HAMPTON BAY CAMBRIDGE PATIO SWIVEL ROCKER WITH CUSHION User manual

USE AND CARE GUIDE
Model #
Item #
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this . We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Hampton Bay!
chair
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
855-HD-HAMPTON-1
CAMBRIDGE PATIO SWIVEL ROCKER WITH CUSHION

Table of Contents
Table of Contents ............................................................ 2
Safety Information........................................................... 2
Set Up Your Furniture Properly................................... 2
Examine Your Furniture............................................... 2
Observe Weight Limits................................................. 2
Warranty ........................................................................... 2
What is Covered........................................................... 2
What is Not Covered.................................................... 2
Pre-Assembly....................................................................3
Planning Assembly........................................................3
Hardware Included........................................................3
Package Contents.........................................................4
Assembly...........................................................................5,6
Care and Cleaning............................................................7
Safety Information
SET UP YOUR FURNITURE PROPERLY
□Ensure that all parts are assembled properly and fully tightened as per the instructions.
□When placing in the desired location, ensure that all legs are resting on the same surface.
EXAMINE YOUR FURNITURE
□Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully
before additional use.
OBSERVE WEIGHT LIMITS
The weight limits for the following products are listed below:
CAUTION: If you overload your furniture, injuries
can occur.
Warranty
TWO YEAR FRAME, AND FABRIC LIMITED WARRANTY WEAVE
2
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
□Chair: 300 lbs
□Swivel Chair: 300 lbs
□Loveseat: 500 lbs
□Ottoman: 150 lbs
□Table: 50 lbs
□Sofa: 700 lbs
□Rocking Chair: 300 lbs
□Chaise Lounge: 300 lbs
□Dining Table: 100 lbs
WHAT IS COVERED
WHAT IS NOT COVERED
Contact the Customer Service Team at 855-HD -HAMPTON or visit
www.Hamptonbay.com.
1-
We warrant the frame, weave and fabric to be free of manufacturin
g
defects to the ori
g
inal purchaser for two
y
ears. For
g
lass table
top we warrant 30 da
y
s from the date of purchase.
This warrant
y
does not cover commercial use, hardware, acts of nature, fire, freezin
g
andabusive use. In addition, purchased parts
are not covered under this warrant
y
.
We reserve the ri
gh
t to make substitutions with similar merchandise, if the model in question is no lon
g
er in production.
□Dining Chair: 200 lbs

3
Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning
assembly.
HARDWARE INCLUDED
NOTE: More one person may be requiredthan
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
complete the assembly of this product.to
Don't cut the string on the swing before assembled.
Part Description Quantity
AA 8
BB Washer
φ10
CC Cap for bolt 10
DD
Hex wrench 1
AA BB CC DD
φ
1/4x35mm
6mm
4mm
φ
6mm
EE
2
Bolt
Bolt
1/4x20mm
φ
EE
FF
Hex wrench 1
5mm
FF

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Seat 1
B Back 1
C Left arm 1
D Right arm 1
E Seat cushion 1
F Back cushion 1
B
C
D
E
F
G
GBase 1
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
A

Assembly
4
5
C
B
A
D
C
B
A
D
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
( Fig 1) ( Fig 2)
A
BB
B
DD
A
C
B
A
B
( Fig 1) ( Fig 2)
C
AA
BB
AA
AA
BB
BB
D
C
B
BB
D
A
C
B
( Fig 1)
AABB
AA BB
A
( Fig 2)
AA
CC
CC
CC
□
□
Place the chair right side up.
Fully tighten all the bolts (AA) with the Hex wrench (EE) and
cover with the bolt caps (CC).
□
Place the seat cushion (E) and back cushion (F) on the chair.
This chair is now ready for your enjoyment.
Adjust leg levelers as required.
□
( Fig 1)
( Fig 2)
E
F
1
□
Attach the back (B) to the seat (A) by aligning two holes
on the back (B) with the two holes on the seat (A). Insert
bolts(DD) with washers (BB) .
Hex wrench (EE) . Do not
tighten completely.
Tighten half way using the
□
Attaching the back
□
□
Attach the left arm (C) to seat (A), fasten with bolts (AA) and
washers (BB).
Attach the back (B) to the left arm (C) by aligning the hole on
the back (B) with the hole on the left arm (C).Insert bolts(AA)
with washers (BB) and tighten half way using the Hex wrench
(EE). Do not tighten completely. ( Fig 2)( Fig 2)
Tighten half way using the Hex wrench(EE).
Do not tighten completely.
( Fig 2)( Fig 2)
( Fig 1)
Attaching the left arm
2
3
Attaching the right arm Attaching the caps
□
□
Attach the right arm (D) to seat (A), fasten with bolts (AA)
and washers(BB).
Tighten half way using the Hex wrench
(EE). Do not tighten completely.
Attach the back (B) to the right arm (D) insert bolts (AA)
with washers (BB) and tighten half way using the Hex
( Fig 1)
( Fig 2)
wrench (EE). Do not tighten completely.

Assembly
6
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
G
7
□
E
F
Place the seat cushion (E) and back cushion (F) on the chair.
□
This motion chair is now ready for your enjoyment.
Completing the assembly
□
Place the motion chair right side up.
Pay attention
when 4 bolts attached the 2 arms. Two people working
on this part is recommended.Firstly,tighten all four bolts
Half tighten each bolt first, fully tighten all the bolts
□
half way by aligning in proper position.Tighten
completely afterward.
8
5 Preassembling the base
□
Don't cut the string on the swing before assembled.
Attach the base (G) to the right arm (D) and the left arm (C).
Cut string in one swing of the base (G). Aligning the built-in
□
bolts on the base with the holes on the arms. Half tighten
6
□
□
Repeat setup 4 for other 3 three swings. Please remind don't
cut the string on the swing before assembled.
□
□
Put the base (G) into the surface of the bottom of the seat.
Attaching the base
Place the chair upside down on the box as illustrated.
Make sure the chair in horizontal plane.
the bolts using the Hex wrench (FF).
FF
FF
FF

7
Care and Cleaning
□
□If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water.
Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink.
□Do not use bleach or solvents on fabrics. When cleaning the table top make sure to use a soft, clean cloth that
a cool, dry place.
does not bleed color as well.
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. When not in use, store furniture in
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-

Questions, problems, missing parts? Before returning to the store,
call Home Depot Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
Retain this manual for future use.
HAMPTONBAY.COM
855-HD-HAMPTON-1