Hamlet hv92cia User manual

- 1 -
FAX MODEM
Quick Installation Guide

- 2 -
Table of Contents
Introduction
Features .……………………………………………………………………. 3
Minimum System Requirements ………………………………………….. 3
Package Checklist …………………………………………………………… 3
Installation
Hardware Installation ……………………………………………………….. 4
Installation Procedure for Windows 98SE ………………………………… 5
Installation Procedure for Windows 2000/XP………………………………. 6
Installation Procedure for Windows ME …………………………………… 7
Installation Procedure for Windows NT4.0………………………………… 8
Modem Dialing Location
For WIN 98SE/ME/NT4.0………….………………………………………… 9
For WIN 2000/XP ………………………………………………………… 9

- 3 -
Introduction
Features
This modem card supports following communication standards.
Data
 ITU-T V.92
 ITU-T V.90, V.34, V.32bis, V.32, V.22bis, V.21, V.22
 Bell 103 & 212A
 ITU-T V.44, V.42bis & MNP 5 (Data compression)
 ITU-TV.42 & MNP2-4 (Error correction)
Fax
 ITU-T V.17 (14400bps)
 ITU-T V.29 (9600bps)
 ITU-T V.27 (4800bps)
Voice
 Voice/Audio mode
 Full-Duplex speakerphone
Minimum System Requirements
 CPU Pentium MMX 233 up
 Windows platform
 Sound Card
Package Checklist
 One Fax Modem/ One Phone cable
 One Driver CD(Quick Installation Guide included)

- 4 -
Hardware Installation
1. Power off your PC and remove the casing of PC carefully.
2. Press the modem card firmly into the free PCI slot and secure it with
screws to your PC.
3. Reinstall the casing of PC.
4. Plug the telephone line into the “Line” jack.

- 5 -
Installation Procedure for Windows 98SE
1. Once you have completed the hardware installation, power on your
computer and put the driver CD into the proper CD-ROM. The wizard will
search for new hardware. Click Cancel.
2. Change the directory to where the Windows 98 drivers resides (e.g.
D(CD-ROM):\Driver\WIN98) and double-click setup.exe and follow the
instruction to complete the driver installation.

- 6 -
Installation Procedure for Windows 2000/XP
1. Once you have completed the hardware installation, power on your
computer and put the driver CD into the CD-ROM. The wizard will search
for new hardware. Click Cancel.
2. Change the directory to where the Window 2000/XP drivers resides (e.g.
D(CD-ROM):\Driver\W2KXP and double-click setup.exe and follow the
instruction to complete the driver installation.

- 7 -
Installation Procedure for Windows ME
1. Once you have completed the hardware installation, power on your
computer and put the driver CD into the proper CD-ROM. The wizard will
search for new hardware. Click Cancel.
2. Change the directory to where the Window ME drivers resides (e.g.
D(CD-ROM):\Driver\WINME) and double-click setup.exe and follow the
instruction to complete the driver installation

- 8 -
Installation Procedure for Windows NT4.0
1. Once you have completed the hardware installation, power on your
computer and put the driver CD into the proper CD-ROM. The wizard will
search for new hardware. Click Cancel.
2. Change the directory to where the Window NT 4.0 drivers resides (e.g.
D(CD-ROM):\Driver\WINNT4 and double-click setup.exe and follow the
instruction to complete the driver installation

- 9 -
Modem Dialing Location
If you want to change your dialing location, please follow the instruction as
below:
For WIN 98SE/ME/NT4.0
Click Control Panel
-> Modems
-> Under General click Dialing Properties, and then you can change your
location.
For WIN 2000/XP
Click Control Panel
-> Phone and Modem Options
-> Under Dialing Rules click Edit, and then you can change your location.