HAMPTON BAY Birch6.17''x25" User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this countertop. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
SOLID WOOD COUNTERTOP
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #
Model #Birch6.17'‘x25"
1007171274

2
Table of Contents
Safety Information ..................................2
Warranty ..........................................2
Pre-Installation.....................................3
Planning Installation ...............................3
Tools Required ....................................3
Installation ........................................4
Maintenance .......................................7
Care and Cleaning ..................................7
Protecting the Surface..............................7
Food Contact Considerations .........................7
Safety Information
Read and understand these instructions before installation of this
countertop.
Save these instructions for future reference.
MINNESOTA RESIDENTS
IMPORTANT HEALTH NOTICE.
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE
BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND
THROAT IRRITATION, HEADACHE, NAUSEA AND A VARIETY OF ASTHMA-
LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN
REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY
PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A
HISTORY OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT
GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG-
TERM EFFECTS OF EXPOSURE TO FORMALDEHYDE.
REDUCED VENTILATION MAY ALLOW FORMALDEHYDE AND OTHER
CONTAMINANTS TO ACCUMULATE IN THE INDOOR AIR. HIGH INDOOR
TEMPERATURES AND HUMIDITY RAISE FORMALDEHYDE LEVELS.
WHEN A HOME IS TO BE LOCATED IN AREAS SUBJECT TO EXTREME
SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE
USED TO CONTROL INDOOR TEMPERATURE LEVELS. OTHER MEANS OF
CONTROLLED MECHANICAL VENTILATION CAN BE USED TO REDUCE
LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR CONTAMINANTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS
OF FORMALDEHYDE, CONSULT YOUR DOCTOR OR LOCAL HEALTH
DEPARTMENT.
WARNING: APPLY CAUTION WHEN USING
POWER TOOLS.
WARNING: LEAVING HOT DISHES DIRECTLY ON
THE COUNTERTOP MAY CAUSE PERMANENT
DAMAGE.
CALIFORNIA RESIDENTS
WARNING: THIS PRODUCT CAN EXPOSE YOU
TO CHEMICALS INCLUDING FORMALDEHYDE
(GAS), WHICH IS [ARE] KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE CANCER.
FOR MORE INFORMATION GO TO WWW.
P65WARNINGS.CA.GOV/PRODUCTS.
Warranty
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
Report any defects noticed immediately after unpacking the product prior to installation. Ensure the countertop is installed and nished
(using oil, oil-wax, varnish) before use. Follow the instructions contained in this manual to keep the warranty valid.
NOTE: Immediately after unpacking, the countertop must be nished on both sides and all edges. It is very
important to properly coat the countertop with a high quality oil. Finish the counter top surface with particular
regard to all cutting edges and end edges, strictly to the manufacturers’ specications concerning the oil, wax
oil, or varnish.
Keep the countertop at in a fully supported position, away from direct heat and moisture and in the original packaging. This helps to avoid
excessive sanding and wood warpage.
Storing the countertop upright or on its edge, in conjunction with heat or moisture, can result in the countertop warping.
WARNING: Wooden countertops should be used in an ambient temperature of 32°F - 75°F (18°C - 24°C) and
humidity of 40-60 %.
The following features are completely natural for wood:
□Differences in color, grain, and will have some small knots.
□Wood darkens with time.
□Wood is splash proof but not waterproof and wood bres may raise if they are exposed to water for a long time.
□Wood absorbs moisture from the environment and gives it back, which can cause a change in its volume.
TO AVOID CRACKING AND SPLITTING OF WOOD:
□The installation must allow the wood to move (expand/contract):
□Do not glue the countertop down.
□Keep a 1/8 in. gap at the wall.
□Holes in the brackets or blocks must be oversized to allow the fastener to keep the top secure but allow the top to move.
□Use a exible sealant to secure your sink.
□Protecting the underside is as important as protecting the top.
□Seal the underside of the top with a water-resistant sealant.
□Additional protection may be required above dishwashers.
□Protect wood-to-wood joints.
□Seal edges with a water-resistant sealant prior to connecting the joints.
□Use mechanical fasteners to pull and hold joints together.

4
TOOLS REQUIRED
Claw hammer Safety goggles Phillips
screwdriver Level
Tape
measure Gloves Jigsaw File
Caulk
gun
Orbital
sander

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1 Planning for Expansion Gaps
□The countertop expands and contracts depending on the
microclimatic conditions of the room.
□Provide expansion gaps between the edges of the worktop
and wall, which allows for this wood movement.
□To protect your walls and hide the expansion gap, the use
of a back splash is recommended.
□Attach the back splash to the wall, and not the countertop.
Use silicone as a exible seal between the countertop and
the back splash.
2 Planning for any Cutouts
□The distance from any cut-outs for the sink, cooktops, etc.
to the end of the countertop should be greater than 4 in.
(100 mm) to maintain the strength of the countertop.
□Suspended sinks should be less than 13.5 in. (350 mm)
from the countertop end.
□Countertops with overhangs over 8 in. (200mm) will need
to be supported with larger countertop brackets
□If the countertop is mounted near a heat source like a
stove/oven keep a minimum distance of 1.5 in. (40 mm)
and ensure the side edge is protected by an additional
transverse moulding to prevent delamination.
□Use 2-3 supports regularly spaced in width, with particular
regard to the countertop ends.
Claw hammer Safety goggles Phillips
screwdriver Level
Tape
measure Gloves Jigsaw File
Caulk
gun
Orbital
sander

6
Installation (continued)
3 Protecting the Countertop from Heat
Sources
NOTE: Installing the countertop over a heater is
not recommended.
□If appliances such as a dishwasher, washing machine,
refrigerator, or oven are to be mounted under the wooden
countertop, appropriate insulation must be applied to the
underside. This will protect the top from excessive heat
and moisture.
4 Mounting the Countertop to your
Cabinets
□Mount the countertop to the cabinet frame or drill overized
holes in your support blocks.
□Using washers, screw the countertop all the way, then
withdraw the screw by a quarter turn to preserve the
natural wood work, while keeping the countertop in
position.

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
5 Joining Countertops
□When joining kitchen countertops, use two or three clamps
at each joint, depending on the width.
□It is further suggested to use suitable retainers.
6 Joining Countertops (continued)
□The required distance between banding countertops and
the sink, hotplate, dishwasher, and so forth, cannot be less
than 4 in. (100 mm), nor can the countertops be joined
within their range or at an angle.
□The edges of the cut-outs for the sink, hotplate, and so
forth, must be given greater protection. Seal the joint with
silicone.
Joint
Joint
min.
100mm
min.
100mm
No joint
above
dishwasher
Sink
Dishwasher
Hob
200 mm
-max
overhang
No joint
in cut-outs
- must be min.
100 mm from
the appliance

8
Installation (continued)
7 Mounting the Countertop to your
Cabinets
□Mount the countertop to the cabinet frame using supports
with slotted holes.
□Using washers, screw the countertop all the way, then
withdraw the screw by a quarter turn to preserve the
natural wood work, while keeping the countertop in
position.

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Maintenance
PROTECTING THE SURFACE
Solid Wood Panel - Unfinished Countertop
□One of the preferred nish procedures is to use oil or wax oil. Strictly follow the manufacturer’s instructions as to the use of any oil
or oil-wax. Once installed, the working surface must be protected with a layer of oil that provides a barrier and prevents the ingress
of water and dirt into the wood. Protective coating is sufcient when water remains on the countertop after a spill, without tendency
to spread and penetrate the wood.
Re-oiling
□Oil the countertop every three (3) to six (6) months to restore coating and each time when the surface begins to tarnish or drops of
spilled water lose their natural shape and penetrate into the wood.
Care and Cleaning
□Immediately remove any spills from the surface. Do not allow the water to lie on the surface for a long time.
□Always use protective mats or pads under hot dishes, or leave them to cool on the stove.
□When preparing food, use a chopping board and never do it directly on the countertop surface.
□Use a soft cloth and warm water when cleaning. Never use concentrated cleaning detergents, especially those containing bleach.
□Use special care products for wooden tops for daily care.
FOOD CONTACT CONSIDERATIONS
Requirement Description
Food Safe for Chopping □Must be a closed-cell wood like Birch, Maple, Walnut, or Beech.
□Must use an FDA-approved and be an edible material such as mineral oil or beeswax nish.
□Avoid chopping on the top as small cuts into the wood will expose the top to damage and make surface
cleaning more difcult.
□Cuts into the surface will require routine sanding and sealing of the top.
Food Safe for Contact □Use an FDA-approved nish for contact. Ok for doing tasks like rolling dough or general prep work.
□Do not cut on nishes that harden after application. These nishes can chip if cutting is done on them
and ingesting these small fragments can be harmful.
Open Grain Woods □Oak, Elm, and Ash have more open pores. Using a mineral oil/wax nish is not recommended.
Closed Grain Woods □Woods like Birch, Maple, Walnut, and Beech are acceptable to use with a mineral oil and/or wax nish.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.