Hamilton Beach HBF1100S series User manual

840252800
9/15
HBF1100S Series
4 Liters
For more visit www.hamiltonbeachcommercial.com
GB High-Performance Food Blender
Operation Manual – Original Instructions (2)
FR Mélangeur Haute Performance
Manuel d’utilisation – Traduction des
instructions en anglais (8)
ES Licuadora de Alimentos de Alto Desempeño
Manual de Operación – Traducción de las
Instrucciones de GB (14)
PT Liquidificador de Elevado Desempenho
Manual de Utilização – Tradução das Instruções
em Inglês (GB) (20)
IT Frullatore ad alte prestazioni
Manuale per il Funzionamento – Traduzione delle
istruzioni dall ’ inglese (26)
DE Leistungsstarker Speisemixer
Bedienungsanleitung – Übersetzung der
britischen Betriebsanleitung (32)
NL Blender met hoge prestaties
Handleiding – Vertaling van Engelstalige instructies (38)
DK Højeffektiv mad blender
Brugerhåndbog – Oversættelse af GB instrukser (44)
SE Mixer med hög prestanda
Bruksanvisning – Översättning av brittiska
instruktioner (50)
NO Blender med kraftig ytelse
Brukerhåndbok – Oversettelse av instruksjoner for GB (56)
GR Μπλέντερ τροφίμων υψηλών επιδόσεων
Εγχειρίδιο χρήσης του – Μετάφραση των οδηγιών από τα
Αγγλικά στα Ελληνικά (62)
RU Высокофункциональный пищевой блендер
Руководство по эксплуатации – Перевод инструкций с
английского языка (68)
TU Yüksek Performanslı Blender
Kullanım Kılavuzu – GB Talimatlarının Çevirisi (74)
CN 儈ᙗ㜭伏⢙ᨵ᣼ᵪ
󰪞֌ᤷই*%䈤᰾Ⲵ㘫䈁(80)
KR High-Performance Food Blender
یࡈ۶ָ۰ – ࠒח۶ָ۰ءࠇق (86)
SA خلاطة الطعام عالية الأداء
(97) GB ترجمة تعليمات – دليل التشغيل
Good Thinking®

2
Food Blender Safety
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:
•All supervisors and staff must read the
operation manual and be trained on
the proper requirements for safe use
and servicing. Keep operation manual
accessible for reference.
•Before first use, wash container
assembly in hot, soapy water. Do NOT
place in dishwasher.
•Plug into an earthed socket.
•Do not remove ground.
•Do not use an adapter.
•Do not use an extension cord.
•Disconnect power before cleaning or
servicing.
•To reduce risk of personal injury, unplug
cord from socket when not in use and
before putting on or taking off parts.
•Unplug the blender and inspect the
power cord insulation for cracks on
a weekly basis. Refer to “Technical
Services” for repair or replacement.
•To protect against electrical shock, do
not immerse cord, plug, or blender base
in water or any other liquid.
•Do not clean equipment with a water jet.
•Extreme caution must be used when
moving an appliance containing hot oil
or other hot liquids.
•Do not use appliance for other than
intended use.
•This appliance is not intended for use,
cleaning, or maintenance by persons
(including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge,
unless they are given supervision
and instruction concerning use of the
appliance by a person responsible for
their safety.
•Not intended for use by or near children.
Children should be supervised to ensure
that they do not play with the appliance.
•The use of accessory attachments and
spare parts not recommended by the
appliance manufacturer may cause
injuries.
•To reduce risk of personal injury and to
prevent damage to blender or container
and cutter assembly, DO NOT insert
utensils into blender container while
operating blender. Inspect blades daily.
•Do not store any kitchen utensils in the
container because the blender would be
damaged if inadvertently turned on.
•To avoid a crush hazard and prevent
possibility of serious personal injury,
keep hands out of blender container
while operating blender.
•Avoid contacting moving parts. Switch
OFF (O) the appliance and disconnect
from power supply before changing
accessories, approaching parts that
move in use, and before servicing.
•Blades are sharp. Handle carefully.
•If cutter assembly blades are loose,
discontinue use immediately and replace
cutter assembly. Do not attempt to
repair or tighten cutter assembly.
•Inspect container and cutter assembly
daily. Do not use broken, chipped, or
cracked container. Check cutter for wear,
nicks, or broken blades. Do not use
broken, loose, or cracked cutting blades.
•Do not use outdoors.
•This appliance is intended for short
periods of operation, with a rated
operating time of 3 minutes.
•Do not leave blender unattended while it
is operating.
GB

3
•To prevent damage to blender,
container, or cutter assembly, DO
NOT move or shake blender while
in operation. If blending action stops
during operation, turn blender OFF (O),
remove container from base, remove
container cover, and use a thin rubber
spatula to push mixture towards cutters.
•When blending hot liquids, remove
center piece of two-piece lid. Hot liquids
may push lid off jar during blending.
To prevent possible burns: Do not fill
blender jar beyond the 1 quart (946 ml)
level. With the protection of an oven mitt
or thick towel, place one hand on top of
lid. Keep exposed skin away from lid.
Start blending at lowest speed.
•Always operate blender with container
cover in place.
•This blender is designed with motor
overload protection. If the motor stops
during operation due to overheating,
unplug the unit and allow it to cool
down for 15 minutes. Plug unit back
in after 15 minutes to resume normal
operation.
•The normal function of this product may
be disturbed by strong electromagnetic
interference. If this occurs, simply
reset the product and resume normal
operation by following the operation
manual. If normal operation cannot be
resumed, place the product in a different
location.
•Do not operate any appliance with a
damaged supply cord or plug, or after
the appliance malfunctions or has been
dropped or damaged in any manner.
Supply cord replacement and repairs
must be conducted by the manufacturer,
its service agent, or similarly qualified
persons in order to avoid a hazard. Call
the provided customer service number
for information on examination, repair,
or adjustment.
•Do not attempt to bypass interlock
features.
•The equipment is provided with a power
switch/circuit breaker. If the motor stops
turning, reset the switch.
•UK ONLY: If fitted with a non-rewirable
U.K. plug, the 13-amp fuse approved by
ASTA to be B.S. 1362 must be used. If
you need a replacement fuse carrier, it
must be replaced with the same colour-
coded carrier with the same markings.
Fuse covers and carriers can be
obtained from approved service agents.
– SAVE THESE INSTRUCTIONS –

4
Sanitizing
Sanitize using 1 tablespoon (15 ml) of household bleach per 1 gallon (3.8 liter) of clean, cool water (60°F/16°C),
mixed according to the instructions on the bleach.
1. Fill container with sanitizing solution, replace cover and filler cap, and run on LOW (1) speed for 2 minutes.
Empty container.
2. Wipe exterior with soft cloth dampened with sanitizing solution.
3. Immerse lid, blending jar with cutter assembly, and dosing cup in sanitizing solution for 2 minutes.
4. Place empty container on base and run on HIGH (10) speed for 2 seconds to remove any moisture from the
cutter assembly.
5. When ready to use, rinse with clean water.
WARNING
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into an earthed socket.
Do not remove earthing connections
and plug.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
WARNING
Cut Hazard
The blending blade is sharp. Use care when
cleaning or replacing.
Do not put hands, spoons, or other utensils
in container when blending.
Always place lid on container when
blending.
Disconnect power before replacing parts or
servicing.
Failure to follow these instructions can result
in broken bones, cuts, or other injuries.
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this drink mixer signifies that this equipment should be taken over
by a selective collection system conforming to the Guideline 2002/96/EC (WEEE) so that it can be either
recycled or dismantled in order to reduce any impact to the environment. The user is responsible for
returning the product to the appropriate collection facility, as specified by your local code. For additional
information regarding applicable local laws, please contact the municipal facility and/or local distributor.
Technical Services
For assistance or replacement parts, call our
Technical Services number:
+ 1-910-693-4277
www.hamiltonbeachcommercial.com
This equipment is intended for professional use and should be used by trained and qualified personnel only.
The EC declaration of conformity for this equipment is available in the Technical Support
section of our website www.hamiltonbeachcommercial.com.
FOR COMMERCIAL USE ONLY
98 99 101
Noise Level
The equivalent continuous sound level when
equipment is operating at maximum speed on
no-load is less than 85 dB(A).

5
Parts and Features
To load custom programs with the memory card:
1. Turn OFF (O) and unplug unit.
2. Remove the memory card cover.
3. Insert memory card.
4. Plug in unit and turn ON (Reset) (I).
5. Wait 3–5 seconds.
6. Turn OFF (O) and unplug unit.
7. Remove memory card and reinstall memory
card cover.
Stainless Steel
Blender Jar
Dosing Cup
Memory Card Cover
Jar Pad
Lid
Base
Control Panel
ON/OFF
(I/O) Power
Switch
Lid Magnet (not visible)
Lid Magnet (not visible)
Lid Latch Lid Latch
Overmolded
Handle Overmolded
Handle
Max Fill Line
Jar Collar
Clutch

6
Using the Controls
Variable Speed Control
Speeds 1–10. Works with VARIABLE or CHOP functions.
HIGH
Speed starts LOW and ramps to HIGH.
VARIABLE
Works with Variable Speed Control.
CHOP
Works with Variable Speed Control.
PULSE
Press and hold for desired time.
P1 and P2
Preset program buttons. P1 and P2 can be changed to a different
preprogrammed cycle.
Interlock Lid Indicator Light
The red light will flash when lid is not in place.
The red flashing light will stop when lid is in place and blending can
start.
Thermal Overload Protection
Temperature gauge alerts operator if motor overheats while blending
back-to-back batches.
LED Lighted Preset Timer Panel
Programmed for 30 seconds, 1 minute, 2 minutes, and 3 minutes.
NOTE: 3 minutes is the default setting.
STOP
Press STOP or any button to stop operating.

7
Operation
• Plug in blender.
• Turn switch ON (I).
• The 3-minute (3:00) LED light is the default time on the control panel when plugged in.
• Interlock lid red indicator light will be flashing.
• When jar and lid are in place, light will stop flashing.
• START by using the controls below.
• Select an option:
• Press any timer button (:30, 1:00, 2:00, 3:00) and press HIGH, OR
• Press any timer button (:30, 1:00, 2:00, 3:00), press VARIABLE, and turn variable speed dial, OR
• Press any timer button (:30, 1:00, 2:00, 3:00), press CHOP, and turn variable speed dial, OR
• Press PULSE. Pulse is not associated with the timer buttons.
• Press STOP or any button to stop operation.
Troubleshooting Guide
Problem . . . Solution . . .
Blender fails to start
or stops while it is
running and cannot be
restarted.
• Check to see if unit is securely plugged into an electric socket.
• Check to see if the fuse for the electric socket has blown or if a circuit breaker has
tripped.
• Check control panel for red flashing interlock lid light. Realign lid. Start blending.
• The motor is overheated. Try mixing smaller batches or running for shorter cycle
times. Allow motor to cool between batches.
Ingredients will not
mix properly. • Check to see if enough liquid has been added to the ingredients. Mixture should be fluid and free-running at all times.
• Solid pieces are too large. Cut pieces smaller.
• Cutters are not sharp or are damaged. Inspect container and cutter assembly daily.
Replace container and cutter assembly if damaged.
• Check to see if cutter assembly is installed properly.
• Select speed to create a fluid blend.
Maintenance
Daily Unplug the blender, remove the container from the base, and then inspect the container
and cutter assembly for wear, nicks, and broken or loose blades. If the blades are nicked,
broken, or loose, discontinue use immediately and replace the container or cutter
assembly. See “Replacement Parts” on website www.hamiltonbeachcommercial.com.
Weekly Unplug the blender, and then inspect the power cord insulation and power plug for cracks.
Refer to “Technical Services” for repair or replacement. Remove jar from blender base.
Inspect the cutter assembly by rotating the drive end of the cutter assembly by hand. It
should turn smoothly. If it does not, replace the container or cutter assembly.
Inspect the blender and its various parts and replace as follows:

104
4421 Waterfront Drive
Glen Allen, VA 23060
840252800
9/15
www.hamiltonbeachcommercial.com