Hamlet HDSL640 User manual

HDSL640
ADSL USB Modem
User’s Manual

Contents
CHAPTER 1 1
INTRODUCTION 1
1.1 HDSL640 ADSL USB Modem Features 1
1.2 Package Contents 2
1.3 The Front LEDs 2
1.4 Information from ISP 2
CHAPTER 2 4
INSTALLATION 4
2.1 Installing the HDSL640 ADSL USB Modem 4
2.2 Installing the HDSL640 ADSL USB Modem Drivers 5
2.2.1 For Windows 98 5
2.2.2 For Windows Me 9
2.2.3 For Windows 2000 13
2.2.4 For Windows XP 18
CHAPTER 3 26
CONFIGURATION 26
3.1 USB ADSL LAN Adapter Configuration 28
3.1.1 For Windows 98 / Me 28
3.1.2 For Windows 2000 / XP 31
3.2 USB ADSL WAN Adapter Configuration 34

1
Chapter 1
Introduction
1.1 HDSL640 ADSL USB Modem
Features
The HDSL640 ADSL USB Modem provides the following
features:
♦ Bus-powered USB modem for broadband ADSL.
♦ Downstream data rate up to 8 Mbps and upstream up to 1
Mbps.
♦ No external power supply is required.
♦ Hot Plug and Play for Microsoft Windows 98 (SE), 2000,
Me, and XP.
♦ Supports NDIS interface for RAS and Dial-Up Networking.
♦ Software upgradable.
♦ Supports multiple data encapsulation formats, including
PPPoE, PPPoA, IPoA, and RFC1483 bridged or routed.
♦ Friendly GUI Configuration Program.

HDSL640 ADSL USB Modem
2
1.2 Package Contents
The product package comes with the following accessories:
1. One HDSL640 ADSL USB Modem
2. One installation CD with drivers and online manual
3. One RJ-11 ADSL telephone cable
4. One USB cable
5. One Quick Start Guide
1.3 The Front LEDs
LED Meaning
USB When this LED is lit, it indicates that the USB port
is connected to the PC and working properly.
ADSL When lit, it indicates that the ADSL (Line) port is
connected to the DSLAM and working properly.
TXD Flashes when transferring data.
RXD Flashes when receiving data.
READY When lit, it indicates that the device is working
properly.
1.4 Information from ISP
Before you start installing this device, you have to check with
your ISP what kind of service (connection method) is provided
such as PPPoE, PPPoA, RFC1483 bridged or routed, and IPoA.

Chapter 1 Introduction
3
Gather the information as illustrated in the following table and
keep it for reference.
If your ISP provides PPPoE or PPPoA connection method,
please select “USB ADSL WAN Adapter” to install driver. If
your ISP provides RFC1483 Bridged or Routed or IPoA, please
select “USB ADSL LAN Adapter” to install driver.
PPPoE VPI/VCI, VC-based/LLC-based multiplexing,
Username, Password, Service Name, and Domain
Name System (DNS) IP address (it can be
automatically assigned from ISP or be set fixed).
PPPoA VPI/VCI, VC-based/LLC-based multiplexing,
Username, Password, and Domain Name System
(DNS) IP address (it can be automatically assigned
from ISP or be set fixed).
RFC1483
Bridged VPI/VCI, VC-based/LLC-based multiplexing
RFC1483
Routed VPI/VCI, VC-based/LLC-based multiplexing, IP
address, Subnet mask, Gateway address, and
Domain Name System (DNS) IP address (it is fixed
IP address).
IPoA VPI/VCI, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP
address (it is fixed IP address).

4
Chapter 2
Installation
2.1 Installing the HDSL640
Please refer to the following instructions and figures:
1. Connect ADSL telephone cable to the LINE RJ-11 jack.
2. Connect the USB cable to the USB port and connect the
other end to the PC.

Chapter 2 Installation
5
2.2 Installing the HDSL640 Drivers
2.2.1 For Windows 98
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. You will
then see the following screen. Click “Next >”.
2. In the next window, select “Search for the best driver for your
device” and click “Next >”.

HDSL640 ADSL USB Modem
6
3. Insert the installation CD into the CD-ROM drive and
check “Specify a location”. Click “Browse…” to specify the
driver directory such as F:\Driver\LAN for installing an
USB ADSL LAN Adapter or F:\Driver\WAN for
installing an USB ADSL WAN Adapter. (Please refer
Information from ISP section for more details.) Click
“OK” and then “Next>” to continue.

Chapter 2 Installation
7
4. Continuing through the Wizard, click the “Next >” button.
Windows will start copying files to your system. Then,
click “Finish”.
5. You will see the following screen prompting for the path
of the Windows source files. Please specify a location.
Click “OK”.

HDSL640 ADSL USB Modem
8
6. The HDSL640 ADSL USB Modem driver is successfully
installed and the Status Task Bar will appear in the System
Tray.
7. The HDSL640 ADSL USB Modem icon is installed in the
Control Panel.
8. Go to the Device Manager, the “USB ADSL LAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL LAN driver installation.
Go to the Device Manager, the “USB ADSL WAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL WAN driver installation.

Chapter 2 Installation
9
2.2.2 For Windows Me
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. Select
“Specify the location of the driver” and click “Next >”.

HDSL640 ADSL USB Modem
10
2. Insert the installation CD into the CD-ROM drive and
check “Specify a location”. Click “Browse…” to specify the
driver directory such as F:\Driver\LAN for installing an
USB ADSL LAN Adapter or F:\Driver\WAN for
installing an USB ADSL WAN Adapter. (Please refer
Information from ISP section for more details.) Click
“OK” and then “Next>” to continue.

Chapter 2 Installation
11
3. Continuing through the Wizard, Windows will start
copying files to your system. Then, click “Finish”.

HDSL640 ADSL USB Modem
12
4. The HDSL640 ADSL USB Modem driver is successfully
installed and the Status Task Bar will appear in the System
Tray.
5. The HDSL640 ADSL USB Modem icon is installed in the
Control Panel.
6. Go to the Device Manager, the “USB ADSL LAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL LAN driver installation.
Go to the Device Manager, the “USB ADSL WAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL WAN driver installation.

Chapter 2 Installation
13
2.2.3 For Windows 2000
1. Start Windows. After the opening banner, Windows will
show the new device has been detected. Click “Next>”.

HDSL640 ADSL USB Modem
14
2. Select “Search for a suitable driver for my device”. Click
“Next>”. Then, insert the installation CD into the CD-
ROM drive. In next window, check “Specify a location” and
click “Next>”.

Chapter 2 Installation
15
3. Click “Browse…”. In the Locate File window, specify the
driver directory such as F:\Driver\LAN\CxtCAFEU for
installing an USB ADSL LAN Adapter or
F:\Driver\WAN\CxtCAFEU for installing an USB ADSL
WAN Adapter. (Please refer Information from ISP
section for more details.) Click “Open” and then “Next>“ to
continue.
4. When windows titled “Digital Signature Not Found” appear,
press “Yes” to continue the installation.

HDSL640 ADSL USB Modem
16
5. Press “Finish”.
6. The HDSL640 ADSL USB Modem driver is successfully
installed and the Status Task Bar will appear in the System
Tray.
7. The HDSL640 ADSL USB Modem icon is installed in the
Control Panel.

Chapter 2 Installation
17
8. Go to the Device Manager, the “USB ADSL LAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL LAN driver installation.
Go to the Device Manager, the “USB ADSL WAN Adapter”
is under the Network Adapters, and the “HDSL640 ADSL
USB Modem” is under the Universal Serial Bus Controllers
for USB ADSL WAN driver installation.

HDSL640 ADSL USB Modem
18
2.2.4 For Windows XP
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. Select
“Install from a list or specific location” and click “Next >”.