Hamlet Exagerate XFW2EXC User manual

EXPRESS CARD FIREWIRE
2 Port FireWire 400 ExpressCard/34
USER MANUAL
XFW2EXC
www.hamletcom.com

Dear Customer,
thanks for choosing an Hamlet product. Please carefully
follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to
dispose of it in an environmentally friendly way, by
putting it in the separate bins for electrical/electronic waste, or to
bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and
components in compliance with ROHS directives: 2002/95/CE; with
RAEE Directives: 2003/96/CE, Italian Legislative Decree 2005/151
and below EEC Directives: EN 55022: 2006+A1: 2007,
EN 55024: 1998+A1: 2001+A2: 2003, EN 61000-3-2: 2006,
EN 61000-3-3: 1995+A1: 2001+A2: 2005.
Trademarks
All trademarks and company names mentioned in this manual are
used for description purpose only and remain property of their
respective owners.
Changes
The material in this document is for information only and subject to
change without notice. Hamlet reserves the right to make changes
or revisions in the product design or the product manual without
reservation and without obligation to notify any person of such
revisions and changes.

Introduction
System Requirements
•Windows 2000/XP/Vista
•One available ExpressCard slot
Package Contents
•2 port FireWire 400 ExpressCard
•6pin-4pin FireWire cable
•Resource CD
•User Manual
Installation
1. Insert the card into an available ExpressCard slot.
2. The system will detect the new device and install the required
driver automatically.
Verifying the installation
Follow the instructions in this section to verify that the controller was
installed correctly.
1. Right click the My Computer icon, select Properties, left click
on the Hardware tab and then on the Device Manager button.
2. Double click on “IEEE 1394 Bus host Controllers”. If there is no
yellow ! or ? in front of “Texas Instruments OHCI Compliant
IEEE 1394 Host Controller” the driver has started correctly.
3. To view information about the devices attached to the controller,
right click on Devices and select Properties from the context
menu, then select the tab labelled General.