
How to install the battery
How to use it
1.Turn the switch on the stun car and remote control to the
“OFF”position.
2.Use a Phillips screwdriver to open the battery cover.
3.Insert the rechargeable battery, as shown in Pic 1.
4.Close the battery cover.
1.Turn the switch on the remote controller to the “ON” position.
2.Turn the switch on the stun car to the “ON” position.
3.You can start to use the remote controller to control the car.
4.If the remote controller can’t control the car, maybe the
battery in the car need to be charged.