Discharge capacitors. High voltage may be retained in the capacitors if the high-tension
circuit several minutes after you have turned the power switch off.
Check that power is
OFF
To prevent an electrical injury due to erroneous power switching, make
sure that the main power supply and the system power switch are both
in the off position. Additionally, attach a safety label showing that
service is in progress.
Avoid EMI. Take care not to damage the ESDs (Electrostatic Sensitive Devices) by
static electricity from carpet and cloths.
Avoid dust. Wear a safety mask so as not to breath in dust during inspection or
cleaning inside your system instruments.
Operation Notes <For operators>
Observe the following operation notes, otherwise the system failure or deterioration can result. And
periodical inspection and maintenance are required for keeping the system in an optimum condition.
Backup important data. The waypoint and other registered data may become unreadable by unexpected failure. We recommend recording this data
separately.
Use correct transducer
only.
If you use incorrect transducer, the transmitter circuit may be
damaged due to a matching error. Consult is for system
information.
Check transducer
Connection before
power on
Do not turn the power switch ON if the transducer is disconnected
or if it is not inserted into the water. If done, the transducer or
transmitter circuit may be damaged.
Always clean
the transducer
Since transducer performance can drop due to accumulated
bottom growth, keep the transducer clean. Never paint transducer
surface.

- 4 -
Transducer must be
installed by authorized
personnel. Consult us for transducer installation by authorized personnel.
WARNING This product is designed to assist a navigation.
When you are sailing, use the certified chart from the Government
or IMO.

- 5 -
Stella Series System
Welcome
Stella series opens a new chapter of performance and integration in vessel navigation system display
and management. Whether you are a Cruiser or Sport fisherman or both, Stella series gives you the
information you need.
CAUTION
Stella series is Color LCD Charting Systems employs the latest in proven technology to provide
accurate navigation information. The Plotter functions of Stella series are totally dependent upon the
capability of the navigation source to provide accurate position information. This device is only an aid
to navigation. It should be used in conjunction with all other navigation accuracy. For safety, always
resolve any uncertainty before continuing navigation.
CAUTION
The Stella series employs the latest in proven technology to provide accurate navigation information.
The Plotter functions of Stella series are totally dependent upon the capability of the navigation source
to provide accurate position information. This device is only an aid to navigation. It should be used in
conjunction with all other navigation accuracy. For safety, always resolve any uncertainty before
continuing navigation.
DISPLAY BREAKAGE WARNING
The LCD display module contains a liquid. If the display is broken and the liquid contacts your skin,
wash it off immediately in running water for 15 minutes. If the liquid contacts your eyes, immediately
flush your eyes with running water for 15 minutes. Contact a physician if any abnormal symptom is
experienced.

- 6 -
Stella Series System
Welcome
The Stella series opens a new chapter of performance and integration in vessel navigation system
display and management. Whether you are a Cruiser or Sport fisherman or both, 650 gives you the
information you need.
CAUTION
The Stella series employs the latest in proven technology to provide accurate navigation information.
The Plotter functions of Stella series are totally dependent upon the capability of the navigation source
to provide accurate position information. This device is only an aid to navigation. It should be used in
conjunction with all other navigation accuracy. For safety, always resolve any uncertainty before
continuing navigation.
There is no direct relationship between the color of water areas and their depth. The navigator shall
always query the area for depth information and use the official paper chart.
CAUTION
The performance of LCD displays is degraded by continuous direct exposure to ultraviolet rays. Locate
your Stella series Display away from direct sunlight. When not in use. Keep the display covered.

- 7 -
Stella Series System
DISPLAY BREAKAGE WARNING
The LCD display module contains a liquid. If the display is broken and the liquid contacts your skin,
wash it off immediately in running water for 15 minutes. If the liquid contacts your eyes,
immediately flush your eyes with running water for 15 minutes. Contact a physician if any abnormal
symptom is experienced.
INDICATION NOTICE
*: It is important or warning notice on front of article
#: It is only functions for the Combo unit on front of article.
[ ]: Keyboard.

- 8 -

- 9 -
Getting Started
1. The Keyboard
1.1. Chartplotter
KEY Description
use this to select menu items, move the on-screen cursor
Rotary: use this to select menu items
Button: push the end of the everything to confirm a selection or entry
Change the chart of scale
Open the menu
Select the Goto function
Select the configuration & modification you wish.
Choose your favorite function.
Press to place a waypoint and access the waypoint option.
Press and hold to place a MOB marker at your current position.
Start and stop AIS tracks & Vessel tracks .
Cancel the setting or exists from the menu
Power on/off, Restart, Control BRG, Day/Night, Lock touch screen, WiFi,
Bluetooth, Data layout, Browser.

- 10 -

- 11 -
1.2. Chartplotter+Fishfinder
KEY Description
use this to select menu items, move the on-screen cursor and Choosing the
frequency
Rotary: use this to select menu items and Adjustment of gain & STC level with
turning.
Button: push the end of the everything to confirm a selection or entry
Change the chart of scale and Setting up the depth range
Open the menu
Select the Goto function
Select the configuration & modification you wish.
Choose your favorite function.
Press to place a waypoint and access the waypoint option.
Press and hold to place a MOB marker at your current position.
Start and stop AIS tracks & Vessel tracks .
Cancel the setting or exists from the menu
Power on/off, Restart, Control BRG, Day/Night, Lock touch screen, WiFi,
Bluetooth, Data layout, Browser.

- 12 -
1.3. Chartplotter+Fishfinder
KEY Description
use this to select menu items, move the on-screen cursor and Choosing the
frequency
[FUNC1][FUNC2]
[FUNC3] Setting up Using Frequently key function.
[+][-] Change the chart of scale and Setting up the depth range
[MENU] Open the menu
[MODE] Selects the map orientation & Fishfinder mode.
[PAGE] Select the configuration & modification you wish.
[SELECT] Selects the key, when plotter and Fish finder are displayed on the screen.
Turns the cursor on/off.
[QUICK NAV] Uses instant navigation.
[TRACK ON/OFF] Start and stop AIS tracks & Vessel tracks.
[WPT INPUT] Press to place a waypoint and access the waypoint option.
[STOP NAV] Stops the present navigating.
[TRACK COLOR] Changes the color of the tracks.
[WPT COLOR] Changes the color of the WPT.
[SETUP NAV] Changes and sets up WPT and route.
[TRACK ERASE] Erases the tracks.
[WPT SYMBOL] Changes the symbol of the WPT.
[CLEAR] Cancel the setting or exists from the menu.
[ENTER] The end of the everything to confirm a selection or entry

- 13 -
1.4. How to use
(Fig.1.1)
1.3.1. Turn on
Switch on.
1.3.2 Turn off
1.3.2 Turn off
Choose “Power off” on (Fig. 1.1).
1.3.3 Restart
Choose Restart on (Fig. 1.1).
1.3.3. Adjust brightness
Choose “Brightness” on (Fig.1.1).
1.3.4. Use day/night mode
Choose “night mode” on (Fig.1.1).
Power “on/off”, brightness and day/night mode.
(Fig.1.2)

- 14 -
1.3.6. How to lock the tough screen
Keep pressing “Toughlock” on (Fig.1.1) and the color changes to orange and activate. In touchlock,
touch icons disappear on the screen and deactivate. For activate, keep pressing “ToughLock”.
1.3.7. WiFi
Choose “WiFi” on (Fig.1.1).
1.3.8. Bluetooth
Choose “Bluetooth” on (Fig.1.1).
1.3.9. Data Layout
Choose “Data Layout” on (Fig.1.1).
(*For detailed information, PLS refer how to use data layout)
1.3.10. Sky Mate
Choose “Sky Mate” on (Fig.1.1).
1.3.11. Web Browser
Choose “WWW” on (Fig.1.1).

- 15 -
2. Specification of the connectors
2.1. Metal connectors

- 16 -
2.2. Plastic connectors

- 17 -
3. Screen Overview
3.1. Chartplotter page
①Vessel icon The present position.
②Cursor Showing the cursor icon.
③AIS target Showing the received AIS target.
④Databar Showing various data on the top or bottom.
⑤Cursor INFO The information of the cursor.
⑥WPT INFO The information of WPT such as LAT/LOT, Range, etc.
①
④
③
②
⑤
⑦
⑥

- 18 -
3.2. Fishfinder page
.
①Palette Showing the chosen colors.
②Depth bar The current depth.
③Low Frequency Showing 50KHz.
④High Frequency Showing 200KHz.
⑤LF INFO The information of Low Frequency, 50KHz.
⑥HF INFO The information of High Frequency, 200KHz.
⑦Databar Showing various data on the top or bottom
⑦
⑤
⑥
③
④
⑤
⑥
①②
⑦

- 19 -
3.3. Navigation Data page
3.3.1. Navigation Data Type1
3.3.2. Navigation Data Type2

- 20 -
3.4. Highway page
①WPT name The current WPT name.
②Direction of steer The best direction of the steering.
③WPT icon The remaining distance of the WPT.
④Vessel The out of the range from the best.
⑤XTE Range The range of the XTE alarm.
⑥Navigation Data The information of the various data.
①
②
⑥⑤
③
④