HAMPTON BAY BELLEVILLE FCS80198ST User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this dining set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #1000-000-000
Model #FCS80198ST
USE AND CARE GUIDE
BELLEVILLE 7-PIECE C-SPRING DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Table of Contents..........................................................2
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2
Pre-Assembly
Planning Assembly
Hardware Included
Chair Package Contents
Chair Assembly
Care and Cleaning
Warranty
1 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft,
non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
HARWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
A
A
M6x18 Bolt
BB
CC
AA BB CC DD
12
24
M6x30 Bolt
M6x25 Bolt 12
DD M6x15 Bolt 8
EE
Table Package Contents ...........................................................4
Table Assembly
........................................................9
............................................................ 7
............................................................ 5
...........................................................3
...................................................................2
...................................................................2
.................................................................2
FF GG
Part Description Quantity
EE M6x20 Bolt
FF
GG
52
8
M6 Washer
Hex wrench 1

HAMPTONBAY.COM3
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
Part Description Quantity
A
Chair back 6
BRight arm 6
CLeft arm 6
DBack bar 6
A
C
B
D

4
Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
Part Description Quantity
E
Tile 14
FMetal tile 1
G
Table rim 1
HLeg connector 1
E
G
I
H
F
ITable leg 4

Chair Assembly
1
Connecting the chair back to the chair arms
Attach the chair back (A) to the right arm (B) using the M6x18 bolts (AA), M6x30 bolts (BB), and M6 washers (FF), as shown below.
Place back bar (D) into the right arm (B).
Repeat this step for the left arm (C).
HAMPTONBAY.COM5
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE:
AA
DD
DD
BB
A
D
B
Loosely tighten all bolts using the hex wrench (GG).

6
Chair Assembly (continued)
2
Securing the back bar
Attach the back bar (D) to the chair arms (B and C) using the M6x25 bolts (CC).
Tighten all of the bolts. Check and ensure the chair is tightly assembled and stable before use.
CC

Table Assembly
1
Connecting the table legs
Place the table rim (G) upside down on a soft surface.
Attach each of the table legs (I) to the table rim (G) with M6x20 bolts (EE) and M6 washers (FF).
HAMPTONBAY.COM7
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Loosely tighten all bolts using the hex wrench (GG).
G
I
EE
FF

Table Assembly (continued)
2
Connecting the leg connector to the table legs
Align the holes of the leg connector (H) with the holes on the inside of each table leg (I).
Attach the leg connector (H) to the table legs (I) using M6x15 bolts (DD) and M6 washers (FF)
8
NOTE: Tighten all bolts using the hex wrench (GG).
I
H
FF
DD

Table Assembly (continued)
3
Adding the tiles
Turn the table right side up.
Ensure all connections are secure.
Carefully place the tiles (E) and metal tile (F) onto the table rim (G).
HAMPTONBAY.COM9
Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning
For the best results, clean the dining set with a damp cloth, and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Keep the dining set out of re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Store the dining set in a dry, sheltered place when not in use.
E
F

Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service.
8 a.m. - 6 p.m., EST, Monday-Friday
1- 855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.